I've got threads in all the for sale forums, but in case anyone missed them... I'm currently located in Sioux Falls, SD and I'm cleaning out my garage. I've got one week till this stuff goes in the garbage or a moving truck. I don't have time to wait for mailed payments, I'm looking for local sales to put this stuff in the hands of people who can use it. Prices are cut substantially, and I'm not offering shipping on any of these parts at these prices. If you need something listed here and you can't drive here to get it, refer to my listings on the classifieds forums. DUMPSTER BOUND!!! Interior A-pillar trim, hardtop style & ttop styles available. $20/each B-pillar trim, hardtop & ttops styles available. $20/each Plastic interior panels from various years... I've got probably 2-3 nearly complete sets of gray, one nearly complete set in black, and a bunch of pieces in brown (NOT TAN!). $150/set, $25-up for individual panels 82-8? Brown vinyl door panels. Came from crank window Camaro. Nice condition overall. $25/pair Brown carpet, front and rear, nice used condition. $25/all 84-92 Seatbelts, some gray, some black. Typical used condition, also some sets for parts. Good used receivers. Various years! Email with needs. Prices start at $25/per piece, up to $150/very nice set. Firebird two-tone cloth seats, black with gray inserts. Rough condition, faded $25 85-92 Firebird lower console. Gray vinyl. Used, but servicable. $25 82-92 Camaro lower console. Black plastic. Used. $25 85-89 Firebird dash panel. Frame only, no guages, no pad, etc. Black plastic. $25 82-92 under dash panels, email with needs, various available. $15/ea Exterior 82-92 side window glass. Several available, in used condition. $25/ea 85-up Camaro / Firebird drivers side glass Ttop. Locking, pin, style top. OEM not C&C. Mirrored interior finish. Will fit any 85-up thirdgen, some cars might require weatherstripping change. $40 82-8? Camaro trim rings & centercaps for 14" steel rally wheels. 2 rings, 4 caps. $25/all 82-92 Camaro / Firebird gas door assemblies. Door/hinge assembly with bezel. Gray or Red available. $15/ea Wiper arms $10/ea 85-90 Firebird, Formula, front bumper/fender extension filler panels, without aero pkg! $25/pair 82-92 Camaro / Firebird cowl vent grill / screen / wiper trim panel. $25 Drivetrain V6 -------------- 2.8 MPFI fuel rail. Cleaned and polished, disassembled, no regulator cap, used fuel pressure regulator diaphram included. $10 2bbl carb, non-computer controlled. Came off an S10 or similar, identical to Camaro/Firebird 82-84 carb but without ECM control. $20 Clutch set, flywheel, pressure plate, disc, and throwout bearing. Flywheel was turned and disc was installed, engine blew up a few weeks later. Disc is a solid hub racing disc, everything else is typical OEM. Stock feel with racing performance. This clutch will hold as much power as a 2.8/3.1/3.4 can create! $75 T5, bellhousing, shifter, clutch fork, etc. Non-WC, Worked excellent when pulled. Ready to install. $150 Buy the tranny and I'll throw in the clutch set free. I have everything needed for an accurate 5spd swap in a V6 Camaro available. Intake ducting, 3.1L. Rubber bellows from TB to airbox, airfilter canister, PVC tube, etc. $15 82-84 2.8 Mechanical fuel pump. Like new, used for maybe 1,000 miles. $10 82-92 V6 700R4 core, with torque converter... FREE! V6 700R4 inspection cover, $15 V8 ------------- 82-84 T/A 4bbl aircleaner, functional style. Less then perfect, missing parts. Base assembly + lid with round hole and rubber bellows. See pic! $20 86 LG4 ECM & Prom. May apply to other applications. $10 86 Firebird LG4/auto engine wiring harness. Donor car had the A/C and smog removed, wires were left hanging, some melted plugs and wires. $10 85-87 Firebird TPI intake ducting. Filter cans, plastic ducts, MAF elbows, rubber TB bellows, etc. $25/all 82-8? Clutch fans $20/ea 82-92 700R4 parts/cores. I've got 5 700R4 cores laying around with various problems. $offers? 82-92 Low output exhaust manifolds, from 91 Formula. No air tubes! $40 82-92 Low output Y-pipe for single cat, no cat, no air tube, $40 Combine LO Y-pipe with matching LO manifolds above and I'll throw in a gutted EFE riser and reduce the price to $60 for everything. 82-92 OEM front crossmembers, with V8 mounts, A-arms, brackets, etc. $20/ea 82-92 Smog equipment. I've got check valves, manifold AIR injection pipes, diverter valves, pumps, etc. All used take offs. $offer 4th gen Various radiator shround plastic pieces. $10 cowl trim/wiper trim. $10 Misc parts/pieces Horns $10/pair Camaro rear license plate holders, fold down variety $10 Accellerator pedals $10/ea Brake pedal assemblies $10/ea Various steel brackets, braces, Steering column supports, etc $10/ea Accellerator cable, carbed $10 TV cables, various applications. $20 MC to Proportioning valve hardlines, $10 As long as I'm listing, here are other parts I have available that I don't mind moving... Interior Firebird, Trans Am, Etc Map pockets, various. $20/each GTA style cloth seats, gray. Very nice condition, no seat belt guide holes, perfect for CONVERTABLE. Need cleaned. Fronts only! $200 82-8? Firebird door panel pocket, black vinyl. $15 85-89 Firebird 3-spoke steering wheels, leather wrapped. I've got one in well used condition, needs refinished. Another has had the leather removed. Both need some work. $35/each $60/pair 85-up Firebird T-handle shifter knobs, gray leather wrapped. Minor blems, but servicable. $25 each 85-up Firebird E-brake handles, gray leather wrapped. Minor blems, but servicable. $25 each Bonneville SSE steering wheel, leather wrapped, airbag not included. Similar to 90-up Firebird, but different style airbag. $50 86 Firebird dash wiring harness. Uncut. $45 86 Firebird power window harness, uncut. $45 82-92 Camaro radio trim plates, various styles available. $25/each 85-92 Firebird console/shifter trim plate. Brand new old stock, in GM box. 90-92 style with gear indicator, also fits 85-89. No holes cut, been out of box a few times but never installed. Includes shift indicator, ashtray, shifter boot, etc. $100 82-92 Camaro console armrest pad. Black vinyl. Used. $50 82-89 Camaro instrument panel, from V6 car, 85mph dual needle speedometer, tachometer and full guages. Would work in V8 car with Tach change, I have V8 tachs!!! $70 82-89 Camaro Instruments, tachs, oil pressure guages, temp guages, etc. Email with needs/offers! $offer 82-89 Camaro IP trim. $10 or free with the purchase of a cluster. 87-92 Firebird 120mph speedometer w/pcb. $40 85-89 Firebird dash parts. Switch panels, cover plates, lower dash trim plates, etc. Email with needs! $offer 82-8? steering columns. I've got a couple laying around, automatic & 5spd. email with needs! $offer 82-92 Camaro 5spd shifter plate, shift pattern worn, leather boot. $50 82-92 Camaro/Firebird misc trim. Seat belt guides, seat track covers, ashtrays, etc. 86-91.5 Camaro/Firebird hatch pulldown units, used. $50/each 90-92 Firebird cupholder screw covers, black & gray. $5/each Exterior 85-92 Z28 / IrocZ / RS grid style tail lights. Nice condition, some small blems from blackout covers. No cracks. All plastic retainer nuts included! $70 86-92 Trans Am / GTA Crosslace 16x8" wheels. Fair condition, some minor damage to one wheel near centercap area. Need refinished/polished. 4 good used tires! $350 85-92 Trans Am / GTA hood. No crash damage, some minor wrinkles from previous owner beating on the latch. Needs refinish. $100 82-92 Camaro 3pc Spoilers. $best offer 82-92 Firebird rear 1/4 marker lights, with frames. $25/pair $12/ea 91-92 Formula / Trans Am / GTA hatch with wrap around wing, 3rd brake light, rear window defrost. $250 82-86 Firebird headlight assembly, passengers side. $50 82-86 Firebird headlight motors, $50/ea $75/pair Firebird headlight wiring harness, uncut, removed from 1986 Firebird. $100 82-92 Camaro taillight wiring harness, uncut, removed from 89 IrocZ. $50 85-90 Trans Am Taillight wiring harness, uncut. $55 82-92 Firebird centercaps. Several styles available, black with 'Pontiac' logos, black with various color birds, silver with WS6 logos, etc. $10 each discounts available when purchasing multiples. Drivetrain V6 Fiero aluminum valve covers... No gaskets, no hardware, need to be cleaned up and refinished. Most of the factory red powdercoat/paint is gone, ideal for polishing or custom finish. $50 Fiero intake bolt set... Full set of 12 point chrome intake plenum bolts from a Fiero 2.8. Will also work on MPFI Camaro/Firebird 2.8/3.1. Nice appearance upgrade for the V6! $15 Combine the valve covers and chrome bolts for a snazzy V6, $60 V8 82-92 L69 dual snorkle aircleaner. Not perfect, but very nice. Drivers side scoop is cracked, new OEM GM ducts, etc. See pic! $250 non-negotiable. 82-92 700R4 seal/gasket set. New in box aftermarket set with every seal and gasket in a 700R4. $50 B&M 700R4 parts. Valve body, friction materials, lockup solenoid, corvette style servo, aux valve body, rebuilt 10-vane pump, etc. This is whats left after a pump failed in a $1,600 B&M transmission and the local transmission shop didn't do what they were paid to do. Virtually every part needed to assemble a B&M 700R4. $250 B&M 700R4 torque converter. Slightly higher then stock stall. Lightly used. $150 700R4 inspection covers. Used. $20/ea Weiand 8004 Action+ 4bbl aluminum intake manifold. $75 Holley 600cfm 4bbl carb, 4160 series, electric choke, vaccuum secondaries. $75 Aftermarket Generic SBC Long tube headers. 3" collectors. Used. Came off a mid-80's Cutlass... $100 82-92 High output exhaust manifolds, from 92 Z28. Complete with air injection tubes and check valves. $125 85-92 High output Y-pipe with single 3" catalytic converter. Complete with air tube to cat and check valve. VERY NICE CONDITION! No rust, no rot, like new. $150 Combine HO y-pipe with matching HO manifolds above and I'll throw in the EFE riser delete spacer and reduce the price to $200 for everything. 87-92 OEM roller lifters, used. $50 87-92 aftermarket roller lifters, lightly used. $75 SLP dual cold air intake, for speed density TPI cars. Used. This is the same intake used on the 91-92 Firehawks. Long since discontinued, not available anywhere. $350 non-negotiable. 76 4-bolt main 350 core. 3970010 casting, 4-bolt mains, drivers side dipstick, crankshaft, dished pistons 4VR, recent double roller timing chain, recent Melling M55 oil pump w/pickup, oil pan, timing cover, pushrods, . No heads, no lifters, no flywheel. Everything else is there, disassembled. Ran when it was pulled, tore it down to rebuild and got sidetracked. Could probably be freshened up, or could be rebuilt. $150 All/Various --------- 82-92 Front spindles. Couple sets laying around. $offers? S10 manual steering gearbox. This is a bolt in conversion for 82-92 Fbody and various other GM. $50 S10 Non-AC heater box cover, no blower fan. Resistor pack and wiring harness is included. $50 Radiator support rods, $offer Vaccuum Brake booster. $offer Master Cylinders. $offer 10-bolt rear disc conversion set. PBR calipers, NEW GM backing plates and Ebrake cable guides. Very nice used hardlines and hoses. Everything you need to convert from drums to disc, except the proportioning valve and rotors. Calipers are cores only, will need to be rebuilt! $350 Buy with confidence. I've been a Thirdgen.org member since the beginning. Pic's are available on request. First come, first serve. Local sales take priority. No returns, refunds, exchanges. Check my Ebay feedback, eBay Member Profile for drew91formula. I've ever had an unhappy customer! I accept US postal money orders, cash, or Paypal. 10+ years in thirdgen parts business! For fastest results and prompt replies, email or PM me. I typically do not check replies!

pm sent!

hey u wouldnt happen to have a wiring harness to a gta i have a 88 need the harness

Do you have a vent cover for side window defroster vent?

headlight motors

are they 82 83 or are they 84 up


two wire ?

or three wire ?

if they are two wire then are they good and not cracked anywhere ?

also got a pic of that 2bbl non computer carb ?

stamping code off it ?


thanks

Did you guys even bother READING the ad before replying? Note that I posted this listing 6 months ago. Note that I clearly stated it was a moving sale, for local buyers only, with a limited timeline. I suppose just judging from my location being in KS, and the listing that I was selling parts in SD, would probably be a big tip that the time to reply is long since past.

I've already moved or thrown away everything listed, most of what was left went on Ebay. There isn't much left and it's not for sale because I'm tired of dealing with people that don't read the description.