I am now parting out my 95 Z28, it was really shaping up to be a nice car but I have lose some toys and make room for a minivan. It is bright red with graphite leather trans am seats that are in nearly perfect condition. I also have installed (not pictured) matching camaro graphite leather door panels. Interior is very nice with no damage, cracks, etc. It has camaro SS ZR1 wheels on it with 275/40/17 BFG comp t/a tires. Rear is a 3.42 posi disc, and has a trans am muffler and tips installed. Other options include power windows/locks/hatch/remote/bose tape/etc, it's a well loaded Z28. It has taken a light hit in the front driver corner (pics attached) and I have a replacement oem hood/fender/bumper cover/header panel with lamps/etc. I am planning on keeping the LT1/M6/dash setup to swap into my thirdgen. Everything else is available! The roller will eventually be available, it does have a clear VA title.

how much do you want for the seats and are there any tears in them or burn holes, and are you keeping the center console for your swap

That's a beautiful car, why part it?

how much for the exhaust and what kind is it

$500 for the complete leather seat setup. Again, there are NO holes/damage/rips/wear/etc on them. The lumbar inflators work great and they come with all the wiring/hose to get them working. All they need is 12v and ground.

Not sure on the console just yet, I have to check and see if I have a spare or if I will need this one.

I also have a set that is from a 99 firebird, cloth in dark gray with only what looks like a small cigarette burn under where your left knee would sit. $200 for those.

I actually wanted to sell it as a whole, but was getting low balled to death. I have everything to fix it, but the time.

I think the motor in my thirdgen is on the way out, so it seemed like a logical swap to me.

Stock Trans Am catback in good shape. $85 complete if you can pick it up!

I also will have parts coming off my car for the swap, here's a couple I can think of off the top of my head:

(I will add more as I think of them/they come off the car)


Spohn torque arm/transmission crossmember
accell 24lb fuel injectors
standard TPI system
tpi ecm tuned by pcms for less
145 cluster

Hey Erik, i will pass on those seats. She wants ebony. I say beggers can't be choosers.

No sweat man. They are fairly dark though.

How much did you want for the torque arm/injectors? I see you have a T5, it'll work with 700R4 right? Does it have any safety loops attatched?

Hey there, the tq arm does not have a loop, and will work with the t5 or 700r4. New they are $370+shipping, so how's $230?

http://www.spohn.net/shop/1982-1992-...nsmission.html

The injectors new are $282, so how's $180? They probably have around 30k miles or less on them. They are a direct stock replacment.

http://store.summitracing.com/partde...5&autoview=sku

I could do both for $400, lemme know, thx!

PM sent

Spohn torque arm SOLD
zr1 wheels SOLD - I do have three more singles however