Hi I was wondering if anyone would know how to remove the rear seats in a 90 camaro.

Bottoms have a little screw in the front under the cushion you have to take out. The backs are attached by a screw on a bracket on the outside of each seat and have a rod that slides on the center part. Its like a 13 mm nut or something on a stud through that bracket. Basically where the seat back meets the bottom, in the back sort of underneath there is the bracket and nut.

Awesome, thanx. Also found an article on Super Chevy that describes the same thing.



I found the torx (star) bolts on either side but wasn't sure how to get to them. I never thought to look under the bottom cushion.