So I just spent this past weekend putting my '79 back together, and putting the freshly polished Cragar Draglites with new BFG rubber on (boy does she look good!). While I was in my shop I was looking around at all of the stuff I have laying around, and decided I need to get rid of it. Since it doesn't look like I'm going to be driving the Camaro to the meet, I will bring anything anyone wants to the GTG on the 3rd. Everything here is free to whoever wants it, as it is stuff I am likely to just toss later. Let me know. 1. '84 Z28 steering wheel. 3 spoke design, horn button is a bit jacked up and the leather has some sun damage. 2. A pair of passenger side tail light assemblies. Early design. One is in excellent condition, and one has very minor sun warpage on the black panel next to the liscense plate lamps. Take one or both. 3. Black leather rear seat back. Leather is in good shape, but has some sun fading on the top. 4. Lots of engine parts from my '84 Z28 (carbed 305). The guy dropped em off weeks ago and I don't need any of it. All parts are in usable or rebuildable condition to my knowledge. Block, heads, crank, intake, carb, ECM and harness, exhaust manifolds. Shoot me a message if you need anything from a motor of this vintage, I'll dig through the boxes he dropped off and see if it's here. 5. Extra set of control arms, and a panhard rod. 6. '79-'87 Buick Regal hood. Purple metallic paint, ond one minor pin sized dent. It was for a car I sold to make room for my '84 Z28. 7. GM powerglide transmission. I think the internals are seized, but the case appears to be in good shape. Pulled it from a guys shed thinking I might use it in the Regal I had. I'll get some pics up this evening, and rummage through the shop a bit more to see if there is anything else.

Would the Control Arm and Panhard bar be any good for boxing them? If so, Ill take them, unless someone needs them more for a project.

The control arms and panhard rod are all factory parts and in good condition. I don't see why they wouldn't work for a boxing project, if you want them they're yours.

Ill wait and see if anyone needs them more than me. If not, I'll take them.

That's cool man, I'll keep you posted.

Wouinder if i should get the rear seat back. to go with the new leather front seats. Would have to find some leather lower parts of the seat later on.
An if it fits in my baby.

It should fit fine, I'm pretty certain it came out of a 3rd gen. The only other car it would have come out of would be a 4th gen, and from what I've seen, those seats are usually a bolt in. Sure I'll bring it along to the meet.

Sounds good. You saw my rear seats, i still havent installed the new bottoms you hgave me lol

Sorry I didn't get any pics up, I got really busy over the past week getting my wife's Formula back on the road. I did get a better idea of the engine parts I have for that 305 though: Block, heads, rods and pistons, exhaust manifolrds with AIR lines, ECM, flexplate, crank and water pump pullys, valve covers, and a carb. Everything else was junk. I will try tonight to get some pics up for any last minute lookers.

Black leather rear seat-back is gone, thanks Travis.