Organized Drag Racing and Autocross Drag racing and autocross discussions and questions. Techniques, tips, suggestions, and "what will I run?" questions.

Gains switching to Weld Wheels (or similar)

Old 12-31-2012, 12:33 AM
  #1  
Supreme Member

Thread Starter
iTrader: (1)
 
unknown_host's Avatar
 
Join Date: Mar 2001
Location: Medford, Oregon
Posts: 3,245
Likes: 0
Received 1 Like on 1 Post
Car: 1989 Iroc Z L98
Gains switching to Weld Wheels (or similar)

Hey guys,

What 1/4 gains have you seen switching from stock 16" Iroc (or similar) wheels to something like a Weld Drag Lite or Pro Star?

I google'd the topic, and it appears the stock 16" Iroc wheels weigh 22-24 lbs a piece without tires.

Weld Drag Lites would weigh 10 lbs each for the fronts, and 13 lbs each for the rears.

So 24*4 = 96 lbs for stock wheels
10* 2 + 13*2 = 46 lbs for Welds (20 in the front, 26 in the rear)

What type of gains would you expect to see making this switch on a 12-14 second street/strip car.
Old 12-31-2012, 01:09 AM
  #2  
Supreme Member
iTrader: (1)
 
project89's Avatar
 
Join Date: Apr 2008
Location: Utah
Posts: 10,401
Likes: 0
Received 2 Likes on 2 Posts
Car: 89 RS 89 iroc 87 firebird
Engine: 3.1 Turbo/ 355 twin turbo
Transmission: a4 w/ 4500 stall/ a4 / t5
Axle/Gears: strange s60 /w 3:42's
Re: Gains switching to Weld Wheels (or similar)

i cant give u exact gains since i also made some other changes to the car but
on 16" iroc rims with a drag radial the car would 60' 1.85-1.92 .
when i swaped to a set of draglites and a 26x9 hosier slick the car would go 1.71-1.75 60' consistently with the same launch i would use on the 16" irocs and drag radial

i later swaped to a 28x10 slick on the draglites and it would slow down slightly in the 60 unless i launched at a higher bost level

so yes the weight difference will make a decent gain
Old 12-31-2012, 09:59 AM
  #3  
Supreme Member

 
cuisinartvette's Avatar
 
Join Date: Feb 2006
Location: Sanctuary state
Posts: 1,780
Likes: 0
Received 27 Likes on 24 Posts
Car: 67 ******mobile
Engine: 385 Solid roller
Transmission: T-56
Axle/Gears: 4.11
Re: Gains switching to Weld Wheels (or similar)

Tires weight less also
Figured about 9x lbs for my A body.
Would guess maybe a tenth tops but with less roll resistance could be more
Maybe someone with real before/after experience with slips can chime in.
Old 12-31-2012, 12:40 PM
  #4  
Supreme Member

iTrader: (2)
 
jbenge's Avatar
 
Join Date: Sep 1999
Location: Danville, IN
Posts: 1,481
Received 41 Likes on 27 Posts
Car: 1991 Camaro Z28
Engine: LS1
Transmission: 4L60E
Axle/Gears: Strange 12 Bolt, 3.42
Re: Gains switching to Weld Wheels (or similar)

I did the test way back when my car was running in the 12-13sec range and it was worth about .10-.15 sec and 1-2mph if I remember correctly.
Old 12-31-2012, 12:54 PM
  #5  
Moderator

 
AlkyIROC's Avatar
 
Join Date: Jul 1999
Location: 51°N 114°W, 3500'
Posts: 17,108
Likes: 0
Received 120 Likes on 101 Posts
Car: 87 IROC L98
Engine: 588 Alcohol BBC
Transmission: Powerglide
Axle/Gears: Ford 9"/31 spline spool/4.86
Re: Gains switching to Weld Wheels (or similar)

You're reducing unsprung weight. The rule is for ever 100 pounds you can remove from the car, you should be able to go 0.1 seconds faster. Removing unsprung weight has even more advantage.

Sprung weight is supported by the springs and is controlled by the shocks. Unsprung weight is dead weight. It's just along for the ride. Lightweight rims, brakes, diff etc all contribute to reducing that unsprung weight.

How much gain you get by switching to a lightweight rim will probably vary depending on the car. One of my 32x16 slicks mounted on a 15x15 rim is lighter than a steel belted radial.
Old 12-31-2012, 07:42 PM
  #6  
Member

 
BLACK92B4C's Avatar
 
Join Date: Jan 2002
Location: Franklin, TN
Posts: 195
Likes: 0
Received 0 Likes on 0 Posts
Car: 92 B4C 1LE/2010 GT/2003 P71/2002 Z2
Engine: 5.7/4.6/4.6/5/7
Transmission: A4/A5/A4/A4
Axle/Gears: 3:23/3:73/3:23/3:73
Re: Gains switching to Weld Wheels (or similar)

Also don't forget where you are saving the weight...running the skinnies on the nose improves weight transfer to the rear when you launch. My 4th gen consistently picks up .15 - .20 with the skinnies on compared to 17" rims.
Old 01-04-2013, 08:11 AM
  #7  
Supreme Member

iTrader: (20)
 
Orr89RocZ's Avatar
 
Join Date: Sep 2003
Location: Pittsburgh PA
Posts: 25,748
Received 367 Likes on 296 Posts
Car: 89 Iroc-z
Engine: 555 BBC Turbo
Transmission: TH400
Axle/Gears: Strange 12 bolt 3.42
Re: Gains switching to Weld Wheels (or similar)

I think i went 13.2's on irocz wheels and went 12.9 with drag wheels and skinnies but did have abit colder air... Dropped nearly 70 lbs total. I have to search my old posts here. I cant remember my mods. I know it was in the 13.4's with intake swap on my L98 and then added rockers and pulleys and was in the 13.2's range
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Street Lethal
Power Adders
634
04-30-2019 12:14 PM
fasteddi
Power Adders
30
09-02-2015 10:29 AM
overdriv
Camaros for Sale
0
08-20-2015 03:52 PM
Dialed_In
Firebirds for Sale
2
08-20-2015 01:45 PM
Fronzizzle
Electronics
2
08-09-2015 01:15 PM


Thread Tools
Search this Thread
Quick Reply: Gains switching to Weld Wheels (or similar)



All times are GMT -5. The time now is 05:04 PM.