skunkIROC

i see some camaros with those aftermarket rear hatch louvres (the black fins going down the rear window)

does anyone know who makes/ made those? i cant seem to find them anywhere.

jimp2001

i thought those were a factory option...

I saw an aftermarket set somewhere though

skunkIROC

no idea who made it though?

does anyone have an educated guess on who MIGHT have made them? like a body company that has f-body stuff (i already tried the nine adds at the top of the page here)??????

Joey IROC

I have a set that are actually made by Cragar.

tom3

The best looking ones I've seen were the factory types. See these on Ebay and the parts ads on web sites. Be sure to get all the install fasteners though, special stuff and hard to find.

skunkIROC

i found one on ebay, but it didnt have hardware, and it looked kind of rough.

i looked on the GM website, but it doesnt look like they still make that particulat part anymore.

cragar's website only seems to have wheels.

nobody knows of any companies who still make these items?

smokefan

the only company i knew was crager also

skunkIROC

are we talking about cragar, as in the WHEEL company?

tom3

Here's a set of Cragar louvers on craigslist with a picture:

http://allentown.craigslist.org/pts/91235423.html

skunkIROC

thanx for the link. not to whine, but i'd like to hold out for a set that doesnt have the brake-light fins at the top.

i went to cragar's website and found a FAQ section that addressed the fact that they no longer make the louvers.

there HAS to be somone out there who still makes these things.

HELP?!?! ANYONE?!?!?

87IROC350

I had the same Craigar rear louvers without the third brake light. I think next to factory those are the best looking ones I have seen.

ZZ4 86 Z28

iTrader: (1)

http://store.yahoo.com/spoilers4less/wp10519.html

http://store.yahoo.com/spoilers4less...51-camaro.html

I used to know a couple more places with better looking ones, i just cant seem to find them right now. I would say go with ebay. Just wait around until a nice set goes up. You wont pay more than like 150 for an absolutely mint one.

skunkIROC

i think i'll wait for a good set on ebay for a few months, then if nothing comes up, i'll order the set on the second link from the previous relpy.

thanx again, everyone, for your input

vics88

I have cragars, but the top clip is broken on the left side and I'm looking for hardware to fix it. Any ideas? I can't seem to find anything.

ckeene502

how much are you willing to pay for one....i know where one is. i think it is a 3 piece set-up. i will go check on it tomorrow.

skunkIROC

were you talking about his hardware, or my entire louver set up (that you where to find one?)

skunkIROC

never got back to me on that 3piece set, is it still available?

ckeene502

i for got all about that its in a jy down the road. i will go check on it in a few min.

ckeene502

it has plastic side and metal center. i looked at it closer it looks all there but most of the rivits are worn out. you can pretty much lift a slat from the 2 spines.

ckeene502

k

skunkIROC

thanx for going and looking for me.

did they give you a price for it?

can i get by with the worn out rivets, or do they need to be replaced?

ckeene502

i did not get a price,,,,i guess you could get new rivits in there.

skunkIROC

you're in alabama, correct? i'm moving to SC this month, so we wouldnt be that far apart. if this yard wanted a decent price for the set (also if its in usable shape) i'd like to try and work something out.

ckeene502

i will check on the price....it will not be much.. they are pretty cheap. i will check on it monday.

keene

skunkIROC

thanx

ashkrowe

http://youngsfbody.com/inc/sdetail/14125

I've been on a hunt for rear window louvres too! Here's a site I found, hope it helps. I have two window louvres on order, one for my berlinetta and one for my bros'

ps sorry if i bumped a thread

Tank91RS

Just kind of browsed around found http://www.sfxperformance.com/parts/AST10519.htm

And the seem to offer a good deal of louvres.

modern0utlaw

Classic Industries has a selection, Metal or ABS, and 3 piece or 1 piece. Cant remember how much. I personally cant decide if i want louvers or not

t-top havoc

iTrader: (3)

In the exteroir parts for sale Roc THIS has louvers for sale !

Slash

how rare(if u wanna call it that) are the one piece rear louvers? I have a set i don't think they were factory but i could be mistaken.
-
The previous owner (in pic) had the brackets in wrong spots/spacing reason there some bumps. I've since taken it off and its sitting in my garage

Norwood

iTrader: (1)

I myself would also like to aquire a set of these beautiful and functional louvres and think they might accent my camaro nicely. They quite possibly might fit in with the theme of my car and compliment my bug shield and custom moon roof. Please someone tell me of a place where I may purchase these. Thanks in advance

sand1303

i want a set also, i am always looking around for something. jcwhitney sells them as well. i have found them on their website before.

Dabesiv

iTrader: (1)

I have a set that were purchased with the vehicle and just got repainted, but the company that made them no longer exists, although I remember finding another company that sold them for around $250-$300, if i remeber what it is ill post it.

draco

I've got a set on my Camaro, they are called Chastain Shadows. They are all metal, and three piece. I dont have a pic handy but if one turns up i'll post it.

stealthroc89

Try JcWhitney, they should have them at a good price.

Ron82ZTT

iTrader: (1)

I have a set. They are 3 pc all metal black and they are on the car so all the parts are there. Whoever wants these I'd like to trade for a good 305 starter or a distributor set up for my stock 82 motor. Write to k4rjj at comcast dot net I'm in West Georgia.

Holmes

iTrader: (4)

I found a set in a junkyard a few years back, not sure if they were original GM but at 50 dollars they were a steal and I couldn't passon them. A little sanding and some paint and they looked like new again. Even had the brackets as well.

87v6Bird

iTrader: (1)

The new louvers you can buy now are made by a company called Wilpak Industries and are sometimes sold under the Astra Hammond name.
Here's there website: http://www.willpak.com/.
From what I've seen the cheapest prices on louvers are through Amazon.com but you'll have to look up the part number you're looking for on Wilpak's site. Link to application list: http://0037a4b.netsolhost.com/wp-content/uploads/2010/02/ApplicationGuide_CarLouvers.pdf
Amazon doesn't do a good job of telling what the louvers fit. They basically just list a part number.
By getting mine from Amazon I saved $60 over JC Whitney's price and got free shipping (I have an Amazon Prime account)

87bluebird

slash are trying to sell them? if so how much?

Ron82ZTT

iTrader: (1)

I'll take $60 plus whatever shipping/packing costs at UPS Store. If you have a buddy in North Georgia that will hold them for you and pay me that would save the shipping costs. I'm taking these to the Lanier swap meet 1st Saturday of the month (sep) so claim em now. Pics as I said will be posted this weekend as soon as I can get the car photographed. They are straight and all there so claim them early if you want.

Pics

https://www.thirdgen.org/forums/album.php?albumid=3690

Ron82ZTT

iTrader: (1)

https://www.thirdgen.org/forums/album.php?albumid=3690

Bump...

$60 more than fair cash and carry. I can deliver to The UPS store after you Paypal me. You pay them to pack and ship.

Confuzed1

iTrader: (4)

I plan on getting a set of louvers over the winter, and I followed this post and looked at the links for the ones that are still available.

Looks like they are all 3 piece, which doesn't really bother me but it says the all ABS plastic ones are mounted by using double sided 3M tape?? Not sure about that. Anyone have these, or have a pic of them installed??

Otherwise, I guess I'll get the 3 piece with the aluminum center and ABS sides - I think they look pretty good.

tom3

If I may add a comment. Before spending a lot of money and time I'd recommend finding a third gen with these and looking it over first. The louvers look good from certain angles, not so good from others. I took mine off the first day I had the car. I'll keep them since they are original to the car, but can't imagine they'll ever be on it again.

87v6Bird

iTrader: (1)

They still make a one piece version it's all ABS. I have it and yes it's mounted with brackets held on by double-sided tape but the brackets also wrap around the edge of the rear window frame as well.
I've had the louvers on for about a month now and so far so good on the tape holding. Like you, I had my doubts. Once I finally get a chance to clean my car up I'll post some pictures.

Confuzed1

iTrader: (4)

That'd be great!

mh82camaro

hello, i have a set that i have had on my car for the past 5 years. i got them out of a jcwhitney catalog its made of all plastic with fasteners....not sure if they still make em thought.how do you like it on my car be honest?some people like it some don't....

Confuzed1

iTrader: (4)

I like 'em!! JC Whitney huh? I'll have to check into them then. Those are exactly the type I want. Nice ride too!! Looks a lot like mine....'cept you have nice wheels too...lol.

Speedfreak391

iTrader: (1)

I have a set of 3 piece louvers that I will sell. PM me if interested.

Ozz1967

iTrader: (4)

Do they use the doublesided tape like the one piece uses?

maule6

so i have a set of louvers from the factory. does anyone know were i can find all the mounting hardware