WTB 84-88 Steering Column
#1
Junior Member
Thread Starter
iTrader: (2)
Join Date: Apr 2014
Location: Perryopolis, Pa
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 Camaro Z28
Engine: Chevy 305
Transmission: 700r4
WTB 84-88 Steering Column
Id like to buy a column for an 84-88 third gen, i recently bought one from an 89 and got screwed because the tilt wheel had a ton of play in it. Looking for one in good condition with a key, working wipers, turnsignals etc. so i can just bolt it in and enjoy my car again! also must be tight with no play in it. Let me know what you guys have and how much you are asking. Located near Greensburg, PA will drive about an hour but any further it will need shipped/
#2
Supreme Member
iTrader: (4)
Join Date: Sep 2004
Location: MN
Posts: 2,069
Likes: 0
Received 3 Likes
on
3 Posts
Car: 85 SC, 86 Berlinetta
Engine: V6, V8
Transmission: 700r4, 700r4
Re: WTB 84-88 Steering Column
I have one in good condition. The tilt is tight and has a key. Edit: print on stalk has fade. Can't guarantee the signals, wipers etc., but have no reason to doubt that they work. If there is a way to test them with a meter I can do that, just let me know what to do.
The leather steering wheel was like new so I imagine the rest of the car was well taken care of.
PM me if you are interested and/or want pics. Actual zip helps more for shipping estimates.
The leather steering wheel was like new so I imagine the rest of the car was well taken care of.
PM me if you are interested and/or want pics. Actual zip helps more for shipping estimates.
Last edited by Scorpner; 09-29-2014 at 07:12 PM.
#3
Supreme Member
iTrader: (4)
Join Date: Sep 2004
Location: MN
Posts: 2,069
Likes: 0
Received 3 Likes
on
3 Posts
Car: 85 SC, 86 Berlinetta
Engine: V6, V8
Transmission: 700r4, 700r4
Re: WTB 84-88 Steering Column
It only takes three images and has a size limit too, so I made a composite image to fit it in.
The middle image is the high beam switch and clicks when depressed, it is partially installed. The other rod is is for the ignition switch which is not included. The key is not original, but is the "A" version in case you are interested in the period of the cylinder. The fade can be seen in the other pic but is not very clear -sorry. I was in a hurry as I wanted to get something before it became too dark. the last pic shows that the horn receiver is in good condition.
The middle image is the high beam switch and clicks when depressed, it is partially installed. The other rod is is for the ignition switch which is not included. The key is not original, but is the "A" version in case you are interested in the period of the cylinder. The fade can be seen in the other pic but is not very clear -sorry. I was in a hurry as I wanted to get something before it became too dark. the last pic shows that the horn receiver is in good condition.
Last edited by Scorpner; 09-29-2014 at 07:51 PM.
#4
Junior Member
Thread Starter
iTrader: (2)
Join Date: Apr 2014
Location: Perryopolis, Pa
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 Camaro Z28
Engine: Chevy 305
Transmission: 700r4
Re: WTB 84-88 Steering Column
im sorry im not exactly sure what you mean by the ignition switch is not included, is that at the bottom of the column and i will be able to swap my old one in easily? Also how much are you asking? my zip is 15473...its a Pennsylvania zip. Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
sjorgens
Suspension and Chassis
7
10-01-2015 07:54 PM