InteriorDiscussion about interior modifications like dashboard swaps, seat replacements, or general interior repair.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
BADNBLK- what did u do to your dash pad fiberglass it loos badass
This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!
__________________
"Real cars don't power the front tires, they lift em'."
86' Trans Am- 85 LG4 with 77 non cc qjet elderbrock intake manifold...hedman headers( shorty style)..3" piping flowmaster 80 series..no emissions...4thgen center console..restored interior..2400watt system..700r4 with 2200 stall and corvette servo, shift kit..2.73 Posi..Torque Thrust II's.. FINALLY building my first 350
Sponsored Links
Registered users do not see this ad. Click here to register for free!
It looks like everyone has put some hard work into some sharp looking interiors.Here's a couple pictures of my '83's interior.I'm still working on her but she's starting to look pretty good.
__________________ '02 Envoy SLT 4DR 4WD 4.2/4L60E/4.10/G80,K&N,PCM4Less,HiPo cat,Dynomax catback
'83 Z/28 LU5 305 CFI/K&N/Factory Dual Electric Fans/MSD-Hypertech Coil/Performance Rebuilt 700R4/JG1/J65/G80/G92-3.23/Hollow 36mm front-24mm rear bar,TDS steering brace,16" single stripe IROC with Summitomo HTR-H4/T-tops/Pwr everything
'73 C-10 CST 454/TH400(Factory BB Truck)A/C,Tilt,12 Bolt Posi,Dynomax
Miss my '70 Monte Carlo SS454
I've got a 92 camaro RS and it needs new seat covers. I'de rather not get leather due to the cash involved but im looking for something nice. I'm looking for red and black seat covers and if possible with "camaro" embroidered in them or the chevy bow tie. I'm welling to pay money for something nice. pleez help me find wht im looking for. Thank you.
hey night rider how many camaro's u got? i can count three in the background
__________________ Burnin' Hard Loose And Clean.
Customization is key in my view. The little things count so........make your ride UNQUIE
-91 Firebird Bod kit
-87 Trans Am front end
-Fog lights where turn sigs where Turns sigs where Fog lights go
- and i havn't stopped yet just ran outta money http://www.thirdgen.org/techboard/bo...rans-bird.html
My ride is one of a kind and will always be one of a kind
where are your five point harnesses bolted to because im not sure so dont take my word for it but i dont think they are sefe going straight down like that they should go at a certain angle.but you should ask someone who knows more about it than me.
just a heads up!
also how are those seats? and how was the install? im prob going to get all black ones
where are your five point harnesses bolted to because im not sure so dont take my word for it but i dont think they are sefe going straight down like that they should go at a certain angle.but you should ask someone who knows more about it than me.
just a heads up!
also how are those seats? and how was the install? im prob going to get all black ones
Dont worry, the 5 points look like they are straight down in that pic because i hadn't removed the extra foot an a half of the slack out of them when i took that pic lol. They are Angled back and mounted about a foot behind the seat, and bolted to the frame and have snap-end connections using 1/2 inch bolts. I didnt just "toss" them in there. I love the seats for the price i paid. Theres not much padding to them except for the covers obviously, and they really wrap you down in there snug, ive drove around probably 40 mins at the longest interval with them and havent had any comfort issues yet. Even my g/f doesnt complain lol. You can forget about trying to turn to look behind you if you get harnesses though, you gotta start using them mirrors before changing lanes lol. For the INSTALL, i went to summit and got their Summit seat slider dual locking kit for adjustablitly, and for the mounting, i went to home depot and got 1/8 inch steel half square tubing, and basically made the seat mounts out of that, using the layout of the Summit Seat mount brackets online. Took probably 3 hours all in all, to mark and drill the holes in the floor, mount the brackets, mount the seats, and mark, drill and install the 5 points.
Last edited by urmomshot77; 03-08-2007 at 05:54 PM.
Dubcity, sure looks good....What kinda seats are those.??..I likem...Tom
----------
Urmomshot77...Tight looking as hell man....Can you show a better pic of the back area??? Thanks, Tom
Last edited by Gallileo60; 03-08-2007 at 08:15 PM.
Reason: Automerged Doublepost
Customization is key in my view. The little things count so........make your ride UNQUIE
-91 Firebird Bod kit
-87 Trans Am front end
-Fog lights where turn sigs where Turns sigs where Fog lights go
- and i havn't stopped yet just ran outta money http://www.thirdgen.org/techboard/bo...rans-bird.html
My ride is one of a kind and will always be one of a kind
The one in the dash is factory and then I added a Monster Autometer 5 inch tach. As most know the factory tachs are not totally accurate. Thats way I added the 5 inch tach.
Mono racing recliners- custom brackets. The sparco/momo brackets will set these and most other aftermarket seats about 2 inches taller than the factory seats. I customized the brackets to fit only 1/2 inch taller than my factory seat. I am 6'4 and have plenty of head room and can get my 15 year old daughter who is 5'5 sitting behind me with decent legroom and feet flat on the floor with both of us comfortable. The nice thing on these seats is they are thinner front to back in the backresrt area than the factory seats by 1 1/2 inches- thats major when it comes to legroom. I also lined the entired car with Dynamat- even on the ceiling. The car feels so much more luxurious inside and solid feeling. Also, notice the factory shoulder belts route through the guide holes of the seats.http://www.cardomain.com/member_page...2_123_full.jpg http://www.cardomain.com/member_page...2_125_full.jpg
I only have a few pics right now, but here's the dash and door panels. The front buckets are '99 Firebird seats, and front and back are like the door panels (micro-fiber inserts).
i like ive been debating on doing a custom gauge setup like that on my t/a but im not to great with electrical gizmos and i dont wanna screw anything up bit nice job man
I have my 89 trans am but only half finished from gray to black and gray.... I have the 4th gen rear seat in and I painted the dash and shifter trim pieces and changed the carpet.... Ill post pics when done.....
future mods include... Ram Air II hood, 4th gen center console w/ shifter, new two tone paint, a 91-2 trans am front, and some things I haven't thought of yet.... hehehehe...
I've got a 92 camaro RS and it needs new seat covers. I'de rather not get leather due to the cash involved but im looking for something nice. I'm looking for red and black seat covers and if possible with "camaro" embroidered in them or the chevy bow tie. I'm welling to pay money for something nice. pleez help me find wht im looking for. Thank you.
Here's something I had done to my 92 RS. The interior was all gray and the driver's seat was showing it's usual wear on the edge near the door where I slide in and out. It was less expensive to go custom than to use OEM material, I even had some embroidery work done on the headrests.
and tom, i bought them from bluezee, but i believe he bought them from hawks... and yea they both fit like a dream... perfect
I actually got them from Year One, and they're made for our body style, so the fit is like a glove.
Here's a few of mine: (don't mind the headlight switch knob missing...
I just got done putting the dash back together this morning from my guage cluster swap,
and haven't put the knob back on yet...)
future mods include... Ram Air II hood, 4th gen center console w/ shifter, new two tone paint, a 91-2 trans am front, and some things I haven't thought of yet.... hehehehe...
New Acc carpet, steering wheel recovered, 145mph speedo, all seats and door panels steam cleaned, new Hurst shifter, new headliner,seatbelt recall rebuild,floor soundproofed,new stereo,new sun visors,all window sweeps and trim replaced.
[/IMG]
[/IMG]
[/IMG] 
ive been debating on doing a custom gauge setup like that on my t/a but im not to great with electrical gizmos and i dont wanna screw anything up bit nice job man 
http://www.angelfire.com/de3/randys_place/My_Trans_Am
Click on the pics for a larger image.
