Organized Drag Racing and AutocrossDrag racing and autocross discussions and questions. Techniques, tips, suggestions, and "what will I run?" questions.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
R/T .553,
60' 1.875,
330' 5.576,
1/8th 8.705.
MPH 78.74.. I launched it very easy, still stock rear with 3.73 gears, 700R4 TCI Street Fighter,ET Street 26x11.50x16 on stock rims, Alu Drive shaft, A/C and smog delete,K&N, stock engine just a Adjustable FP reg. On a car I just drove from Utah to Virginia with 180,000 miles on the clock.....
Damn, if I could cut a 1.8 my car should be in the 12s... I cut 2.2's with my nitto drag radials... I did cut a 1.9 but my ses light came on and I lost all power.
I WILL HAVE some 1/4 mile time Nov 7 or 8 for sure. Going to MIR Buds Creek Md for Import Vs Domestic weekend and will see if I can run a little better....Check out my link foe Info...
nice, i run a 9.20 in the 1/8 and my car is set up almost identical to yours, my r/t was .01-.02 with 2.1-2.2 60 ft times, my car was spinnin and hoppin through 1st and 2nd, on street tires. i ordered lcarb and tubular lca w/ poly bushings from spohn. hopefully i can hook up and see times similar to yours. where in va do u live and where what track you go to
nice, i run a 9.20 in the 1/8 and my car is set up almost identical to yours, my r/t was .01-.02 with 2.1-2.2 60 ft times, my car was spinnin and hoppin through 1st and 2nd, on street tires. i ordered lcarb and tubular lca w/ poly bushings from spohn. hopefully i can hook up and see times similar to yours. where in va do u live and where what track you go to
Northern Va around Manassas. I go to Summerduck and Old Dominion for race tracks. Look at my sig
I have a similar car but it has built motor(388stroker) and trans(350 turbo 3500 stal) goes 7.33 best in the 1/8th at 93mph stock suspension on 93 pump gas.
__________________ 1989 RS Drag Car
Motor-388 stroker 93 octane pump gas open headers
Tran-built 350 turbo with 3500 tci converter B&M Zgate Shifter
4.10 gears with mini spool
Best 1/8th mile- 7.33 at 93MPH
I have a similar car but it has built motor(388stroker) and trans(350 turbo 3500 stal) goes 7.33 best in the 1/8th at 93mph stock suspension on 93 pump gas.