Mid-West RegionRegional message board for WI, IL, IA, MI, MO, and MN to organize gatherings, meetings, and to help each other out.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
1)So i bought another 3rd gen the other day...this time it was a completely stripped out 1990 RS. I bought it as a complete car (minus motor) that was completely disassembled. I just needed a few parts off of it, but the price was right so I bought the whole car. I have basically the entire car for sale, incuding the body (really clean, with Illinois title). Complete gray interior, recently rebuilt T-5 trans, ground effects, etc....
2)I stripped out my '89 RS to build it up with new parts, so I have a nearly complete BLACK interior, a 2.8L, and a 700r4 in it.
3)I've been collecting these cars for YEARS and have a complete storage unit filled top to bottom with several cars worth of stuff that I've personally stripped out. I really have nearly everything you could need to build one of these cars up....RS or Z28. I even have a TPI motor sitting down there (complete with refurb computer, minus wiring harness). I have 2? complete 91-92 dashes down there. Tons on convertible parts, too. I collected vert parts to build my own, but that project is on hold for a while, and I don't need 3 of every part that I bought.
I would prefer local pickup on the larger stuff, as some of it is a pain to ship (large interior panels, transmissions, engines, hoods, complete cars, etc...), but will ship thru UPS and USPS on the rest of it. Let me know what you are needing, I just want it all out of here so that I have some room to work!
where in il u at I am looking for a roller for a project for one of my rebuild small blocks
I live in Williamsville, IL, which is 9 miles north of Springfield. The 1990 is a roller. It needs a trans and the interior put back in. I will try to get some pics of it up here.
----------
Quote:
Originally Posted by Pontiackid
how much would you want for a tpi motor. are they 5.0 or 5.7? and do you have the wiring for it too.
I believe the engine is a 5.0L. I am looking to get around $500 for the complete motor (with complete TPI setup still bolted to it) and a new refurbed computer that I bought. I don't have a wiring harness for it, as this is one of the few parts that I didn't personally pull.
Last edited by 911rsq; 03-21-2007 at 03:21 AM.
Reason: Automerged Doublepost
I need the arm rests on the doors in black if they are a reasonable price
what would you consider a resonable price. I believe I have 2 or 3 sets of these in black in good condition. I am just looking to get rid of this stuff. Make a fair offer and we will go from there. $25 for a pair plus shipping fair???? I will get you some pics if you are interested.
----------
Quote:
Originally Posted by cpullma2
How much for the top door plastics next to the window in black?
what's a fair price? I believe i have a few sets of these too.....
Hahahahahahaa.... I was wondering how long it was gonna take for you to see this and send me one..... It's all gotta go. Make me an offer on all of it!!!!!!!!!! I don't know if you saw, but I've got another car too. It's a '90 RS. If it's not raining too bad tomorrow, I'm gonna try to get a pic of it up on here.
Sorry guys...got all tied up on work and haven't gotten the chance to be on here in a few days.....
----------
Quote:
Originally Posted by 91CamaroRS305
how much you looking for the complete black interior? Looking for the rear carpet section, and all the plastics, thanks!
I've got most all of the plastics. A few pieces were cracked and we got rid of them, but it's mostly all there. I will get an inventory of it tomorrow night and post it up here for ya. I don't have the carpet. It was pretty tired and torn up so it got pitched.
Last edited by 911rsq; 03-26-2007 at 04:58 AM.
Reason: Automerged Doublepost
Convertible sail panels
Black door moldings
Black sunvisors
Foglight brackets
Camaro center console
I'm in West MI, and could come pick up if you have any/all of this stuff.
By convertible sail panels, are you referring to the side panels for the back seat? I've got several sets of those.
I'm still checking on the black door moldings, I thought I had a few of those, but haven't gotten down there to look...probably tomorrow on that.
I have at least one set of black sunvisors(with the black interior) but may have another set down there.
Sorry, no foglight brackets right now....those always seem to be missing on the cars I get.
I have 3 or 4 really nice consoles, and a few that could use a good cleaning. Are you looking for the whole thing, or just the upper, or just the lower? Carpet, or no carpet? I've got a gray one and a tan one, and I think I have one with no carpet.
Most of this stuff should be pretty easy to ship...the console would probably cost the most to ship, but if you bought a few things, then they could all be shipped together. Make me an offer on this stuff. It's gonna go cheap....it just needs to go!
----------
Quote:
Originally Posted by 89ROCDROPTOP
I could also use a nice sun visor for the DS, convertible
What color are you looking for? Most of the cars I've had have been coupes with no t-tops, so I don't have many of the t-top/vert visors, but I will check.
----------
Quote:
Originally Posted by 86L69
Got any EFE spacers?
Thanks
EFE? spacers
Last edited by 911rsq; 03-26-2007 at 05:05 AM.
Reason: Automerged Doublepost
The bottoms have pulled away some since I last looked at them. They are in pretty good shape. Would just need to re-glue or staple the material back to the frame to cinch the bottom back. I have another set, but will have to get down and get them out. I will post pics of them too.
----------
Quote:
Originally Posted by DJCobol
Lets see here:
Camaro center console
This is just one of them i have. i havent gotten around to cleaning this one up yet at all (i've cleaned several up to use, and this one looks like it's gonna clean up really nicely, just mainly dusty, nothing really dug in on it). this one is gray and has an upper console sitting on it with no power options and a 5-speed shifter plate. I also have power window upper consoles and automatic shift plates.
Last edited by 911rsq; 03-26-2007 at 05:40 AM.
Reason: fixin stuff
I've got most all of the plastics. A few pieces were cracked and we got rid of them, but it's mostly all there. I will get an inventory of it tomorrow night and post it up here for ya. I don't have the carpet. It was pretty tired and torn up so it got pitched.
let me know, what ever you have is better than what I dont, I only have a few pieces already but I need the door panels, plastics, and arm rests, condition isn't super important, but I dont want "holey" garbage
This is just one of them i have. i havent gotten around to cleaning this one up yet at all (i've cleaned several up to use, and this one looks like it's gonna clean up really nicely, just mainly dusty, nothing really dug in on it). this one is gray and has an upper console sitting on it with no power options and a 5-speed shifter plate. I also have power window upper consoles and automatic shift
I cracked mine in back where the ashtray is reinstalling it last winter. I have a good shiftplate and everything else, and the carpet condition doesn't matter because it will be recovered with black. What I really need right now though, is a factory Y-pipe for a V8 single cat setup. You happen to have one of those lying around?
I could really use an upper console for a manual transmission, someone ripped the radio out of mine a while back and cracked it all to hell. If you have one you would consider shipping to Texas if it's not to big, let me know a price.
Black would be nice to match the rest of the car, but anything would work if I can get those radio mounting screw holes back.. they were completely ripped off so I can't even glue a screw clip to the nub.
Last edited by memblin; 03-27-2007 at 07:53 PM.
Reason: left out color..
What color are you looking for? Most of the cars I've had have been coupes with no t-tops, so I don't have many of the t-top/vert visors, but I will check.
----------
Im looking for black DS visor. My arm rests look the same, Im looking for ones not separating
let me know. Thanks
I never heard anything back. Do you still have them??
Here's another set that I found. I think it's the earlier style. The material is good on these, not pulled away anywhere. I will try to track down the cap for the one with the white bracket showing.
----------
Quote:
Originally Posted by 91CamaroRS305
how much you looking for the complete black interior? Looking for the rear carpet section, and all the plastics, thanks!
The black interior is in pretty good shape, but not perfect. What sounds like a fair price? I'm not sure what they go for and just need all this stuff gone. If you are planning on having it shipped, shipping will be high because the rear plastics are pretty large and will be oversized shipping prices......
----------
Quote:
Originally Posted by KWIK84
Looking for side marker lens and clips, and Z28 badge for pass. gfx.
Got the marker lens...u just need 1 or 2? What's a fair price on em? Which style z28 badge you need? what year is the badge for?
Last edited by 911rsq; 03-31-2007 at 01:25 AM.
Reason: Automerged Doublepost
I could really use an upper console for a manual transmission, someone ripped the radio out of mine a while back and cracked it all to hell. If you have one you would consider shipping to Texas if it's not to big, let me know a price.
Black would be nice to match the rest of the car, but anything would work if I can get those radio mounting screw holes back.. they were completely ripped off so I can't even glue a screw clip to the nub.
The upper console is the same for the manual trans and the automatic, it just has a different shifter plate in place. are you needing the actual shifter plate or the upper part of the console. I have both. Power windows and/or power rear hatch release?
----------
Quote:
Originally Posted by 86L69
EFE Spacer: goes between the exhaust manifold and Y-pipe on one side only. Fuel injected motors only.
Haha..you learn something new every day. I've got an '89 with a 2.8L sitting in my garage right now. Would it be on that? What does it look like?
----------
Quote:
Originally Posted by 89ROCDROPTOP
I could also use a nice sun visor for the DS, convertible
I've got several nice sets of visors, no t-top/vert ones tho
----------
Quote:
Originally Posted by Pontiackid
how much would you want for a tpi motor. are they 5.0 or 5.7? and do you have the wiring for it too.
Last edited by 911rsq; 03-31-2007 at 01:31 AM.
Reason: Automerged Doublepost
How much for the top door plastics next to the window in black?
I've had several requests about these....All the ones that I have are attached to good door panels and I'd hate to pull them apart. I thought I had a set or 2 that were seperated from the panels or that the panels were in bad shape, but all the panels I have left are in good shape
----------
Quote:
Originally Posted by 92rs365hp
where in il u at I am looking for a roller for a project for one of my rebuild small blocks
Last edited by 911rsq; 03-31-2007 at 01:33 AM.
Reason: Automerged Doublepost
Do you still have the center counsel in grey? do you have any kick panels? Also do you have any other grey interior pieces do you also have a rear hatch? as well as a front clip? an iroc hood and fenders?
1)So i bought another 3rd gen the other day...this time it was a completely stripped out 1990 RS. I bought it as a complete car (minus motor) that was completely disassembled. I just needed a few parts off of it, but the price was right so I bought the whole car. I have basically the entire car for sale, incuding the body (really clean, with Illinois title). Complete gray interior, recently rebuilt T-5 trans, ground effects, etc....
2)I stripped out my '89 RS to build it up with new parts, so I have a nearly complete BLACK interior, a 2.8L, and a 700r4 in it.
3)I've been collecting these cars for YEARS and have a complete storage unit filled top to bottom with several cars worth of stuff that I've personally stripped out. I really have nearly everything you could need to build one of these cars up....RS or Z28. I even have a TPI motor sitting down there (complete with refurb computer, minus wiring harness). I have 2? complete 91-92 dashes down there. Tons on convertible parts, too. I collected vert parts to build my own, but that project is on hold for a while, and I don't need 3 of every part that I bought.
I would prefer local pickup on the larger stuff, as some of it is a pain to ship (large interior panels, transmissions, engines, hoods, complete cars, etc...), but will ship thru UPS and USPS on the rest of it. Let me know what you are needing, I just want it all out of here so that I have some room to work!
84 is the yr for the Z28 badge, i don't know if they were all the same color scheme or not, but the one I have for the drivers side is the tri-color red. As far as the side marker $10 shipped. BTW zip is 61615, so it shouldn't be to bad to ship.
Do you still have the center counsel in grey? do you have any kick panels? Also do you have any other grey interior pieces do you also have a rear hatch? as well as a front clip? an iroc hood and fenders?
I still have the gray console and a set of gry kick panels. I have a complete gray interior....maybe even 2 of them...possibly most of a 3rd!!! I hav 2 rear hatches and a front clip (2 fenders and the nose assembly). no IROC hoods tho.
I am off on friday, saturday, and sunday if you are interested in coming down. I would make you one heck of a deal on all this stuff...!!!!!!!
----------
Quote:
Originally Posted by loud91rs
What are you looking to get for the 89? If the price was right i'd want a lot of parts with it as well.
The blue one pictured is a '90 RS. If you want, give me a call on my cell tomorrow afternoon and we can get something worked out. If you are seriously interested in the car and parts, I will make you a killer deal!
This stuff has got to go....
Last edited by 911rsq; 04-02-2007 at 02:09 AM.
Reason: Automerged Doublepost
84 is the yr for the Z28 badge, i don't know if they were all the same color scheme or not, but the one I have for the drivers side is the tri-color red. As far as the side marker $10 shipped. BTW zip is 61615, so it shouldn't be to bad to ship.
$10 shipped on the side marker is good for me. I will have to check on the Z emblem this week. Send me a PM with your address for shipping.
-Dylan
awesome, if sunday is good for you id love to come on by sunday. Im coming from the nw side of chicago near skokie/lincolnwood area.
Sunday is perfect for me. If you are looking to get everything, then I'm sure we can make some good deals on parts...I've got TONS more of whatever you need. Make a list before you come down of anything you need. Call me on my cell (i'll send you a pm with it) on saturday and/or sunday and we can set up a time/place to meet.
-Dylan
do you still have the t5 and is it for a v8 looking to swap my 700r4 and need the trans and other swap related stuff let me know i could come pick up thanks
__________________ George
89 RS T-top, 305 TBI converted to TPI, flowtech headers and y- pipe, flowmaster cat back with 80 series muffler, tpis zz-9 cam, accel coil and wires, "camaro" grill, clear side markers, jamex STB, modified MAF and air filter boxes, K&N airfilters, reverse glow gauges, custom light up rear valance, edelbrock torque arm
I need the top dash pad for my 91. Also the ground effect on the left rear qtr. panel. Do you have a good rear hatch assembly? All I can think of for now...let me know what you have and price when you get a chance. Thanks!
looking for convertible trunk hindges.. will take both but need passenger side and hardware. how much shipped to 22602.. also need trunk deck lid but dont know if i can afford it right now but if price and shipping is right... possibly.. pm me if u have the parts please
