InteriorDiscussion about interior modifications like dashboard swaps, seat replacements, or general interior repair.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
i have a 1985 Z28, just recently, the door locks quit working. when i push the button on the driver side, they still "click" but neither side responds. what is the most likely problem here? the switch itself, or a solenoid? any ideas? thanks, rick
This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!
Sponsored Links
Registered users do not see this ad. Click here to register for free!
i have a 1985 Z28, just recently, the door locks quit working. when i push the button on the driver side, they still "click" but neither side responds. what is the most likely problem here? the switch itself, or a solenoid?
The problem is common to our cars. Try a thorough cleaning with WD-40, then relube with white grease and you should be good to go. Since you'll be in the door panel anyway, you might consider some of the info in the following link:
