Organized Drag Racing and AutocrossDrag racing and autocross discussions and questions. Techniques, tips, suggestions, and "what will I run?" questions.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
At the Cecil County RAM Race I went 8.80@156.52 MPH weight at the end of the run was 3540 lbs. Stock suspention, on a 275/60/15. 515 Pontiac N.A. with RPM Heads and Victor Intake.
This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!
Sponsored Links
Registered users do not see this ad. Click here to register for free!
__________________ my car thats never done
"I'd rather be judged by 12 than carried by 6"
First Place Camaro Modified Thirdgenfest '05, Second Place Camaro Modified Thirdgenfest '06, Best Modified Camaro Thirdgenfest '07 , Second Place Camaro Modified Thirdgenfest '08
MFBA March 2008 Featured Calendar Vehicle
8.80s @156 is gettin it done @ 35xx with a conventional headed single 4 barrel (if it's a 4150 i'll jock even harder) na motor, even if it is 500 somethin cubes. props for doin it on stock suspension and a 275
Congrats man that is haulin the mail. Just wondering you said 275/60/15 which would mean probably a street radial right? The picture you posted doesnt look like a 275/60/15 street radial though. Just wondering what your 60 foots are on the 275/60/15. Congrats again though.
also looks like more preload needs to be added to the anti-roll bar since it picked the tires up unevenly from that pic angle at least.
__________________ my car thats never done
"I'd rather be judged by 12 than carried by 6"
First Place Camaro Modified Thirdgenfest '05, Second Place Camaro Modified Thirdgenfest '06, Best Modified Camaro Thirdgenfest '07 , Second Place Camaro Modified Thirdgenfest '08
MFBA March 2008 Featured Calendar Vehicle
If I can ever get down to a sea level track, I might be able to get an 8 second timeslip. I could also throw a NOS system on my engine and do it at altitude
__________________
87 IROC-Z
All engine, no power adders! Bests: 9.348@144.71
At the Cecil County RAM Race I went 8.80@156.52 MPH weight at the end of the run was 3540 lbs. Stock suspention, on a 275/60/15. 515 Pontiac N.A. with RPM Heads and Victor Intake.
Nice. I'm a huge Poncho fan, do you have any engine shots....?
Congrats man that is haulin the mail. Just wondering you said 275/60/15 which would mean probably a street radial right? The picture you posted doesnt look like a 275/60/15 street radial though. Just wondering what your 60 foots are on the 275/60/15. Congrats again though.
Congrats man. I was there that day sitting on your trailer before you ran that time. I guess you like the hoosiers.
Yea, That was a LONG weekend! I think the Goodyears would work if I had put in more air. It would seem that a car this heavy you need a bit higher Air PSI (20+) The Air factor was 1400 ft that run. This was my frist full pass on the car with this motor. I am sure it will go better at some point. I am still learning what it will like. Ed Quay has been Huge in getting the car set up. The car only hit a 1.36 60 ft and just barley pulled the tires up. The car with the old 477 cid went 1.28 60 ft(9.19 @147.92 MPH only 3380 lbs) with a lot less HP....So I will be trying my best to chop away at the 60ft. I would think Mid 1.20's should be able to be had with the current set up. I have never run any of my cars up on a MT top But I know the NHRA has a factor they use to compare to sea (0.0 FT) Cecil is 347 Ft above. I am sure you can look it up. I was Just very happy that the 3 yrs of Building and planning actully all came together and Ran the E.T I had in mind and had a little extra MPH than I had thought. Thanks Guys!
Last edited by PROSTOCK5031; 10-04-2009 at 04:01 PM.