Go Back   Third Generation F-Body Message Boards > Regional Boards > Northern California

Northern California Discussion board for Northern and Central California.

Welcome to ThirdGen.org!
Welcome to ThirdGen.org.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!


Reply
 
Thread Tools
Old 10-28-2009, 04:02 AM   #1
Senior Member
 
TraviZ's Avatar
 
Join Date: Sep 2003
Location: Folsom, CA
Posts: 9,022
Car: 89 IROC-Z
Engine: Procharged SBC
Transmission: One that transmits the power!
Axle/Gears: 10 Bolt 3.42

Classifieds Rating: (1)
Send a message via MSN to TraviZ
my digitally rendered iroc.

check it out. thanks to forza 3, digitally rendered, complete with primered bumpers/fenders/hood.
This ad is not displayed to registered members.
Register your free account today and become a member on ThirdGen!
Attached Images
File Type: jpg iroc.jpg (82.9 KB, 194 views)
__________________
SuperStreet in the making...
SBC, Forged internals, 215cc aluminum heads, 90mm TB, .600+ lift cam, Long tube headers, 3.5" exhaust. 9" Procharger. Powered by megasquirt 2
TraviZ is offline vBGarage Page   Reply With Quote
Sponsored Links
Registered users do not see this ad.
Click here to register for free!
Old 10-28-2009, 02:16 PM   #2
Senior Member
 
webeeZ28's Avatar
 
Join Date: Sep 2007
Location: Sacramento
Posts: 463
Car: 1992 Z28 L98 G92
Engine: 5.7 350 B2L
Transmission: 700 R4
Axle/Gears: 3.23

Classifieds Rating: (2)
Re: my digitally rendered iroc.

That's sweeeet baby
__________________
webeeZ28 is offline vBGarage Page   Reply With Quote
Old 10-28-2009, 02:38 PM   #3
Moderator
 
OUTATIME GTA's Avatar
 
Join Date: May 2001
Location: Sac, CA
Posts: 3,847
Car: '89 GTA
Engine: ProCharged TPI 350
Transmission: 700R4
Axle/Gears: 3.27/9-bolt

Classifieds Rating: (1)
Send a message via AIM to OUTATIME GTA
Re: my digitally rendered iroc.

Nice.
Where's the digitally rendered hole in your hood?
OUTATIME GTA is offline vBGarage Page   Reply With Quote
Old 10-28-2009, 03:06 PM   #4
Senior Member
 
Bullydawg's Avatar
 
Join Date: Nov 2006
Location: Chico, Ca
Posts: 2,316
Car: 1988 Formula 350
Engine: 5.7
Transmission: 700r4
Axle/Gears: 9 Bolt 3.27

Classifieds Rating: (1)
Send a message via AIM to Bullydawg
Re: my digitally rendered iroc.

Haha, I was thinking the same thing. Haha
__________________
88 Firebird Formula 350- 85,XXX miles *G92* *Ws6*
Superram- Trickflow Aluminum Heads- Powermax 2032 Cam- Crane Roller Rockers- BBK 52mm TB- 24lb Inj- SFC-
High Flow Cat- Wonderbar- BW 9 Bolt 3.27- FPR- Edelbrock TES Header & Y Pipe- 2900RPM Stall- STB- Nitto Drag Radials
13.7@101 2.2 60ft time... traction issues.

What needs to be installed:
Poly Bushings - Door Pins- 3.45 gears


For Sale:
Sub box for 2 12's $75.
Tall Polished C
enterbolt Valve Covers $85.
9 Bolt Carrier Parts
PM me if interested.





Bullydawg is offline vBGarage Page   Reply With Quote
Old 10-28-2009, 03:17 PM   #5
Senior Member
 
TraviZ's Avatar
 
Join Date: Sep 2003
Location: Folsom, CA
Posts: 9,022
Car: 89 IROC-Z
Engine: Procharged SBC
Transmission: One that transmits the power!
Axle/Gears: 10 Bolt 3.42

Classifieds Rating: (1)
Send a message via MSN to TraviZ
Re: my digitally rendered iroc.

i wish
__________________
SuperStreet in the making...
SBC, Forged internals, 215cc aluminum heads, 90mm TB, .600+ lift cam, Long tube headers, 3.5" exhaust. 9" Procharger. Powered by megasquirt 2
TraviZ is offline vBGarage Page   Reply With Quote
Old 10-28-2009, 03:18 PM   #6
Senior Member
 
Bullydawg's Avatar
 
Join Date: Nov 2006
Location: Chico, Ca
Posts: 2,316
Car: 1988 Formula 350
Engine: 5.7
Transmission: 700r4
Axle/Gears: 9 Bolt 3.27

Classifieds Rating: (1)
Send a message via AIM to Bullydawg
Re: my digitally rendered iroc.

Whats under the hood of your digitally rendered Iroc?
__________________
88 Firebird Formula 350- 85,XXX miles *G92* *Ws6*
Superram- Trickflow Aluminum Heads- Powermax 2032 Cam- Crane Roller Rockers- BBK 52mm TB- 24lb Inj- SFC-
High Flow Cat- Wonderbar- BW 9 Bolt 3.27- FPR- Edelbrock TES Header & Y Pipe- 2900RPM Stall- STB- Nitto Drag Radials
13.7@101 2.2 60ft time... traction issues.

What needs to be installed:
Poly Bushings - Door Pins- 3.45 gears


For Sale:
Sub box for 2 12's $75.
Tall Polished C
enterbolt Valve Covers $85.
9 Bolt Carrier Parts
PM me if interested.





Bullydawg is offline vBGarage Page   Reply With Quote
Old 10-28-2009, 07:52 PM   #7
Senior Member
 
TraviZ's Avatar
 
Join Date: Sep 2003
Location: Folsom, CA
Posts: 9,022
Car: 89 IROC-Z
Engine: Procharged SBC
Transmission: One that transmits the power!
Axle/Gears: 10 Bolt 3.42

Classifieds Rating: (1)
Send a message via MSN to TraviZ
Re: my digitally rendered iroc.

supercharged tpi.

Here del, this is for you.
Attached Images
File Type: jpg del.jpg (91.6 KB, 141 views)
TraviZ is offline vBGarage Page   Reply With Quote
Old 10-28-2009, 09:45 PM   #8
Senior Member
 
3rdBird's Avatar
 
Join Date: Jan 2008
Location: Sacramento Ca
Posts: 719
Car: 91 Pontiac Firebird
Engine: 406 Forged, Balanced, Ported.
Transmission: TH400, 9" 5000 Stall
Axle/Gears: Moser 12 Bolt, 373

Classifieds Rating: (0)
Re: my digitally rendered iroc.

Finally your car makes it to a track, even if its a virtual track. hah, jk. wheres my image?
3rdBird is offline vBGarage Page   Reply With Quote
Old 10-28-2009, 09:56 PM   #9
Senior Member
 
Stephen's Avatar
 
Join Date: Jul 1999
Location: Austin, TX
Posts: 8,207
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi

Classifieds Rating: (12)
Send a message via AIM to Stephen
Re: my digitally rendered iroc.

Quote:
Originally Posted by TraviZ View Post
supercharged tpi.

Here del, this is for you.
Apparently, the artists made ZERO attempt to render the tail light correctly on the TA.
__________________

Custom powder coated flat black ROH Snypers w/the correct 3rd gen offset (no spacers needed, front or rear) Front--275/40R17s on 17"x9"--5" bs & custom widened & custom powder coated Rear--315/35R17s on 17"x11"--7" bs,
4th gen front seats, OEM 2001 TA rear wing, OEM 1997 TA side mirrors
TSP LS1 Cat-back exhaust-UMI Rod Ended STB-UMI Double Rod Ended On-car Adjustable PHB-UMI Performance Adjustable Control Arms with Off-Set Bushings - Ground Control Weight Jacks, Eibach Springs 9.5"-600lb/10"-150lb


To be Installed:
UMI Performance Tie Rod Adjusters-Kenny Brown Double Diamond SFCs

Home of the STS (Sequential Turn Signal) mod
Parting Out - 1989 Pontiac Trans Am GTA


GOD Bless America
Stephen is offline vBGarage Page   Reply With Quote
Old 10-29-2009, 01:07 AM   #10
Senior Member
 
TraviZ's Avatar
 
Join Date: Sep 2003
Location: Folsom, CA
Posts: 9,022
Car: 89 IROC-Z
Engine: Procharged SBC
Transmission: One that transmits the power!
Axle/Gears: 10 Bolt 3.42

Classifieds Rating: (1)
Send a message via MSN to TraviZ
Re: my digitally rendered iroc.

Quote:
Originally Posted by 3rdBird View Post
Finally your car makes it to a track, even if its a virtual track. hah, jk. wheres my image?
they dont have 91-92 noses, so it wouldnt look correct
TraviZ is offline vBGarage Page   Reply With Quote
Old 10-29-2009, 11:02 AM   #11
Moderator
 
OUTATIME GTA's Avatar
 
Join Date: May 2001
Location: Sac, CA
Posts: 3,847
Car: '89 GTA
Engine: ProCharged TPI 350
Transmission: 700R4
Axle/Gears: 3.27/9-bolt

Classifieds Rating: (1)
Send a message via AIM to OUTATIME GTA
Re: my digitally rendered iroc.

Dude, that is SICK! Thanks.

Interesting look without the door moldings.

Is that basically the 87 and they let you customize the color and rims only?

Makes me want to get into road racing, etc.
OUTATIME GTA is offline vBGarage Page   Reply With Quote
Old 10-29-2009, 02:25 PM   #12
Senior Member
 
TraviZ's Avatar
 
Join Date: Sep 2003
Location: Folsom, CA
Posts: 9,022
Car: 89 IROC-Z
Engine: Procharged SBC
Transmission: One that transmits the power!
Axle/Gears: 10 Bolt 3.42

Classifieds Rating: (1)
Send a message via MSN to TraviZ
Re: my digitally rendered iroc.

ya its the 87 and you can paint it however you want and add pretty much any wheel and color as well. I think i left your wheels at 16" though, but who can tell.
__________________
SuperStreet in the making...
SBC, Forged internals, 215cc aluminum heads, 90mm TB, .600+ lift cam, Long tube headers, 3.5" exhaust. 9" Procharger. Powered by megasquirt 2
TraviZ is offline vBGarage Page   Reply With Quote
Old 10-29-2009, 02:26 PM   #13
Senior Member
 
TraviZ's Avatar
 
Join Date: Sep 2003
Location: Folsom, CA
Posts: 9,022
Car: 89 IROC-Z
Engine: Procharged SBC
Transmission: One that transmits the power!
Axle/Gears: 10 Bolt 3.42

Classifieds Rating: (1)
Send a message via MSN to TraviZ
Re: my digitally rendered iroc.

but look at it this way, wanna know what a thirdgen would look with a certain wheel? no longer photochop it on, forza it!
__________________
SuperStreet in the making...
SBC, Forged internals, 215cc aluminum heads, 90mm TB, .600+ lift cam, Long tube headers, 3.5" exhaust. 9" Procharger. Powered by megasquirt 2
TraviZ is offline vBGarage Page   Reply With Quote
Old 10-29-2009, 02:29 PM   #14
Senior Member
 
Bullydawg's Avatar
 
Join Date: Nov 2006
Location: Chico, Ca
Posts: 2,316
Car: 1988 Formula 350
Engine: 5.7
Transmission: 700r4
Axle/Gears: 9 Bolt 3.27

Classifieds Rating: (1)
Send a message via AIM to Bullydawg
Re: my digitally rendered iroc.

I can download photoshop for free. I can't download a 360 and forza for free... I do want to get a 360 and get this game though... one of these years when they are both cheaper.
__________________
88 Firebird Formula 350- 85,XXX miles *G92* *Ws6*
Superram- Trickflow Aluminum Heads- Powermax 2032 Cam- Crane Roller Rockers- BBK 52mm TB- 24lb Inj- SFC-
High Flow Cat- Wonderbar- BW 9 Bolt 3.27- FPR- Edelbrock TES Header & Y Pipe- 2900RPM Stall- STB- Nitto Drag Radials
13.7@101 2.2 60ft time... traction issues.

What needs to be installed:
Poly Bushings - Door Pins- 3.45 gears


For Sale:
Sub box for 2 12's $75.
Tall Polished C
enterbolt Valve Covers $85.
9 Bolt Carrier Parts
PM me if interested.





Bullydawg is offline vBGarage Page   Reply With Quote
Old 10-29-2009, 02:29 PM   #15
Senior Member
 
vindeezl's Avatar
 
Join Date: Jan 2005
Posts: 2,687
Car: '87 IROC-Z
Engine: 355 HSR
Transmission: T5666
Axle/Gears: G92

Classifieds Rating: (0)
Re: my digitally rendered iroc.

Do one of TBB since I'm still waiting on my 360!

Make sure it's sideways bro
vindeezl is offline vBGarage Page   Reply With Quote
Old 10-29-2009, 02:31 PM   #16
Senior Member
 
Bullydawg's Avatar
 
Join Date: Nov 2006
Location: Chico, Ca
Posts: 2,316
Car: 1988 Formula 350
Engine: 5.7
Transmission: 700r4
Axle/Gears: 9 Bolt 3.27

Classifieds Rating: (1)
Send a message via AIM to Bullydawg
Re: my digitally rendered iroc.

I think he mean parked sideways/crooked... right?

They don't have any body kits for them do they? If so, they need to be shot.

I still think they should have used Formula's and had the GTA kit as like a body kit upgrade or something.
__________________
88 Firebird Formula 350- 85,XXX miles *G92* *Ws6*
Superram- Trickflow Aluminum Heads- Powermax 2032 Cam- Crane Roller Rockers- BBK 52mm TB- 24lb Inj- SFC-
High Flow Cat- Wonderbar- BW 9 Bolt 3.27- FPR- Edelbrock TES Header & Y Pipe- 2900RPM Stall- STB- Nitto Drag Radials
13.7@101 2.2 60ft time... traction issues.

What needs to be installed:
Poly Bushings - Door Pins- 3.45 gears


For Sale:
Sub box for 2 12's $75.
Tall Polished C
enterbolt Valve Covers $85.
9 Bolt Carrier Parts
PM me if interested.






Last edited by Bullydawg; 10-29-2009 at 02:40 PM.
Bullydawg is offline vBGarage Page   Reply With Quote
Old 10-29-2009, 02:38 PM   #17
Senior Member
 
vindeezl's Avatar
 
Join Date: Jan 2005
Posts: 2,687
Car: '87 IROC-Z
Engine: 355 HSR
Transmission: T5666
Axle/Gears: G92

Classifieds Rating: (0)
Re: my digitally rendered iroc.

That too

One of these days I'll park properly...
__________________
"Congratulations, you've managed to drive this thread into the gutter." - adambros

"When the silver bullet and black beast get together though, it's like 10 thirdgens encompassed into 2." - OUTATIME GTA
vindeezl is offline vBGarage Page   Reply With Quote
Old 10-29-2009, 06:32 PM   #18
Senior Member
 
kairles's Avatar
 
Join Date: Nov 2003
Location: sacramento, CA
Posts: 3,049
Car: 90 Formula
Engine: Procharged LB9
Transmission: 700R4
Axle/Gears: 2.73 posi

Classifieds Rating: (0)
Send a message via Yahoo to kairles
Re: my digitally rendered iroc.

Almost make me wanna buy an Xbox
kairles is offline vBGarage Page   Reply With Quote
Old 10-29-2009, 07:53 PM   #19
Senior Member
 
TraviZ's Avatar
 
Join Date: Sep 2003
Location: Folsom, CA
Posts: 9,022
Car: 89 IROC-Z
Engine: Procharged SBC
Transmission: One that transmits the power!
Axle/Gears: 10 Bolt 3.42

Classifieds Rating: (1)
Send a message via MSN to TraviZ
Re: my digitally rendered iroc.

Quote:
Originally Posted by vindeezl View Post
Do one of TBB since I'm still waiting on my 360!

Make sure it's sideways bro
ill get on it!

Quote:
Originally Posted by Bullydawg View Post
I think he mean parked sideways/crooked... right?

They don't have any body kits for them do they? If so, they need to be shot.

I still think they should have used Formula's and had the GTA kit as like a body kit upgrade or something.
they have front carbon fiber wind splitters and a rear wing, ***** style, but functional
TraviZ is offline vBGarage Page   Reply With Quote
Old 10-29-2009, 07:54 PM   #20
Senior Member
 
vindeezl's Avatar
 
Join Date: Jan 2005
Posts: 2,687
Car: '87 IROC-Z
Engine: 355 HSR
Transmission: T5666
Axle/Gears: G92

Classifieds Rating: (0)
Re: my digitally rendered iroc.

Thanks bro
__________________
"Congratulations, you've managed to drive this thread into the gutter." - adambros

"When the silver bullet and black beast get together though, it's like 10 thirdgens encompassed into 2." - OUTATIME GTA
vindeezl is offline vBGarage Page   Reply With Quote
Old 10-30-2009, 04:06 PM   #21
Senior Member
 
DeathMetalTony's Avatar
 
Join Date: Nov 2007
Location: Ventura County, California
Posts: 482
Car: 1991 Z28 Camaro
Engine: 5.0L TPI
Transmission: 700R4
Axle/Gears: Stock

Classifieds Rating: (0)
Send a message via AIM to DeathMetalTony Send a message via Yahoo to DeathMetalTony
Re: my digitally rendered iroc.

Im so jealous on this game that sucks that I can buy this for the PS3.

Tony.
__________________



DeathMetalTony is offline vBGarage Page   Reply With Quote
Old 10-30-2009, 09:54 PM   #22
Senior Member
 
Join Date: Apr 2002
Location: Cincinnati
Posts: 2,962

Classifieds Rating: (0)
Send a message via AIM to Spdfrk1990
Re: my digitally rendered iroc.

Heres mine it has a cage, LS3, Fikse's .
Attached Images
File Type: jpg IROC1.jpg (169.6 KB, 75 views)
File Type: jpg IROC2.jpg (165.8 KB, 69 views)
Spdfrk1990 is offline vBGarage Page   Reply With Quote
Old 10-30-2009, 11:38 PM   #23
Senior Member
 
chevymec's Avatar
 
Join Date: Mar 2004
Location: Richlands N.C.
Posts: 480
Car: '85 Z-28 / '86 Iroc
Engine: 350 carb'd / 305 carb'd
Transmission: T-5 / A3
Axle/Gears: 4.10/3.23

Classifieds Rating: (1)
Re: my digitally rendered iroc.

Quote:
Originally Posted by Spdfrk1990 View Post
Heres mine it has a cage, LS3, Fikse's .

That is just how I've wanted my car to look! These guys are good.
chevymec is offline vBGarage Page   Reply With Quote
Old 10-31-2009, 12:37 AM   #24
Senior Member
 
fryer1979's Avatar
 
Join Date: Oct 2008
Location: The Sticks, Ca.
Posts: 599
Car: '84 Z28 / '79 Camaro
Engine: None / 350
Transmission: None / TH-350, 2500 stall
Axle/Gears: None / posi 10 bolt

Classifieds Rating: (0)
Re: my digitally rendered iroc.

Very cool. Almost makes me want to buy a new gaming system; almost.
fryer1979 is offline vBGarage Page   Reply With Quote
Old 10-31-2009, 12:47 AM   #25
Senior Member
 
Stephen's Avatar
 
Join Date: Jul 1999
Location: Austin, TX
Posts: 8,207
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi

Classifieds Rating: (12)
Send a message via AIM to Stephen
Re: my digitally rendered iroc.

We just need someone who owns the game, willing to build our cars in it & send us the pics!

I'll "let" someone start with my white, dropped, 17" Snyper wheeled, 1987 Pontiac Trans Am GTA.

PLEASE!
__________________

Custom powder coated flat black ROH Snypers w/the correct 3rd gen offset (no spacers needed, front or rear) Front--275/40R17s on 17"x9"--5" bs & custom widened & custom powder coated Rear--315/35R17s on 17"x11"--7" bs,
4th gen front seats, OEM 2001 TA rear wing, OEM 1997 TA side mirrors
TSP LS1 Cat-back exhaust-UMI Rod Ended STB-UMI Double Rod Ended On-car Adjustable PHB-UMI Performance Adjustable Control Arms with Off-Set Bushings - Ground Control Weight Jacks, Eibach Springs 9.5"-600lb/10"-150lb


To be Installed:
UMI Performance Tie Rod Adjusters-Kenny Brown Double Diamond SFCs

Home of the STS (Sequential Turn Signal) mod
Parting Out - 1989 Pontiac Trans Am GTA


GOD Bless America

Last edited by Stephen; 10-31-2009 at 09:57 AM.
Stephen is offline vBGarage Page   Reply With Quote
Old 10-31-2009, 04:17 AM   #26
Senior Member
 
TraviZ's Avatar
 
Join Date: Sep 2003
Location: Folsom, CA
Posts: 9,022
Car: 89 IROC-Z
Engine: Procharged SBC
Transmission: One that transmits the power!
Axle/Gears: 10 Bolt 3.42

Classifieds Rating: (1)
Send a message via MSN to TraviZ
Re: my digitally rendered iroc.

ill get on it tomorrow as well.
__________________
SuperStreet in the making...
SBC, Forged internals, 215cc aluminum heads, 90mm TB, .600+ lift cam, Long tube headers, 3.5" exhaust. 9" Procharger. Powered by megasquirt 2
TraviZ is offline vBGarage Page   Reply With Quote
Old 10-31-2009, 09:42 PM   #27
Senior Member
 
fryer1979's Avatar
 
Join Date: Oct 2008
Location: The Sticks, Ca.
Posts: 599
Car: '84 Z28 / '79 Camaro
Engine: None / 350
Transmission: None / TH-350, 2500 stall
Axle/Gears: None / posi 10 bolt

Classifieds Rating: (0)
Re: my digitally rendered iroc.

You know, I'd actually pay a small fee to cover someone's time for a couple pics of my two rides. Sure would beat buying the whole system, I'm just not that into video games.
fryer1979 is offline vBGarage Page   Reply With Quote
Old 10-31-2009, 09:44 PM   #28
Moderator
 
OUTATIME GTA's Avatar
 
Join Date: May 2001
Location: Sac, CA
Posts: 3,847
Car: '89 GTA
Engine: ProCharged TPI 350
Transmission: 700R4
Axle/Gears: 3.27/9-bolt

Classifieds Rating: (1)
Send a message via AIM to OUTATIME GTA
Re: my digitally rendered iroc.

Post up your Paypal email Travis for donations.
OUTATIME GTA is offline vBGarage Page   Reply With Quote
Old 10-31-2009, 09:51 PM   #29
Senior Member
 
Join Date: Jul 2000
Location: Somewhere lost in the Sunshine state
Posts: 4,764
Car: 92 Vert
Engine: 383 LT1 w/ Novi 2000 SC
Transmission: 700r4
Axle/Gears: 3.45 9bolt

Classifieds Rating: (27)
Re: my digitally rendered iroc.

too bad it wasnt a 91/92 vert.
__________________
92 Vert | 383 LT1 , Ported heads | Callies crank & rods | JE Pistons | Novi 2000 supercharger | 125 Shot Nitrous | SLP Headers | Alloy Engineering Strut Mounts | spohon adj. trq arm & T56 cross member | 9bolt with 3.45's
TPl383 is offline vBGarage Page   Reply With Quote
Old 10-31-2009, 10:11 PM   #30
Senior Member
 
kairles's Avatar
 
Join Date: Nov 2003
Location: sacramento, CA
Posts: 3,049
Car: 90 Formula
Engine: Procharged LB9
Transmission: 700R4
Axle/Gears: 2.73 posi

Classifieds Rating: (0)
Send a message via Yahoo to kairles
Re: my digitally rendered iroc.

Quote:
Originally Posted by OUTATIME GTA View Post
Post up your Paypal email Travis for donations.
That can be his t56 fund
kairles is offline vBGarage Page   Reply With Quote
Old 10-31-2009, 10:45 PM   #31
Senior Member
 
Stephen's Avatar
 
Join Date: Jul 1999
Location: Austin, TX
Posts: 8,207
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi

Classifieds Rating: (12)
Send a message via AIM to Stephen
Re: my digitally rendered iroc.

Should we start charging for our Adobe Photoshop services too?
Stephen is offline vBGarage Page   Reply With Quote
Old 10-31-2009, 11:00 PM   #32
Senior Member
 
Join Date: Jul 2000
Location: Somewhere lost in the Sunshine state
Posts: 4,764
Car: 92 Vert
Engine: 383 LT1 w/ Novi 2000 SC
Transmission: 700r4
Axle/Gears: 3.45 9bolt

Classifieds Rating: (27)
Re: my digitally rendered iroc.

Quote:
Originally Posted by Stephen View Post
Should we start charging for our Adobe Photoshop services too?

If somebody offered to give you a donation for your time and rendering I wouldnt bitch.

go look what Kris H charges for renderings.

http://www.carsbykris.com/1024site/index.html
TPl383 is offline vBGarage Page   Reply With Quote
Old 10-31-2009, 11:02 PM   #33
Senior Member
 
Stephen's Avatar
 
Join Date: Jul 1999
Location: Austin, TX
Posts: 8,207
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi

Classifieds Rating: (12)
Send a message via AIM to Stephen
Re: my digitally rendered iroc.

Quote:
Originally Posted by TPl383 View Post
If somebody offered to give you a donation for your time and rendering I wouldnt bitch.

go look what Kris H charges for renderings.

http://www.carsbykris.com/1024site/index.html
There is a difference between charging & accepting donations.


I'll never turn down a donation, but I won't charge either.
Stephen is offline vBGarage Page   Reply With Quote
Old 10-31-2009, 11:20 PM   #34
Senior Member
 
fryer1979's Avatar
 
Join Date: Oct 2008
Location: The Sticks, Ca.
Posts: 599
Car: '84 Z28 / '79 Camaro
Engine: None / 350
Transmission: None / TH-350, 2500 stall
Axle/Gears: None / posi 10 bolt

Classifieds Rating: (0)
Re: my digitally rendered iroc.

I'm still trying to find where someone was talking about charging.... For me it's late, I've had a long day, and I'm beat so I could just be having a dumb*** moment, I just don't see it.
fryer1979 is offline vBGarage Page   Reply With Quote
Old 10-31-2009, 11:33 PM   #35
Senior Member
 
Join Date: Jul 2000
Location: Somewhere lost in the Sunshine state
Posts: 4,764
Car: 92 Vert
Engine: 383 LT1 w/ Novi 2000 SC
Transmission: 700r4
Axle/Gears: 3.45 9bolt

Classifieds Rating: (27)
Re: my digitally rendered iroc.

he never said he was charging. Someone told him to post up his paypal and they would glady pay him something to do 2 cars for them.
__________________
92 Vert | 383 LT1 , Ported heads | Callies crank & rods | JE Pistons | Novi 2000 supercharger | 125 Shot Nitrous | SLP Headers | Alloy Engineering Strut Mounts | spohon adj. trq arm & T56 cross member | 9bolt with 3.45's
TPl383 is offline vBGarage Page   Reply With Quote
Old 10-31-2009, 11:58 PM   #36
Senior Member
 
MADMAXGTA's Avatar
 
Join Date: Mar 2007
Location: Iowa
Posts: 304
Car: 89 GTA hardtop
Engine: Stealth rammed L98
Transmission: bowtie stage 2 700r4
Axle/Gears: 3.27 9 bolt

Classifieds Rating: (1)
Re: my digitally rendered iroc.

These are all awesome!,would some one be intrested and making a few 3rd gens for GTA4 PC?
I play gta4 all the time and have some seen awesome mods,But no 3rd gens anywhere on any of the modding sites! such has http://www.gta4-mods.com/
Any help would be great thx.

Last edited by MADMAXGTA; 11-01-2009 at 12:01 AM.
MADMAXGTA is offline vBGarage Page   Reply With Quote
Old 11-01-2009, 12:00 AM   #37
Senior Member
 
fryer1979's Avatar
 
Join Date: Oct 2008
Location: The Sticks, Ca.
Posts: 599
Car: '84 Z28 / '79 Camaro
Engine: None / 350
Transmission: None / TH-350, 2500 stall
Axle/Gears: None / posi 10 bolt

Classifieds Rating: (0)
Re: my digitally rendered iroc.

Yeah, that was me. I was just curious where Stephen got his idea from, I didn't see anyone even suggesting that TraviZ charge.

I really gotta start remembering to use the quote feature!

Last edited by fryer1979; 11-01-2009 at 12:03 AM.
fryer1979 is offline vBGarage Page   Reply With Quote
Old 11-01-2009, 12:24 AM   #38
Senior Member
 
Stephen's Avatar
 
Join Date: Jul 1999
Location: Austin, TX
Posts: 8,207
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi

Classifieds Rating: (12)
Send a message via AIM to Stephen
Re: my digitally rendered iroc.

Y'all are blind.....

Quote:
Originally Posted by fryer1979 View Post
You know, I'd actually pay a small fee to cover someone's time for a couple pics of my two rides. Sure would beat buying the whole system, I'm just not that into video games.
Stephen is offline vBGarage Page   Reply With Quote
Old 11-01-2009, 12:32 AM   #39
Senior Member
 
fryer1979's Avatar
 
Join Date: Oct 2008
Location: The Sticks, Ca.
Posts: 599
Car: '84 Z28 / '79 Camaro
Engine: None / 350
Transmission: None / TH-350, 2500 stall
Axle/Gears: None / posi 10 bolt

Classifieds Rating: (0)
Re: my digitally rendered iroc.

Quote:
Originally Posted by Stephen View Post
Y'all are blind.....
Chalk it up to being tired, but that wasn't what I was meaning at all. I was just offering to compensate the man for his time since he has the system I don't want to dish out $300 for.
fryer1979 is offline vBGarage Page   Reply With Quote
Old 11-01-2009, 12:40 AM   #40
Senior Member
 
Stephen's Avatar
 
Join Date: Jul 1999
Location: Austin, TX
Posts: 8,207
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi

Classifieds Rating: (12)
Send a message via AIM to Stephen
Re: my digitally rendered iroc.

Ever priced Adobe Photoshop? The whole game system is a bargain compared!


And yet we have an entire Forum dedicated to free Photoshop requests.

But I consider my Photoshops as good practice in keeping my skills sharp, as well as learning new tricks & techniques. Not as a service I'd charge for, although earning $ back on the software alone (not to mention the classes to learn) isn't exactly cheap.
Stephen is offline vBGarage Page   Reply With Quote
Old 11-01-2009, 01:02 AM   #41
Senior Member
 
TraviZ's Avatar
 
Join Date: Sep 2003
Location: Folsom, CA
Posts: 9,022
Car: 89 IROC-Z
Engine: Procharged SBC
Transmission: One that transmits the power!
Axle/Gears: 10 Bolt 3.42

Classifieds Rating: (1)
Send a message via MSN to TraviZ
Re: my digitally rendered iroc.

calm down folks, ill do some photos tonight. ill post them in a bit. its too easy to do in game, no charges required, but if you think its really awesome, aww hell, sojorn@gmail.com
__________________
SuperStreet in the making...
SBC, Forged internals, 215cc aluminum heads, 90mm TB, .600+ lift cam, Long tube headers, 3.5" exhaust. 9" Procharger. Powered by megasquirt 2
TraviZ is offline vBGarage Page   Reply With Quote
Old 11-01-2009, 01:43 AM   #42
Senior Member
 
TraviZ's Avatar
 
Join Date: Sep 2003
Location: Folsom, CA
Posts: 9,022
Car: 89 IROC-Z
Engine: Procharged SBC
Transmission: One that transmits the power!
Axle/Gears: 10 Bolt 3.42

Classifieds Rating: (1)
Send a message via MSN to TraviZ
Re: my digitally rendered iroc.

as requested, vin and stephen.
anyone else? stephen- didnt have actual ROH wheels, this is my closest match, if i find better matches later, ill fix it.
Attached Images
File Type: jpg vin.jpg (98.4 KB, 58 views)
File Type: jpg stephan.jpg (129.0 KB, 57 views)
TraviZ is offline vBGarage Page   Reply With Quote
Old 11-01-2009, 01:45 AM   #43
Senior Member
 
MADMAXGTA's Avatar
 
Join Date: Mar 2007
Location: Iowa
Posts: 304
Car: 89 GTA hardtop
Engine: Stealth rammed L98
Transmission: bowtie stage 2 700r4
Axle/Gears: 3.27 9 bolt

Classifieds Rating: (1)
Re: my digitally rendered iroc.

nice work!,can you do my gta? what you need just a pic?
__________________
http://i96.photobucket.com/albums/l183/m33pstah/colt.jpg
MADMAXGTA is offline vBGarage Page   Reply With Quote
Old 11-01-2009, 01:46 AM   #44
Senior Member
 
Stephen's Avatar
 
Join Date: Jul 1999
Location: Austin, TX
Posts: 8,207
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi

Classifieds Rating: (12)
Send a message via AIM to Stephen
Re: my digitally rendered iroc.

Thanks! Maybe I can Phtoshop the details to bring it closer, but damn that looks good!
Stephen is offline vBGarage Page   Reply With Quote
Old 11-01-2009, 01:24 AM   #45
Senior Member
 
fryer1979's Avatar
 
Join Date: Oct 2008
Location: The Sticks, Ca.
Posts: 599
Car: '84 Z28 / '79 Camaro
Engine: None / 350
Transmission: None / TH-350, 2500 stall
Axle/Gears: None / posi 10 bolt

Classifieds Rating: (0)
Re: my digitally rendered iroc.

Quote:
Originally Posted by Stephen View Post
Ever priced Adobe Photoshop? The whole game system is a bargain compared!


And yet we have an entire Forum dedicated to free Photoshop requests.

But I consider my Photoshops as good practice in keeping my skills sharp, as well as learning new tricks & techniques. Not as a service I'd charge for, although earning $ back on the software alone (not to mention the classes to learn) isn't exactly cheap.
Well Stephen, I do apologise. I always thought photoshop was just a free download, but then again I'm not really a computer person. The point is, I believe, I wasn't trying to insinuate (god it's too late for words like that!) that TraviZ should charge. I have never asked for ANY photoshop work from anyone, but if I need something I will keep you in mind, and of course my offer for compensation would apply to you as well. I don't like working for free, and I would never expect anyone else to, wheather they ask for payment or not, that's just how I am.
fryer1979 is offline vBGarage Page   Reply With Quote
Old 11-01-2009, 04:04 AM   #46
Senior Member
 
Join Date: Feb 2009
Posts: 456
Car: 1986 IROC-Z
Engine: 350 C.I. 5.7 Litre
Transmission: 700R4
Axle/Gears: 3:42 Posi

Classifieds Rating: (1)
Re: my digitally rendered iroc.

Hm, I like this. TraviZ, could you whip me up a nice black IROC, with IROC wheels if available?

My IROC will be black as soon as I have $1,500+, so I may as well request something that color!
__________________
Shadow Z
www.cardomain.com/ride/3368171
Shadow Z is offline vBGarage Page   Reply With Quote
Old 11-01-2009, 12:28 PM   #47
Senior Member
 
Join Date: Apr 2002
Location: Cincinnati
Posts: 2,962

Classifieds Rating: (0)
Send a message via AIM to Spdfrk1990
Re: my digitally rendered iroc.

Heres a black GTA I did with BBS rims.

And the Iroc again....

02SS I had a 01 just like it.

And the NBM TA


I just wish we could DL these strait to a flash drive from the XBOX.

Last edited by Spdfrk1990; 11-01-2009 at 12:32 PM.
Spdfrk1990 is offline vBGarage Page   Reply With Quote
Old 11-01-2009, 12:31 PM   #48
Senior Member
 
MADMAXGTA's Avatar
 
Join Date: Mar 2007
Location: Iowa
Posts: 304
Car: 89 GTA hardtop
Engine: Stealth rammed L98
Transmission: bowtie stage 2 700r4
Axle/Gears: 3.27 9 bolt

Classifieds Rating: (1)
Re: my digitally rendered iroc.

AWESOME!! make one with my rims!!! please i posted a post above,Im messing with photoshop has we speak:P
__________________
http://i96.photobucket.com/albums/l183/m33pstah/colt.jpg
MADMAXGTA is offline vBGarage Page   Reply With Quote
Old 11-01-2009, 12:41 PM   #49
Senior Member
 
Join Date: Apr 2002
Location: Cincinnati
Posts: 2,962

Classifieds Rating: (0)
Send a message via AIM to Spdfrk1990
Re: my digitally rendered iroc.

Quote:
Originally Posted by XxCoLTxX View Post
AWESOME!! make one with my rims!!! please i posted a post above,Im messing with photoshop has we speak:P
Sure Ill make 1 later tonight im sure there are some similar to that.
Spdfrk1990 is offline vBGarage Page   Reply With Quote
Old 11-01-2009, 12:43 PM   #50
Senior Member
 
MADMAXGTA's Avatar
 
Join Date: Mar 2007
Location: Iowa
Posts: 304
Car: 89 GTA hardtop
Engine: Stealth rammed L98
Transmission: bowtie stage 2 700r4
Axle/Gears: 3.27 9 bolt

Classifieds Rating: (1)
Re: my digitally rendered iroc.

Ever play gta4 on pc? ther is a z-modeler program for it,so you could make a 3rd gen,noone has yet.
__________________
http://i96.photobucket.com/albums/l183/m33pstah/colt.jpg
MADMAXGTA is offline vBGarage Page   Reply With Quote


Reply

Go Back   Third Generation F-Body Message Boards > Regional Boards > Northern California

Tags
carbon, fiber, iroc
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

 

1982 Camaro '82 || 1983 Camaro '83 || 1984 Camaro '84 || 1985 Camaro '85 || 1986 Camaro '86 || 1987 Camaro '87 || 1988 Camaro '88 || 1989 Camaro '89 || 1990 Camaro '90 || 1991 Camaro '91 || 1992 Camaro '92


All times are GMT -5. The time now is 06:28 AM.


Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0
All content copyright © 1997 - 2009 ThirdGen.org. All rights reserved. No part of this website may be reproduced without the expressed, documented, and written consent of ThirdGen.org's Administrators.