You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Dead or alive, doesn't matter, need a pair so I can unsolder and remove the 'male' connector and re-solder to my new ones.
Guy who fixed mine fried the old ones, got nice new replacements but connectors don't match, don't want to trash the old ones (car is all original) in the process.
Any help greatly appreciated...
This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!
__________________ Bob
'87 Formula TPI 5-speed
Sponsored Links
Registered users do not see this ad. Click here to register for free!
Thanks for the offer but found the solution after a lot of searching around last pm on google.
You can buy a harness to convert your speakers to aftermarket and it is pretty cheap. It is the Metra # 72-4500, runs about $7-8 for a pair through Amazon.com.
It has the male snap connector for the GM harness, and spade type connectors for the aftermarket speaker terminals. Mine will be here next week, will report on how it works.
Thanks for the offer, though. You wouldn't have a clean pair of black speaker grilles would you? What else do you have from your 88 left?
I made a set myself.I had quite a few aftermarket speaker connectors here.I just cut off the harness pieces from a set of factory speakers and spliced them onto the aftermarket spade connector ends.
