help with gage cluster bulbs change them to leds - Third Generation F-Body Message Boards

dustins92camaro · 09-07-2009, 10:42 PM

i have a 92 camaro rs and i want to change the bulbs in the gage clust the and the gear shift to green and i want them i be led bulbs and i dont know wich one to get like what size i found a website it call super bright leds but i need to know wich ones to get and also for the map light and dome light i want to be led to and also green so can u help me out

Chevy8588 · 09-07-2009, 11:13 PM

194a for the cluster, dome light is a festoon, and map lights should be 194a as well

dustins92camaro · 09-07-2009, 11:16 PM

can you find the ones on superbright leds cuz i cant find them there probly right i front of my face and i want them green and bright

dustins92camaro · 09-07-2009, 11:39 PM

can you put a 12v in it for the dash lights map lights and dome light and gear shift light

Chevy8588 · 09-07-2009, 11:46 PM

yea.... car electrical is all 12 volt DC..... they are all there under 12 volt car bulbs.. read the descriptions, 194's are wedge types and festoons are well.. festoons lol

dustins92camaro · 09-07-2009, 11:55 PM

lol ok so the neowedge will work for the cluster lights and the fstoons will work ofr the dome light and the wled x4 qill work for the map lights im also getting some leds for the floor so it will light up the long tubes and going to light up the inside of my car lol can i put a touchscren radio in my car cuz i want to but i thing it will hit the molding piece around the gage cluster do u know if i can

dustins92camaro · 09-07-2009, 11:58 PM

so the weld x4 will work for the map lights and the festoons with work for the dome light and the NeoWedge will work for the gage cluster right im going to get the inside of my car lit up with some led strips to put on the floor and also can i put a touchscreen radio in it cuz i think it with hit the molding around the gage cluster do u know

Chevy8588 · 09-08-2009, 12:15 AM

a flip out SHOULD clear, but the shear length of the radio may be too long for the actual radio hole

dustins92camaro · 09-08-2009, 08:37 AM

yea they said u have to modify it and put there braket in do the have spacers u can put in so they wont hit it

mmm88TA · 09-08-2009, 12:13 PM

http://www.v-leds.com/Exterior-LED/C...-p4481039.html

these are the 194's I got for my trucks dash and it turned out great, I used superbrights in the past but there bulbs burnt out very quickly (within 5 months).I've had my V-leds installed for almost a year now. I'm planning on getting some red led's for my trans am's dash.

dustins92camaro · 09-08-2009, 06:05 PM

can i use the 44 mm or 42 mm festoon bulb in my stock dome holder thing

mmm88TA · 09-08-2009, 11:03 PM

http://www.sylvania.com/ConsumerProd...RG-Results.htm

here's a link that tells you what every bulb in your car is.

dustins92camaro · 09-08-2009, 11:05 PM

i wont let me view it there was an error it says

mmm88TA · 09-08-2009, 11:25 PM

Dome light
211-2

so per the superbright cross reference guide it looks like 211= 4410 (44mmx10)
I'm just going by what their site says so this may or may not be correct.

sylvania fittment guide
http://www.sylvania.com/ConsumerProd...de/default.htm

superbright cross-reference
http://www.superbrightleds.com/bulb_cross.htm

VLeds 211 bulbs
http://www.v-leds.com/211-LED/c122265-1-2/

84 1LE · 09-09-2009, 12:32 AM

The best one for the dome lense is the first two in the 211 link.Dont even bother with the smaller ones.You want at least 30+ LEDs to illuminate the int.