Third Gen Swap Meet!! - Page 2 - Mid-Atlantic Region - Third Generation F-Body Message Boards

ryan91rs · 01-09-2008, 12:34 PM

what mods are needed to get the subframe connectors to fit? and is the sub box the one that fits in the back? thanks!

4) competition eng. sub frame connectors weld in type. modification to floor needed for instal. $60 obo

5) sub box for 2 ten inch subs with oooooolllddd rockford fosgates in it. make offer.

raptor80dad · 01-10-2008, 05:05 PM

700r4 w/ 90,000 miles . Worked fine when removed to do swap . $75 obo

I am also loking for a junk rear to put under my car so I can push it in and out of garage .

thanks Mike

sharon · 01-13-2008, 06:51 PM

Motion Glass Notchback for sale. No glass, but has never been on a car. Asking $400 and for pick up only. I'm located in central PA, between Hazleton and Allentown.
Email for pics.

flippermtc · 01-14-2008, 07:52 AM

I am looking for a front lip spoiler for a 1988 IROC. No rips or tears. Please PM if you have something. Thanks.

89formula350b2l · 02-05-2008, 09:59 PM

Gauging interest if anybody would be interested in my 3" catback with 3"in dual 2.5" Magnaflow muffler. Will have pics soon. Make offer

Steve86TA · 02-10-2008, 05:54 PM

4th gen graphite cloth firebird seats $200.Pick up only

http://www.thirdgen.org/techboard/in...-graphite.html (4th gen Firebird graphite seats MD SOLD!!)

91-92 Z28 wheels with tires $150
http://www.thirdgen.org/techboard/ex...tml?highlight= (91-92 Z28 wheels $150 in MD)

primerk5 · 02-11-2008, 08:34 PM

Need TPI Intake parts for MAF setup for a camaro. I have the flex hoses just need the air box itself and the peice that attaches to the MAF sensor.

THIRDGEN87 · 02-11-2008, 10:19 PM

looking for red rear bumper cover for firebird. thank you

paterra · 02-12-2008, 09:29 PM

I am interested in the throttle body carb and intake for that. You are asking $30 for both plus shipping? What does shipping cost to zip code 93536 in Lancaster, California.

paterra · 02-12-2008, 09:37 PM

hello?

TTA 1387 · 02-13-2008, 08:31 AM

I have 2 sets of T-Tops I need to get rid of. I know one set was a large pin, might be both. Haven't pulled them out in years. I think one had a bag also. They were in decent condition. I don't remember having keys for either set.

$40 for all. Come and get them, no shipping. If I get a chance, I'll pull them out and snap some pics.

Have some misc TTA stuff also. Mainly tune up stuff and some stock parts. I'd have to check though. I know I have the stock injectors and stock D5 converter.

krisb410 · 02-18-2008, 06:15 PM

A buddy of mine at work needs an Z28/Iroc hood, he has the louvers already. If anybody has one, or knows where I can find one (junk yard). Let me know. He says if I get him a hood, he'll prep and paint my 82 SMC hood for free.

Steven89Iroc · 02-18-2008, 07:35 PM

krisb410,

I just ran across these on the DC Craigslist yesterday, hopefully they're what your friend needs.

http://washingtondc.craigslist.org/m...574779709.html

89formula350b2l · 02-19-2008, 09:08 PM

2 Dynomax Ultra Flow Mufflers in Stafford VA pm me

i have a set of stock runners, stock tpi base ported alittle, and a stock throttle body with a polished ws6 plate on top, 4.30 3.73 and 2 sets of 2.73 for sale and a ring gear spacer to use a 3 series gear on a 2 series carrier, i have a complete 4th gen 10 bolt with moser axles and the 4.30s in it, also have a 9 bolt posi rear with 3.45s gears but the pinion gear is missing some teeth, make an offer on any of this stuff i need to clean out garage

obnxousz28 · 02-21-2008, 06:26 PM

I am thinking of selling my 1987 Z28. It has 112k on the body and 40k on motor. new blue paint, 4th gen seats, all power options. The car looks, drives and runs great. I will get pics and complete discription up soon. make me an offer.

85MikeTPI · 02-21-2008, 07:10 PM

Rebuilt (Stock+) T56 ('94-'97) for sale:

This trans is to replace a broken T56, it's not complete for a Auto or T5 swap.
(Needs shifter, sensors, plate transfered from existing T56)

All the internal components were checked/tested and replaced if needed. It includes the upgraded steel 3/4 shift fork. Synchros were all replaced. A .002" preload was shimmed for performance/endurance driving/usage.

The trans is located in Elkton, MD (21921) and can be delivered up to 50mi from there.

$1000+core for the trans, or $1400 outright.

DCP_ 009.jpg

DCP_ 010.jpg

DCP_ 011.jpg

FIRECHICKEN · 03-02-2008, 07:42 PM

Hello everybody,

I still looking for some parts:

1 Kumho 245/50/16 with 50% or more tread. Prefer the 711 but let me know if you have anything.

Front bumper cover and 2 front fenders for a 92 T/A.

Black coupe carpet and door panels for 91-92

I still have some parts that GOTTA GO too!!

Fiberglass targa/notch style hatch back. Needs paint and a piece of glass. $175

Factory rear glass hatch in red w/defrost. $40

Factory base V6 hood in pretty good shape in red. $50

Stevo · 03-09-2008, 06:49 PM

Hey how you been raptor80dad? What are you building for the car now? Have you decided to part with the 12 bolt yet?

89305formula · 03-10-2008, 08:17 AM

i have a set of front and rear canuck motor sports lowering springs that i just replaced with a set or moroso trick springs and v6 springs, i paid 170$ for them last year ill sell them for 50$plus shipping, im also looking for a set of black door panels for power windows and locks, if anyone has a set and would like to trade let me know

BlueBeast · 03-14-2008, 08:12 AM

Hey raptor80dad does the motor come with all the wiring? I am asking for a guy at work that wants to do a swap so all info would be great.

85MikeTPI · 03-14-2008, 09:58 AM

I need a LT1-T56 bellhousing if anyone has or runs across one. I need the slave extension with the bellhousing also.

thanks
mike

arrowcamaro · 03-14-2008, 06:59 PM

no leads on a bell but you can get the slave adapter/bracket from GM parts direct P/N: 12523315

Its listed at $28

there was another place that had them (slave adapter) for $13 but I cant seem to locate where that was

EDIT: found it http://www.autogear.net/warnergearT56.htm

fordspanker · 03-17-2008, 07:39 PM

i have a 305Tbi 109k on it ran good, no smoke, best offer takesit. I'm tired of tripping over it. reply to fordspanker@msn.com

fordspanker · 03-29-2008, 06:13 PM

just cleaned my garage today, I've got some misc. black seat belts, a t-top bag, a tonue cover, a set of 4th gen door panels(grey leather) with switches, and a 4th gen rear seat back (gray leather it's all going to the dump if not claimed. I also have an 86 thats getting ready to be towed to the bone yard not much left to it but if you need something let me know.(the car has no drivetrain)

TTA 1387 · 03-30-2008, 08:29 PM

Quote:

Originally Posted by TTA 1387

I have 2 sets of T-Tops I need to get rid of. I know one set was a large pin, might be both. Haven't pulled them out in years. I think one had a bag also. They were in decent condition. I don't remember having keys for either set.

$40 for all. Come and get them, no shipping. If I get a chance, I'll pull them out and snap some pics.

Have some misc TTA stuff also. Mainly tune up stuff and some stock parts. I'd have to check though. I know I have the stock injectors and stock D5 converter.

The t-tops are FREE. Just come by and get them. Whoever wants them can have both sets. I just want them gone.

transamrob86 · 04-01-2008, 12:03 AM

Looking for a running 2.8 MPFI and 700r4 to go in my 86 bird. I live on the eastern shore of MD. Preferrably wanting something close.

89305formula · 04-02-2008, 11:25 AM

this isnt really 3rd gen related but i have to sell it to fund my 3rd gen
i have a 98 cherokee sport for sale 145k 4.0 motor runs good needs tires and a battery , something wrong witht the hood latch, only the secondary latch works, damage to the drivers side rear door and rocker panel, its green. has power everything, id say its in decent shape, looking for 1700$ obo

88tpi350 · 04-08-2008, 04:08 PM

HOLA!

i have out of a 88 firebird:
tpi set up w/9th injector (no harness or cpu)
pair of 083 heads ported (slightly) 1.60 /2.02 valves done by clear water heads in FL.
misc tpi stuff (all connectors engine side
cruise controll... worked perfect.
stock torqe arm