Let's give it a try for a while, and see how it goes. If U have Thirdgen parts or thirdgen performance parts to get rid of locally, list them here in this thread. Even though there is a classified forum on the TGO board, let's give this a try. Thread guidelines: 1. Make one post--AND ONE POST ONLY-- listing whatever U have to get rid of--Thirdgen parts only! 2.Post a PRICE and LOCATION to make it easier for all of us. 3. Keep your post/list of parts to get rid of, current and up to date. When U need to add or remove something to your list, use the edit feature. 4. Please take it to "PM's or emails" when U start talking about money 5. Any other "thread guidelines" will be posted if and when the need arises! If this idea/thread does not work out or little or no activity or is misused--the entire thread will be deleted!!! 6. Universal fit parts and /or items such as tools are OK to list! 7. Complete cars for sale may be listed here. 8. Parts wanted/needed may be listed here also. 9. I will be "pruning" the dead posts out of the thread when appropiate! So if U got Thirdgen parts or Thirdgen performance parts to get rid of Post them!!

SELLING
Soft seal weather stripping roof rails for hard top, NEW in package


"82-92 CHEVY CAMARO, PONTIAC FIREBIRD, 2DR CPE ROOFRAIL W/STRIP THIRD GENERATION F-BODY " part # 3101 $89.00 from soft seals site.

http://www.soffseal.com/searchbypart.asp and just type in 3101. you will see exactly what it is.

location: 20902 md or 20854
price : as close to 89.00 I can get. or trades.

want to buy
power mirror switch non yellow version
black 82-83 still plates
98-02 full seatbelts black/ebony
fog light switch that lights up
non modly black back seat bottoms and slip rear if you have.

-------------------------ENGINE DRIVETRAIN-------------------------------

USED> Fuel Rail. 86 fuel rail with 9th injector. No pressure regulator. Rails are in great condition tubes are OK. $40 plus shipping.

USED> Stock GM lower TPI base and runners for 87 and up without 9th injector hole. Mildly ported. Base is red and runners are unpolished aluminum. $90 for both.

NEW> One oil pump pickup screen for small block chevy with a stock oil pan. Slip on style. $5

USED> One K&N Filtercharger. Came from a TBI camaro. I believe it is part number #E-1450. Measures roughly 12" round and 2 1/2" thick. Looks brand new, oiled and ready to go. $25 shipped. Check fitment first. Should fit any round camaro stock air cleaner from 1976-1992

USED> One K&N Filter charger for a Camaro or Firebird with any engine built from 98-2002. It is in great shape with no problems , oiled and ready to go. $38 shipped. Part number 33-2118 Retails for $58

USED> Stock steel driveshaft from 700R4 car. May need rebalancing and possibly u-joints. Otherwise looks good with not dents. $25

NEW> Holley Throttle body lever arm for older 86-89 throttle bodies. Zinc coated. $25 shipped

NEW> Holley Stealth Ram fuel crossover tube. Never used excellent shape. $20 shipped

USED> Stock Borg Warner 9 bolt 7.75 inch rear axles. Bearings might need replacing. Axles are straight. $150

----------------------------EXTERIOR--------------------------------------

USED>Two right side Trans Am rocker panel ground effects in pretty good shape. Not ripped or cracked. $30 each.

USED> Polished Trans Am Taillights. Shved DOT numbers. Look pretty good not flawless... $85
-------------------------------INTERIOR-----------------------------------
USED> 2 Front black firebird seats. In good condition except for two small one inch cuts in the bottom of the passangers side seat. Not even noticeable. Pick up only on this one. $75 for both.

USED> Three radio wiring adapter harnesses, Used but plenty of wire. Small pins style (newer). $5 each

USED> B&M console Megashifter boot and plate. Plate has built in gear indicator and the rubber boot is in pretty good shape. $25

USED> Stock automatic shifter boot. Good condition not torn $10 shipped

Please let me know if there is something you like here. I will be listing some of them on Ebay eventually. I can deal on multiple items and accept some trades. It doesn't hurt to ask about anything so let me know.
Thanx, Remember First come First serve and shipping is extra unless listed. Shipping from Maryland 21015 I can send pics if you are seriously interested.

.

i have a 58mm bbk throttle body with an iac motor and a tps sensor 150$

Whats goin on guys? I gotta couple things to get outta my house.
passenger side door sill great shape
driver and passenger side door top rail with sweep
red kick panels with carpet pretty decent shape
rear window louver without hardware. great shape

let me know if your interested and what your lookin to spend

I have more stuff than I can type. I attached a Word doc with my entire inventory. Keep in mind that it's mostly a note to myself, so if my shorthand doesn't make sense, please ask. Unless other wise noted, prices are B.O.

Mainly, I am trying to sell my 10 bolt/drum brakes/3.73 Richmond gear set/posi. It comes with the e-brake cables still attached, drum shoes are still good and recently rebuilt Oct 06. Swapped it out for a 12-bolt, I'd like $300 for this unit.

Also, I have 2 TPI units; one from 87+, one from 86 prior. The 86's metal fuel lines are useless, fuel rail is still good. $175

Tons of stuff, PM me if interested.

Eric/Richmond VA

Xbox07-

Pics of the shifter and shifter ball. The ball is weighted, fairly heavy but gave the stock shifter a better feel. The shifter has no threads left, but the ball never had any anyway. It's a nice tight fit, I think I had epoxied it to the lever when it was in service.

1. have a 700R4 out of a 91z28. Shifts fine, but has some sort of 1 way bearing issue. When down shifting the motor RPM's do not go up. (like a bicycle freewheel) Have used it in car for the last 3 years. Just got deal on a rebuilt. Will get you buy if you want, or rebuild..! $50

2. Also have a torque converter less than 10K. Stock stall, perfect condition. $50

(Trans and TC for $75 !?)

3. I have a TPI base from a 91z. Only issue is the T-stat bolt snapped, but i had a new manifold so didnt bother with it. $50

4. Rear!! 4th gen 97z 7.5'' 10 bolt, welded tubes, welded lower control arms, mosier axles, no diff, was on 3rd gen. 200 obo.

would entertain trades?

Oh yea, I am in southern Md!!!!! shipping on base only!!!

-T

Pm!!

for sale i have:

8 accel 30lbs/hour injectors new in box. $150

holley steath ram manifold with arizona speed& marine 58mm throttle body. ruel rail and 24lbs injectors for $450!!!
1 1988 corvette distributor (coil on top) $60

2 1991 camaro distributors $40 each

1 1991 camaro summit billet distributor 2 months old $80

stock tpi silver centerbolt valve covers $20

tpi intake (airbox, K&N filters, rubber tube, and the lid thing infront of the radiator) for mass airflow. $60

1le a/c delete box with blower motor $80

edelbrock 14' aircleaner & filter $10

2 drag style 5 star wheels i belive they are 15x6 $90

tubular lower control arms non adjustable $100 (pending)

t-5 tranny from v6 camaro (will work on v8) $100

corvette magnesium valve covers (missing corvette symbol on one side)
$20

feeler=1991 red camaro hood wtih blisters. how much is this worth?

here is some of the things i would be intrested in a trade. i have a caburated 355 that im trying to get more power out of maby long tube headers (if they clear) or better carb, or steering rack conversion or tubular k member, or coilover conversion or anything along thoes lines.


PM me and ill take photos of whatever it is you want, i also have alot of other things i just cant remember them all right now. some of the things are in storage but if interested i will brign them out and take pics! buy my stuff so i can drift! thank you very much!

Wanted:
Rear interior plastic pieces, color gray, to replace my original carpeted ones (1987 Camaro). Looking for pieces in excellent condition without holes for rear shade. Located in MD.

Thanks.

Selling a set of 17X8.5" ROH wheels. These wheels have never seen the street as my friend got them earlier in the year to use for autocross rain tires on our '82 Camaro, and of course since we had rain tires, it never rained. We never even had a chance to put them on the car!



Asking $450 OBO.

I also have a set of OEM injectors (19 lb) from my old 305 TPI Firebird. No issues with the injectors, just swapped in 22-lb injectors for the 350 swap. $50 OBO.

I'm located in Maryland near BWI airport and would prefer local pickup at least for the wheels.


Pat

anyone got a windshield motor for a 87 z28?

For Sale:

Misc. 85-90 Trans Am Ground effect pieces left over from a GTA build. Make offer and will separate.

Looking for: 82-92 Grey and Black 2-tone Trans Am seats in very good condition.

Various parts for sale/trade

Here's what's for sale:

Stock shifter from '91 GTA w/ leather shift knob, removed because I went with a Megashifter... have shift boot, just need to find it.. $30 with boot, $20 without

Stock air box from '91 GTA w/ intake ducting, canister painted red, ducting paitned grey... $20

Grey sunvisors w/ mirrors, good upholstery, could use a cleaning, from '91 GTA... $15

Stock front and rear WS6 springs, from '91 GTA... $30

Lower door sill trim piece, grey... $5

Rear hatch interior piece, the very back piece that covers the hatch pull down, has cut-out for cargo light... $10

Remote hatch release cable and activating solenoid, $5... in the process of cleaning the garage, I know it's in there, I just have to find it... workbench is a mess

Grey interior piece, drivers side, the piece next to the rear seat and under the piece that the speaker sits in, not sure what its called, good condition... $5

Dash pad speaker inserts, black... $5

Edelbrock TES shorty headers, w/AIR tubes and black temp paint... only for trade, for non-emissions headers of equal quality... not selling, need them for the car in about a month or so... will use them if nobody trades

WILL TRADE ANY OF THE ABOVE PARTS (excluding headers) FOR THE FOLLOWING:

91-92 GFX, front piece between wheel well and front nose, preferably red, need both drivers and passengers, pass. side door gfx, also red

PM me for pics

Looking for some Hooker headers ( long tubes super comps) local-ish to 20902

does any body have a dark green 92 firebird door pw pl also lookin for 2 245 50 16 inch tires for the rear have some tread left on them

Ok, i am turning my 1992 RS camaro into a drag car so alot of it is for sale.
1. 305 tbi v8. <make offer. IDK maybe $250.oo? computer and all. throttle body to oil pan.
2. 700r4 auto trans, shifts great and has all the gears. Will perform trans flush befor trans is sold. <make offer or maybe $300.00
3. Stock torque arm 10-bolt rear (28spline) <make offer or mabey $150.00
4. th350 core trans<$100.00
5. 4500 stall converter for th350 or th400<$200.00
6. th400 core<$200.00

Car is still complete, come drive it if youd like. Getting ready to swap a 383,t-56, ford 9-inch with 4.30 gears.
PM if intrested or E-Mail me at kmo1188@hotmail.com
Have other performance stuff too.

need to buy a intake manifold base plate 305 tpi no stripped or snapped bolts please i need it asap this week thank you

Stock LS1 aluminum driveshaft $100 sold!

Stock TPI intake base/plenum/runners. base painted aluminum, runners/plenum polished. fuel rails and adj. regulator included $150

Front GTA springs $20

Stock K member come get it out of my yard

Everything is in Upper Marlboro/ Lothian area

Ive got a set of clean black 84 berlinetta front and rear bumpers, tail lights, very *custom* double cowled hood and a country boy designed lexan hatch id like to get rid of.

Looking for z28 or iroc front & rear bumpers and ground effects all the way around. Also a stock factory hatch and 4" cowl hood.

i am interested in your front bumper !!!!!

Parting out 89 Formula 305. Auto, 114,000k, black interior,16 inch formula wheels,Power buldge hood straight body. WS6 suspention, non-possi rear/drum brake (I also have a slightly wider disc brake possi rear for sale/pbr calipers).

Parting out 92 firebird. V8 car. not know what engine, its not the original its an older engine.It is supposed 350,I think it maybe due to the fact that it sounds like its knocking. I think some one put a 305 exturnaly balanced flywheel in an inturnaly balanced 350 (sorry WCt-5 already sold).Black interior in really good shape. Good hatch motor.Good body panels, it is a ground effects car and they seem to be in good shape tho the pasenger side is in question(wont know til I get it off).

2 rear IROC wheels(no centercaps)

full Gound effects off 86 T/A

front and rear bumper covers, spoiler off 87 IROC

2 perfect dash pads for firebirds and one in good shape(one small 1 to 1 1/2 crack in a not so obvious location)

700R4 out of 87 RS aprox. 135,000 miles

many sets of T-Tops, many different firebird map pouches
Just ask. I may have it PM me with any questions
I am in Virginia


Thanks,
David A. Parrish

Just a note, I think this is possibly the newer 91 1/2-92 hatch motor as it looks different. I'll check into it for you when I get back if you want.

XR276HR for sale

Selling my old cam. http://www.compperformancegroupstore...&Category_Code= There are the specs. 224/230 .503/.510 on 1.5 rockers.

Made good power in my 355 and decent power in my 385. Just upgrading to a larger cam.
Many have been in the mid to low 12's in a 355 with this cam.
$180 or if you want,

Pics coming soon

WTB: Shortblock SBC 350-400 or anywhere in between thanks
-brad

I have:
86 TPI manifold with waterneck
IROC cluster with 145 speedo (trip odo doesnt work) showing around 97k miles (no temp gauge)
TPI distributor cover
A bunch of random distributors (let me know if you need any parts or anything, you can have them if you wanna come get them)
Stock A/C compressor
Im not looking to make a killing on these parts, just some reasonable offers to get them out of my house. Thanks guys.

is the 145 speedo cluster compatible with the older mph/kph dual needle speedo setup or would i need to get a new harness and rewire it (have an aftermarket coolant/trans temp gauges ) and do you have a stocker distributor or bolt on replacement layin around ? pm me a price im in frederick

Picked these up at the boneyards today, not sure if anyone can use them or not:

--dashpad is gone--

IROC Hood Louvers:
They are intact, no cracks. I did not clean them with anything but soap and water, so I suspect they will clean up pretty nicely. There is one broken stud on the back, the top of the passenger side.
Front of Louvers
Back of Louvers
$65 or best offer

If you want better pics, send me a PM and please be specific about what you want to see.

I really don't want to ship this stuff. I'm near Easton, and I drive to Annapolis 4 days per week. I will go as far west as Bowie to meet someone for handoff.

Also, I'd be interesting in trading. Some items I am looking for:
36mm Front Sway Bar
WonderBar
T-Top headliner in good shape. Don't care about the covering, interested in the backing

Send me a PM, make me an offer.


Edit -
Forgot to mention. Saw some odd stuff today at the yards. 83 Z28 with Crossfire, looked to be intacked. The hood and nose was gone. Thats the second one I've seen in a month, can't remember the last time I saw one. They also had a 95 Z28 with LT1 and a disc rear. Same yard had an IROC 5.0 TPI 5 speed, looked intacked but alot of front damage (thats where the louvers came from). Finally, an 84 Firebird SE; never seen one before, even back in the day.

Flowmaster cat-back exhaust system- used but looks new. chrome tips and awsome sound. Must get rid of it because i cannot use it with my sumped fuel tank im installing. $200.00obo. Im unsure how much it is worth so just make me an offer, i just need to get rid of it.

parts i have for sale
*2.5 sets of ttops, glass mirrored, 1 set comes with leather ttop bag. will not ship
*LT1 intake manifold brand new, used for a mock up and never completed
*tpi setup- plenum, throttlebody, fuelrails, manifold, runners, no bolts, custom heat painted black and red also comes with full set of new gaskets.
*center consel from radio to rear ashtray no glove box cover mint condition ..
* black and gray camaro front seats. no rips little sun fading 94% mint no brackets will not ship!
*** 87 firebird with trans am front bodykit.. great for parts complete car have clear tittle v8 ttop auto must go!!

parts are located in winchester virginia 22602 please feel free to pm me if u are interested in anything.. i do not mind shipping but buyer is resposible for fees. i will also meet u with in a 20 mile radius for a fee. all prices are best offer

Hey,

I need a t-top headliner for my 89 RS Camaro. Mine is in really bad shape so im looking for something solid and not ripped. Something cheap would be nice too.

I am SELLING:

Entire Grey Interior Panels. $50
2 Split back seats (mild condition) $15 (pair)

Located in Columbus...will ship if buyer pays shipping costs

can you pm me pics or email them to klipmotorsports@yahoo.com of the interior panels ? thanks! -brad

I am looking for an engine wiring harness for 84 Z28. Engine is the L69. please email me at leeshearer@verizon.net
Thanks
Lee

Dash pad speaker inserts, black... $5

Bring them on, send info need to buy

fourthgen 3.42 posi rear from 1995 Z28 in great working order, complete caliper to caliper with brake cables/sway bar/etc as pictured.

$225 (pickup available in SE Baltimore County or can meet within a reasonable distance)

GTA rims: http://www.thirdgen.org/techboard/ex...ml#post4249369 (1991 GTA rims.)

Stock aluminum ds: http://www.thirdgen.org/techboard/en...riveshaft.html

GTA Rims, '88 Gold with dimples.

Complete with center caps and original lug nuts w/plastic caps. $400 plus shipping. Prefer local pickup.

Also have other GTA stuff. PM me with needs

Just wrecked my Firebird....looking for a rolling chassis to transfer engine and trans into

Couple things for sale
1992 s10 plastic bed liner $100.00
1992 fiberglass bed cover $250.00
weld pro stars that came off a 3rd gen so there the right bolt pattern and backspacing in great condition. 15x8 with a 4 3.4 bolt pattern, 4 1/2 back spacing. $250.00
I have pics of everything.

For Sale: If interested, send me a PM and I will send pics for you. Prices negotiable.

- 91-92 GFX. Complete minus front chin spoiler in very good condition.

- 1987 L98 Engine (350 TPI) and 700R4 auto. < 90k miles and extremely well maintained. 55-60 psi oil pressure. All accessories (Including AC), powder coated front drive with POR 15 painted bolt heads. MSD ignition components. Original computer and most electronic sensors. Great engine and transmission.

- 5 speed shifter plate, would need new 5 spd logo

- Front spindles - great for brake upgrade

- TPI air intake set-up with < 5k mile K&N filters

- Wonderbar brace

- Stock y pipe for engine above.

- Also have the stock cruise control set-up

How much for 350 w/accesories and y-pipe ? can email or pm

KlipMotorsports@yahoo.com

I will pick it up if i purchase it.

1987 rubber fuel lines (2x)
1987 iroc camaro springs

1987 center bolt vavle covers
1987 ac compressor( v belts)

1987 iroc camaro driver power seat track
1987 camro plastic seat track covers
82-92 camro/firebird coolant/washer over flow tank
1987 tpi ducting pannle
1987 tpi ducting
82-92 under dash panels
1987 iroc lower controle arms (stock)
1987 torque arm ( stock)
1987 iroc pannhard bar
1987 iroc camaro hood (black but will most likly need paint , no dents!)
iroc camaro billet grill ( loooks killer just decied i want to go all black ) never installed!
1988 firebird hatch pulldown motor
UMI strut tower brace ( not broken just can't use it anymore due to new intake that sits higher than stock)
hawks , repo iroc oil cooler lines( not the stock steel ones that rust out, these are aluminum ones that dont rust out)

Shipping : dont want to
Location : 20902 silver spring / 20854 potomac MD

Trades : If you have somthing to trade let me know , I am willing to do trades

Prices to sell! ( no stupid low balls though , I would like to sell, but I DO NOT HAVE TO)

Contact : fastcarmo@hotmail.com, or pm me, instant message @ toxik iroc

Pics: http://s193.photobucket.com/albums/z...kiroc/forsale/ PICS! PIC!

wheel spats and spoiler from z20 trim code 88 firebird like bandit car but for 3rd gen for sale taking best offer will trade for parts zip code 16650 e-mail rutters27@yahoo.com

Anyone interested in fiberglass Ram Air II WS6 hood with hinges and hood latch? Great shape. Ram Air ducts open w/ nice screens installed. PM if interested, trades welcome.

looking for the metal bracket plates that bolt the chin spoiler and front nose cover to the fenders

plz pm

have Cfi functional ram air hood and CFI setup looking to get rid of or trade for carb/cowl hood setup

also have iroc 16s (alum w/charcoal/black accents) would like to trade for Z28 15s (5 spoke alum color)

bflee87@gmail.com or pm here

Have lots of interior odds and ends as well as a 7.5inch touchscreen dvd player, email if you're looking for anything

Trades welcomed

have an all aluminum stock replacement silla radiator for sale, i polished the side tanks, and had the stamped filler neck replaced with a billet one. 100$ obo

---SOLD---
---SOLD---
---SOLD---

Wheel Dollies!
These things are perfect if you have a car sitting in your garage, awaiting money/restore/whatever. I had no problem pushing my Camaro from one side of the garage to the other. My car will be moving under it's own power very soon, and I have no need for these anymore.

$70/best offer, or trade for a wonder bar or something I need. These things are perfect shape. 14 inches across. It's dust you see on them, wiped the top one off. The red is not primer or paint, but brick dust. Wipes right off.

I'm in Caroline County, but travel to Annapolis almost every day. Make me an offer.

---SOLD---
---SOLD---
---SOLD---

Aluminum "American Racing" Rims, 15 X 7. Set of 4. Currently has 245 60R 15 "Mastercraft" tires with great tread. Tires are probably 7 or 8 years old, FWIW.

"Spinner" center caps in first pic are gone, too much rust. I still have the caps that the rims came with when new, that have never been used - chrome, perfect condition.

Hows $175 OBO sound? It's a different look, they turn heads, that's for sure. Not perfect, few blemishes here and there. Look perfect from 5 feet!

I can send close ups of each rim, if interested.

am also looking for a black rear hatch w/good glass/defrost/no leaks!

have a i believe 84+ (multi wire not socket plug in) Tail light wiring harness (interior quarter back to rear including all lights {tags etc})

asking 30$ picked up

the iroc wheels mentioned above have great tread but i really just dont like the look, would trade for rs wheels also with comparable tread or aftermarket w/e