InteriorDiscussion about interior restoration, repairs, and modification.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Hey all. I looked around but could not find anything. Does anyone know where I could get a clear dome light cover for my 91 Camaro? Do they even exist? Thanks
Hey all. I looked around but could not find anything. Does anyone know where I could get a clear dome light cover for my 91 Camaro? Do they even exist?
Not that I know of, but I don't know everything (ask my wife). Should you be looking for more/brighter light, you might consider LED's. Check post #5 of the following link:
Yeah, there's no such thing as a clear factory domelight cover. I don't think you would want want one, the inside of the domelight isn't pretty and you definitely wouldn't want to show it off with a clear cover.
yea go LED, thats what i did a 14LED board should be perfect
__________________ "I'd Like To Help You Out, What Way Did You Come In"
"Emissions Control Is Being Able To Hold A Fart In"
"Somewhere, a village in Kenya is missing its idiot."
Check Out vBGarage For All My Cars And Mods Gulf Coast Third Gens Find Us On Facebook orJoin Us Here<Clicky
if by hyper blue do you mean blue as in a cops lights blue or the white that has a blueish tint, because white LEDs are naturaly that pure with with a blue tint, otherwise you can get blue LEDs too
Yeah I would like to do a cop like blue in the dome light. Though with the current cover it would look like crap. I'll look into that link a little harder!
your current one may of yellowed with age, a new one will be a frosted look, white lense
as for the LED there is a LED board that has a lead on it, it has a glass tube to go in the bulb socket, it has wires on it the go to a board that has X amount of LEDs, i recomend atleast 12, you can set that board with the LEDs glowing down directly on the cover and tape it in place with clear packing tape, that IMO will give you the best result you are looking for, they also make LED lights for your floor lights and map lights, get atleast 4 LED in the case of them
