Kirkey pro-street seat
03-12-2014, 01:20 PM
#1
Junior Member
Thread Starter
Join Date: Jul 2003
Location: Cocoa,Fl.
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Camaro z28
Engine: 427 sb
Transmission: th400
Axle/Gears: 9"/4.30
Kirkey pro-street seat
What width size seat does everyone use? I'm upgrading my 10 pt. cage to 25.5 and still have factory interior.
03-12-2014, 02:03 PM
#2
Senior Member
iTrader: (5)
Join Date: May 2005
Location: Midwest IL
Posts: 831
Likes: 0
Received 1 Like
on
1 Post
Car: 1984 Z28
Engine: Alky 360
Transmission: TH400, Freakshow 9.5"
Axle/Gears: 9" 4.71
Re: Kirkey pro-street seat
Depends on how wide your a** is.....
FWIW, I am 6' and 185 lbs and am using a 17.5" seat.
FWIW, I am 6' and 185 lbs and am using a 17.5" seat.
03-12-2014, 11:42 PM
#3
Re: Kirkey pro-street seat
I'm 5'11 and 195lbs and I'm using the 41700(17" hip), fits awesome.
I just installed the cage in my car so I haven't driven or raced with them yet, but I have made motor sounds while sitting in the seat
Seriously, go to their site, they say how to measure your butt for the right seat.
I just installed the cage in my car so I haven't driven or raced with them yet, but I have made motor sounds while sitting in the seat
Seriously, go to their site, they say how to measure your butt for the right seat.
03-13-2014, 10:35 PM
#5
Supreme Member
iTrader: (5)
Join Date: Jan 2002
Location: Orland Park, IL
Posts: 13,619
Likes: 0
Received 3 Likes
on
3 Posts
Car: 1984 Z28
Engine: SLOW carbed ls
Transmission: TH400 with brake, 8" PTC converter
Axle/Gears: moser 9" 4.11
Re: Kirkey pro-street seat
I have a 19" in mine that was a dear friend of mines who past, chris sikora. He was very well known in the lt1 world.
03-14-2014, 09:57 AM
#6
Re: Kirkey pro-street seat
If you're going to put kirkey's into a 3rd gen for the driver seat, use this! I did.
http://www.racecraft.com/index.php?m...roducts_id=249
As for the passenger side( if you're putting in a kirkey there), don't use this!
http://www.racecraft.com/index.php?m...roducts_id=250
It doesn't work.
I did this for the passenger
Then drilled holes in the back, put some square tubing underneath it and bolted it to the stock bolts
http://www.racecraft.com/index.php?m...roducts_id=249
As for the passenger side( if you're putting in a kirkey there), don't use this!
http://www.racecraft.com/index.php?m...roducts_id=250
It doesn't work.
I did this for the passenger
Then drilled holes in the back, put some square tubing underneath it and bolted it to the stock bolts
Thread
Thread Starter
Forum
Replies
Last Post
