Justin@GMHTP

As many of you know, we try to feature as many readers rides as possible in a section of the magazine called STREET HEAT. Usually, people will email us tiny, unusable pictures but I know ThirdGen.org has some killer cars that need to be seen in our Street Heat section.

So, here are the guidelines...

Post up 1-3 Pictures of your car in regular, internet resolution.

Make sure that you have the original photograph, in HIGH RESOLUTION ready and able to be sent.
DO NOT POST THEM IN FULL RES HERE.

Include a link or brief (seriously, very very brief) mod list.

Each month we will pull some people from here (amongst other places) and get you guys into the magazine.

Please note, we will contact you before we run the story, so please don't PM me and ask if we picked you yet. We have hundreds of readers submit pictures (which is really awesome) so it takes time to go through all of them. If we like your picture/car we will get in touch with you to get more information and get your final approval to run the shot.



Lawyers note: All photos posted in this single thread are presumed to be for publication and GMHTP reserved the right to edit accompanying descriptions.


So, lets see what you got!


P.S. - Check out last months cover!

BlueZee28

iTrader: (30)

Now that's what I'm talking about!!!


I'll be able to get high res photos of my engine bay and interior this weekend, the only ones I have with the new drivetrain are with my camera phone. I'm getting the car back from the exhaust shop either tomorrow or Thursday and I'll be able to get as many pictures as need be. Besides, I hadn't finished putting loom on my harness or installed an a/c delete box yet.


Regardless, here is my 6.0L LSX/T56 powered '91 Z28 convertible. MS4 cam, LS6 intake, forged internals, Scorpion rockers, dual valve springs, tubular kmember, etc etc etc. It has a mod list a mile long, so I'll save that for if you decide to run it in the magazine :

Sickness91Z28

iTrader: (1)

Nice, very nice, what a great opportunity to get the 3rd gen F-bodies out there! Here is mine:





1991 Z28 Camaro
5.7 Tuned Port Injection
20X10 (rear) "VROD" wheels by Intro
19X8 (front) "VROD" wheels by Intro
Air Ride Technologies Ride Pro E Digital Air Ride System
2002 SS Camaro Seats
Wet NOS System
JL Audio Stereo System
Autopower Roll Bar
ASCD SS Hood
1981 Z28 Fender Vents

I have always had a soft spot for the 82-92 fbodies, probably because of growing up in the 80's and early 90's. It seems as if this generation of Camaro has been completely skipped over....and I have no idea why! I bought my car when I was 19. It was rough when I got it, dents dings, faded paint etc. I drove it everyday...to and from work and school. I saved every nickel and dime...and always thought to myself....hopefully one day, I can really make this car stand out....and make it be recognized (maybe even as recognizable as the first generation Camaros). So, after working at a grocery store for 5+ years and spending hundreds of hours on thirdgen.org, it was time to strip it down and to use the car as my template. So me and my dad did the body work and repainted the car. It looked brand new! But was it enough? Noway. So from there....I added and modified many parts of the car..and here it is...almost 8 years later...my 3rd set of wheels, brand new air ride suspension, nitrous, & new interior. What makes me feel the best about it...is that most of the work was done by me and my dad. I think it's "almost" there.

NY3RDGEN

My mods are in my sig below. Here is some pics.

Grifter757

iTrader: (5)

Here is my current setup although its about to change to a front mount turbo setup with a 408ci LS.

1987 IROC Camaro
LS1/T56 Swap, STS turbo kit with FMIC, C5 Z06 Brakes in the front, Full BMR and Spohn suspension, Covans Carbon Fiber dash with autometer gauges, lots of other little stuff.
My wife and I bought it in 2006 when i was 22 and my wife was 6 months pregnant. Drove all the way to easly South Carolina at Hawks thirdgen. The car has changed alot since then and out of the dozens of thirdgens i've had since i was 17 this one I plan to keep till I'm very old.

madbomber824

iTrader: (2)

Here is my 86' camaro. I'm 19 and this is my first car i've owned. Four buddies and I did a V6 to V8 swap while in high school. Nothing special at all but a big accomplishment in my life.

Mods: 355-flat top pistons, Shaved + ported heads, decked block = 350+ hp
built 700r4 w/ shiftkit
Magnaflow exhaust
New Paint
Limited-Slip Rear- 3.73 gears

Here is link:
https://www.thirdgen.org/forums/album.php?albumid=1654

AC

iTrader: (3)

Had this Z28 since 2001 when I bought it with 19,xxx miles. Now has 46,xxx miles. I just finished my 3rd engine and will be taking some pics soon.

Modifications are in my signature.

the swede

A white iroc-z from Sweden

Camaro iroc-z 1989 made fore European market . Low milage since new . Paint,interior is stock since new and look like it just left the assembly line .

Mods: Iroc rims in crome 18x8 in front 9x20 in rear. eibach sportline , Koni 3 way red shocks . ACSD hood , Hawks 5" spoiler , Homemade chip ,megashifter, Stereo sytem i coverd up in the car . and more .....

I also have many pics of the car , different mods in progress and from different years . Work as freelance journalist and my specality is car magazines .

FSTFBDY

iTrader: (33)

Ton more pic's if needed..

92 Vert | 383 LT1 , Ported heads | Callies crank & rods | JE Pistons | Novi 2000 supercharger | 125 Shot Nitrous | SLP Headers | Alloy Engineering Strut Mounts | spohon adj. trq arm & T56 cross member | 9bolt with 3.45's

Orr89RocZ

iTrader: (20)

My 1989 Camaro IROC-Z

Mods: To be brief... Twin Turbo 401 cubic inch sbc. Dart block, AFR heads, 60mm turbos, TH400, stock 2.73 rear end

9 second pump gas street car... 9.86 at 140.98 mph on 14psi off the footbrake

KCobain147

Mods:

Engine:
160 degree t-stat
High Amp Alternator
Optima Yellow Top Battery
Valve Covers Painted Body Color
14x3 drop base K&N air filter

Suspension:
Eibach Sportline Lowering Springs
Spohn Wonderbar
Spohn Panhard Bar
Spohn Front Sway Bar
Bilstein HD Rear Shocks
Boyd Coddington Wheels - 18x8 fronts, 18x10 rears
Kuhmo Ecsta Tires - 245/40/18 fronts, 275/35/18 rears

Appearance:
Stock color paint, heritage stripes ghosted under the clear coat
Replaced stock RS grill with stock Z28 grille
5% Limo tint on the rear, 35% tint on the sides
Street Glow Gold Green underbody neon kit
White face reverse indiglo gauges
Arizen Racing Seats - Black w/grey suede - custom stitching in the headrests

Audio:
Eclipse Model CD 3422
Eclipse 3 way 6x9 Model 83941
Eclipse Model 33250 2 way 600 watt amp
Eclipse Model PA 5422 4 Channel Amp
Eclipse Dual Voice Coil Model 86120.4 DVC 12" Subs
All Cables Monster Cable
Viper Alarm, Transponder System with additional horn and motion sensor

More pics of the interior are posted in a diff thread: https://www.thirdgen.org/forums/inte...-thoughts.html

one92rs

iTrader: (5)

1992 rs camaro-305-700r4-3.23-carb-edelbrock-procomp-accel-hooker-magnaflow-4th gen fans-4th gen seats-b4c police suspension-polished factory rims.

TPI TERR

iTrader: (9)

can i come out in it again? jk

ill have to post some pics of z28fast1

Sinister Z

Car Specifications & Mod List!

383 C.I. Stroker...6.3 Litre, 515 H.P.

4th GEN. Camaro Leather Seats.
AUBURN PRO: Posi & Carrier Unit.
AUTO METER: Ultra-Lite Gauges "Complete"
B&M: Ratchet Shifter.
BORLA: Stainless Steel Exhaust.
BOZE: Forged Billet Wheels "Octane" 18X8 & 18X10
COMP CAMS: Solid Roller (XR286R-248/254 dur. 576-582 lift).
CUSTOM: Billet Engraved with L.E.D.'s Stereo Face Plate.
CUSTOM: Embroidering on Headrests "Camaro Logo"
CUSTOM: Leather Interior.
CUSTOM: Hockey Stripes with "383" Flag Badges.
CUSTOM: Billet IROC-Z/Z-28 Badges.
CUSTOM: 3 Point Strut Tower Brace.
DEMON: "Mighty" 750 Double Pumper Carburator.
EDELBROCK: Performer R.P.M. Heads 2.02 "Ported & Polished"
EDELBROCK: Victor JR. Intake Manifold "Endurashine"
EIBACH: Sportline Springs.
J&M: Billet Caster/Camber Plates.
KVR: Cross Drilled Rotors.
KYB: Shocks & Struts.
MARCH: Billet Alternator.
MARCH: Billet Brackets.
MSD: 6-AL Box.
MSD: Billet Distributor.
OPTIMA: Yellow Top Battery. "In the Rear"
PAINT: 2005 Ferrari Modena Yellow.
SLP: 1 3/4 Ceramic Coated Headers.
SPAGHETTI ENGINEERING: Digital Sequential L.E.D. Tail Lights.
SSBC: Billet Master Cylinder.
TOYO: Proxes T1-R's Tires.
XENON: H.I.D. Projector & Halogen Headlights.

ssean92

iTrader: (10)

lt1 (383) T56 450 HP/495 @ wheel, 4th gen rear swap, 4th gen interior swap, Ls1 front brake upgrade, ZR1 9.5 wheels, manual sterring. That is the basic's on the car.

92ZZ3RS

iTrader: (2)

https://www.thirdgen.org/forums/album.php?albumid=2038
LS1/T56, centerline wheels, Vengnance Racing cam, T.E.A. LS6 stage 2 heads, nitro dave's nitrous kit, moser 9" rear, bmr adjustable torque arm, lakewood control arms, shocks and struts, borla exhaust. made 426 rwhp and 406 rwtq on motor.

88FormulaKiller

iTrader: (8)

nice car buddy!


1991 1LE 46K miles, 383 forged Eagle rotating assembly, Procharger P1SC, Dart Pro1 alum heads, 64cc/200cc,Harland Sharp 1.5 RR's, Comp Cam (Duration I:.520/E:.540 Lift I:236/E:248 113LSA), MSD 8336 Distributor, MSD 6+ Digital spark box, Holley HSR, 60# injectors, Hooker 2210's, Mufflex 4" catback,58mm BBK TB, Tremek TKO600, Spec Stage 3 clutch, Strange 12bolt w/3.73 gears, Spohn SFC,Spohn solid rear swaybar, Spohn LCA's, Spohn Adjustable TA, Denny's Nitrous Ready Driveshaft, $59 code, custom tune.
327rwhp / 485ft-lbs @5PSI boost. Both numbers having the timing 12 degrees retarded from where the timing needed to be. Re-dyno soon.

TurbomanKnight

I'm posting this for a friend who cant do it right now. His name is "charged350" on this board.

87 IROC-Z

Custom Forged 355 / Solid roller cam/valvetrain / Victor Jr heads /Holley 800 cfm DP / 7.5:1 CR / 3500 Stall / Stage 3 700R4 / LS1 Driveshaft / Full UMI Tubular Rear Suspension / Moser/Strange 9" / 4:11 gears Detroit Locker / Sumped LS1 gas tank / A1000 Fuel pump / A1000 FPR / Paxton Fuel filter / -10 Fuel line -8 return / Borg Warner S475 Turbo / JGS 50mm WG & 56mm BOV / PA Racing Complete Tubular Front End Kit With Coilovers / Full Autometer Dash /

Photos are by Steven Ferrara.

C-Titan

iTrader: (2)

Mod List and More Pictures can be found here:

https://www.thirdgen.org/forums/album.php?albumid=666

Been a fan of GM High Tech for as long as I can remember... It is a dream come true for us to be able to show the rest of the world the hard work we put into our vehicles... Thank You for the opportunity...

IROCThe5.7L

AFR 195cc Eliminator Series heads
Comp Cam
Holley Stealth Ram Intake
30lb Injectors
Full Exhaust
Spohn Suspension

Charged350

iTrader: (1)

That's my blue turbo beast thanx for postin it for me sam, my laptop fried.

jensen73110

iTrader: (4)

Some really sweet rides in here, but I'm pretty sure the carb cars are ineligible. I've never seen a carb under the hood of anything in GMHTP. Hence the High Tech part: EFI.

(mine is ineligible due to the Performance part )

John in RI

iTrader: (167)

Why not,.......

Modified:
84 Camaro Berlinetta, 355ci, T56, 3.70 POSI BW with PBR.

1985blktransam

iTrader: (1)

1985 Pontiac Firebird Trans Am w/T-Tops

Engine:
5.0 Liter V8 with 4 Barrel Quadrajet
K&N air filter

Interior:
Stock
Upgraded Dome light to T-Top Roof Console

Suspension:
GM Shocks/Struts
GM Springs
Energy Suspension sway Bar bushings and Links
New NOS Slotted Wheels
GM Brakes and Rotors

Appearance:
Stock

Audio:
GM Touch Control AM/FM Cassette Deck.
New GM Speakers
Viper Alarm System

Slight Mods:

Larger Exhaust System. System Resembles Stock.
Rear Hatchback Window Tinted

whitedevilTA

iTrader: (8)

Have you ever been down to Northern CT for any car shows? Your car looks very familiar. I'm almost positive I've seen it in person.

Randy92Z

iTrader: (3)

92 Z28 convertable, 500 hp Miniram'ed 383, T56, longtubes and 4" Mufflex

BigBadGTA

1988 Pontiac Trans Am GTA, 5.7L 350 TPI. Goodyear Eagle GS-D3 tires, Hypertech performance chip, K&N cone filter. 81,000 miles on her, the exhaust is even still all original. Im 17 and this is my first car. Had her for almost a year and a half already. My baby.

JSACRA

iTrader: (2)

mods
3.73 ring and pinion
edelbrock headers
jet stage 2 chips
jet fan switch
b&m tranny cooler..with hydralic lines not standard rubber
tci tranny servo

//<86TA>\\

iTrader: (14)

makes me wish i had time this summer to get some new pics

grover85

iTrader: (1)

I am sure I don't have a chance but hey.
1986 Iroc
406 TPI
150 shot
6 point cage
T56

AC

iTrader: (3)

tortuga7708

tortuga7708

88_thirdgen

mods are: 2007 c6 OEM corvette rims , eibach lowering springs , msd ignition, 8000k hids, flowmaster exhaust, re done custom interior, sound system

speedemon88

iTrader: (3)

12bolt moser 4.11 gears, 33spline gears, spintech 3.5in exhaust, hooker full length headers, built 700r4, work in progress

Black_Knight

Your car looks VERY much like I want my 1985 Trans Am to look like when I'm finished building it up. Right now it looks like junk yard leftovers, but it won't for too long I hope. I will have the spoiler on mine and my exhaust tips won't show like that. I'll also probably put the side molding back along the doors. I think it looks better. Though I'm probably in the minority on that. Right now I'm stripping the car down to just a rolling chassis to get the body work done and then painted. After that's all done I can start the engine work, and then rebuild the suspension. Once all that's done I'll tackle the interior.

miner

Just basic head porting and exhuast 305 built .30 over with t56 and 4th gen rear end.

NY3RDGEN

Thanx for the compliment..
I also have a Hawks firberglass repro Aerowing ready for prep n paint. Should be on this spring. Then the tails wont look so radical. Ive just always wanted big slashcut SS tips. So i did. Its actually a Borla adjustable catback, cant tell be looking at it though.

ES87iroc

Wow, there are some amazing cars in this post. I am not sure if mine is in the same class, but here is my thirdgen. I bought it back in early 2000 with a blown motor; it was in pretty sad shape and probably headed for the scrapper. It took a good bit of work to get it streetable again. I daily drove it for about 4 or so years while slowly bringing it back to it's former glory. A friend and I did a complete tear down/repaint back in 2004 when it was retired from daily driver status. I am currently working on an LT1/T56 swap along with a 4th gen LT1 dash conversion. As pictured it has:

l98 with misc bolt ons/t5/4th gen 3.42p ls1 spec rear/ls1 style front brakes/camaro ss wheels/cervini's 3" hood/91 camaro GFX/91 Z28 spoiler/99 TA seats & console

Yahtzee

My 1989 IROCZ Camaro
5.7L TPI, BBK Throttle body, Hooker Cat-back.
T-56, Ram clutch, spohn torque arm.
4th Gen interior
ZO6 Motorsport wheels (currently)

Black_Knight

Your wheel choice is exactly what I want to go with. I also have a TPI system that has some damage to the finish, and I wondered what it would look like painted black. After seeing the pictures taken under your hood, I now know. How much boost are you running on that Procharger?

Yahtzee

Im in love!!! What size tires are you running?

92_T-5

iTrader: (1)

this is mah brothers 89 tpi iroc 1LE that mah dad painted and fixed

92_T-5

iTrader: (1)

This is my brothers other 92 tbi rs




This is my 92 T5 rs

Richard_Strahl

iTrader: (1)

This is my '86 Trans AM. It's a bit odd, I ended up buying a '92 Firebird for a parts car and ended up switching out the water damaged TA Taillights with the Firebird's. Did a bit of tweeking with the wireing so that the signals light up with the breaklights, but still blink like they're suppose to
Here's a pic of it this past summer, after the parts and interior conversion:




And here are some pics I took of it about an hour ago, I just added some decals to it yesterday. It's snowing, so it was hard to get decent pics =/








As far as a Mod list goes, it's not much, but:
Custom Crimson Metallic paint [Credited to my Dad]
Torq Thrust polished aluminium mags, 16x8 front 17x10 rear
'92 Firebird Interior, Black
'92 Firebird Taillights
Custom Taillight Wireing

okfoz

My 1987 Formula,
Mods:
-Converted from 4BBL to TPI,
-SLP 1.75" Headers, & Cat-Back
-Custom PROM
-Custom interior
-SLP Cam
-17" ROH ZS Rims, Yokohama ES100 Tires
- Best 1/4 Mile 14.8 sec

okfoz

And a real deal ASC Formula 350 Convertible 1 of 42, "The car that does not exist"
A true survivor, original paint, unmodified.

scottmoyer

Mods: NONE

deadhead1882

my car is ugly but puts down good numbers, i just wanna recommend the guy in sweden

sjgrimsley

1982 Trans Am (Viper GTS red )
305 with Q-Jet from '85 T/A
TH-700R4 from '85 T/A
275/40ZR18 tires around C5 Z06 wheels
Stock int. except for 1985 T/A shifter, 4th gen seats and seat belts, and small sound system