InteriorDiscussion about interior restoration, repairs, and modification.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
iam having a problem getting door panel off my 91 camaro.the top of panel is hard to get off and the rest of it is loose except top piece.any hidden clips? also has any one changed a window motor n have any special tricks?also any place to see exploded views of this? thanks everyone!
Last edited by IROCISBELL; 05-28-2009 at 10:00 PM.
Reason: poor grammer
Re: getting door panel off n power window replaced
Quote:
Originally Posted by IROCISBELL
having problem getting door panel off.91 camaro.the top of panel is hard to get off are there any hidden clips?dont want to break top of hard plastic panel.got rest of it loose except top piece off.also any one changed a motor.any special tricks?any place to see exploded views of these. thanks
Welcome to the boards, the questions you ask have been covered in full detail many times. If you do a search by using the search feature here, all your questions will be answered and in some cases with pics. I'm not trying to be mean but searching is always a good thing. I know there are a few members here who will still answer your question even though they have answered it a hundred times, instead of waiting for a response, the search button does wonders.
__________________ The facts expressed here belong to everybody, the opinions to me. The distinction is yours to draw...
A rcent sudty funod taht it deosnt meattr waht odrer the lerttes of a wrod are in, the olny imopraotnt tihng is taht the fsirt and lsat lerttes are in corrcet poistiosn. Unfaertontely, tahts not the csae for evryhtieng in lfie………………
Give a man a fish and he will eat for a day, teach a man to fish, and he will sit on a boat drinking beer for a life time
Last edited by 82 Iron Duke; 05-27-2009 at 10:42 PM.
Re: getting door panel off n power window replaced
The official way is to pull the bottom of the door panel out to a 30*-45* angle. Then push the top plastic piece in towards the window opening. that should release the clips.
Re: getting door panel off n power window replaced
Quote:
Originally Posted by IROCISBELL
ok. thanks for the help everyone.i will try n see how that works for me.sorry i didnt search it was late n i was lazy.ha!
The reason I told you to search is because the project is harder than it seems. There are alot of posts here and some people seem to make the job easier than it is. You got some vauge directions with your replies, I have taken many door panels off and you just need pratice to get it right. If you live by any jy's go pratice on some junk ones and you will get it.
Good luck
__________________ The facts expressed here belong to everybody, the opinions to me. The distinction is yours to draw...
A rcent sudty funod taht it deosnt meattr waht odrer the lerttes of a wrod are in, the olny imopraotnt tihng is taht the fsirt and lsat lerttes are in corrcet poistiosn. Unfaertontely, tahts not the csae for evryhtieng in lfie………………
Give a man a fish and he will eat for a day, teach a man to fish, and he will sit on a boat drinking beer for a life time
