Mid-Atlantic RegionRegional board for all of the Mid-Atlantic states. Discuss gatherings and get togethers.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
I have a rear hatch, great glass, defrost, no wing. It is painted red. PM me if needed or interested. Looking to clear out some space. Originally came off an 88 Trans am.
latch style non locking mirrored/tinted t tops glass is perfect plastic has a tiny chip off it near the driver a pillar - 75$ picked up frederick, md
or trades ? for something interesting :P hit me up
__________________ 1977 T/A - sold
1985 Firebird - sold
1994 Camaro - sold
1978 Formula - 400 --> 463 beast winter buildup
1987 T/A - LB9 former dd project, make an offer
Last edited by Project: 85 2.8 bird; 12-04-2010 at 02:45 PM.
For sale:
Th400 built with all TCI internals.
Heavy duty clutches
Long tail shaft
TCI reverse pattern manual valve body
Deep pan
3200 B&M stall converter
2500 miles on it sence rebuild
$700.00 obo*****
Will throw in a B&M mega shifter (not third gen specific) for anouther $100.00
I have two crosslace wheels off an '89 GTA for sale. A front and a rear. Both are in excellent condition. They're not bent, they have no curb damage, nicks, scratches or peeling clear coat. Both have Falken 255/50/16 tires on them with decent tread left.
Front:
Rear:
I'd like $250 a piece for them, or $400 for the pair. Center caps and lug covers aren't included.
I also have another rear that has a fair bit of damage to the lip, but it still holds air. I'm not sure if it's repairable or not, but if anyone wants it, you can have it for $25.
That'd be awesome. How's your car running? If ya got time i'd like to come check that beast out since you got it up and running. Let me know if you need anything i have tons of parts.
we could trade some parts if you like you still got my number? im heading to the mall now but we can trade parts if you like, i have not been to my car in a few months and gotta find out why my batt is dieing im pretty sure i have a bad ground somwhere just got to find it feb 2nd or so im gettin my hood pins installed! and then just trying to get my r6 together
if you wana know anything more just txt me or call
T5/T56 Hydraulics with RAM adjustable master cylinder(175 new alone)
$225 Shipped
4 pt Bolt-In Rollbar
$200 No shipping
2 Dash Pads
$75 Each No shipping
Lots of misc fittings/hose
Make Offer
All parts have less then 1500 miles on them and are in good working order. Any questions just ask. Prefer local pickup...will make a good deal if you want a lot of stuff.
Located 22152, VA
Thanks.
fuel setup has is one line that goes from the sump all the way up the regulator then to the carb
15ft of -8 hose
2 ft of -6 hose
Carb Feed line with fuel pressure gauge
fittings:
2 90* -8
5 190* -8
1 45* -8
1 45* -6
1 90* -6
1/2 to -6
1/2 to -6
Also have an extra 2ft of -8 that was not used.
I'd love to sell this complete fuel setup. I ran it returnless with a Holley 750DP and had no fueling issues.
hey guys im looking for black door panels, headliner(backing board, i can recover if i need to) (91-92 Front bumper with chin spoiler, and passenger side lower door molding, color doesnt matter im about to get my car painted i just need tofind these before. i might be interested in the entire gfx off of any year, if price is right)
Stevo - Do you still have the fuel setup and the roll bar ?
very very interested in the fuel setup and kinda curious about the bar as well :P can email me at bflee87@gmail.com if you have a price in mind for the whole setup if you still have it. thanks bro
-Stock front A-arms with Global West del-a-lum bushings in them. I suspect that the passenger side is bent, so the only good in these are the bushings. They're $150 new for a set and only have about 6k miles on them. I don't know if they can be pressed out without destroying them though. $40.
-Stock spindles - The passenger side may be bent. I'm not sure though. these are free.
-Stock front brakes w/year old rotors, pads, calipers, and rubber lines. These have about 5k miles on them. Also free.
-TPI dual fans - motors, blades, and mounting brackets included. No hardware. No idea if these work or not. both are yours for $20.
complete TPI set up, $150 for TPI only and $225 with harness and computor. Set of 4 Gold GTA wheels typical clear coat problems and slight fading of gold & black on caps $300. 355 12:1 dome TRW pistons, steel crank, "O" rods, 291 double hump heads,screw in studs,push rod guides,stud gurddles, 1.5 aluminum roller rockers,milodon 7qt oil pan, Weiand 7564 intake which has been "swurl ported". $2000 obo. Also have 2 good undamaged Firebird dash pads $100 each. Please PM me for mor pic's or info. Or e-mail me at daprdave@live.com (best way to reach me) Also have 2 87 rear IROC wheels with one center cap $100 for the pair. Many other misc. Firebird parts and a few Camaro parts. If you are looking for anything feel free to ask me, If I dont have it, I may be able to find it
Last edited by 1brd2brd3brd4; 05-16-2010 at 01:17 PM.
For sale 350 Roller block $150 with crank, rods and used set of .030 pistons $350. Complete 350 engine (Advanced Auto reman. engine) Aprox. 30K miles with your choice of TBI or 4 Barrel intake $400. 327 Block and rotating assy. (1 busted piston,busted between 2nd ring and oil ring) $300. 462 Heads $200.
2 power buldge hoods, 1 Trans Am hood, 2 Duel fan set ups,and a partridge in a peartree
Last edited by 1brd2brd3brd4; 05-25-2010 at 10:59 PM.
i have a 1988 iroc z hood black with louvers. $80 obo. pickup only. send me a pm. possible trade for front nose with gfx or sway bar link arms.yes i will give you more money if needs be for the trade. also hatch struts
I have a tpi setup im taking off my car that i dont need cause im going to carb.
I have slp runners ported , edelbrock high flow base intake ported and with a egr block off plate, stock plenum ported to match the slp runner and stock trottlebody. I have stock fuel rail with 24lbs injectors and bbk FPR with a fuel gauge on the rail to show psi. Msd distributor for the tpi unit also the ram air box with kn airfilter. have slp bolts and arp bolts that goes with it. Plus the 350 heads that been ported to much intake and work done to them. the computer for the tpi unit that has been chipped.
$1000 obo.
i have SLP 1 3/4" shorty headers and y pipe that have a flange at the cats so a cut out can be made to fit, the cat is a magnaflow 3"inlet/outlet stainless universal cat and the muffles are hookerAero Chamber Mufflers. 3" to 2.5" after mufflers. all the pipes have been welded ready to be put on the car cause they was took off my 1991. 550 obo
willing to take parts to you if not far plus alittle gas money.
located in severn, md
Last edited by 1991TransAm; 06-13-2010 at 06:33 PM.
Firebird passenger side feder -$30
Firebird driver's side fender -$30
Firebird hood (Flat, plain hood) -$40
All parts are green in color and came from a 1991 base firebird without ground effects. Fenders do not have ground effects mounting holes. There are a couple dings here and some surface rust from sitting, but nothing through, no pitting.
Will not ship these. Local pickup in the Dallas / Ft. Worth area preferred.
LONG TAIL SHAFT TCI TH400 WITH MANUAL VALVE BODY AND 3000 STALL CONVERTER -2000 miles on trans sence rebuilt
-ferm shift
-$400.oo OBO. Need it gone!
PM me if interested!!!
mo
