GM HIGH TECH is looking for YOU!!
#1
GM HIGH TECH is looking for YOU!!
As many of you know, we try to feature as many readers rides as possible in a section of the magazine called STREET HEAT. Usually, people will email us tiny, unusable pictures but I know ThirdGen.org has some killer cars that need to be seen in our Street Heat section.
So, here are the guidelines...
Post up 1-3 Pictures of your car in regular, internet resolution.
Make sure that you have the original photograph, in HIGH RESOLUTION ready and able to be sent.
DO NOT POST THEM IN FULL RES HERE.
Include a link or brief (seriously, very very brief) mod list.
Each month we will pull some people from here (amongst other places) and get you guys into the magazine.
Please note, we will contact you before we run the story, so please don't PM me and ask if we picked you yet. We have hundreds of readers submit pictures (which is really awesome) so it takes time to go through all of them. If we like your picture/car we will get in touch with you to get more information and get your final approval to run the shot.
Lawyers note: All photos posted in this single thread are presumed to be for publication and GMHTP reserved the right to edit accompanying descriptions.
So, lets see what you got!
P.S. - Check out last months cover!
So, here are the guidelines...
Post up 1-3 Pictures of your car in regular, internet resolution.
Make sure that you have the original photograph, in HIGH RESOLUTION ready and able to be sent.
DO NOT POST THEM IN FULL RES HERE.
Include a link or brief (seriously, very very brief) mod list.
Each month we will pull some people from here (amongst other places) and get you guys into the magazine.
Please note, we will contact you before we run the story, so please don't PM me and ask if we picked you yet. We have hundreds of readers submit pictures (which is really awesome) so it takes time to go through all of them. If we like your picture/car we will get in touch with you to get more information and get your final approval to run the shot.
Lawyers note: All photos posted in this single thread are presumed to be for publication and GMHTP reserved the right to edit accompanying descriptions.
So, lets see what you got!
P.S. - Check out last months cover!
#2
Supreme Member
iTrader: (30)
Join Date: Sep 2005
Location: O'Fallon, MO
Posts: 6,258
Likes: 0
Received 4 Likes
on
4 Posts
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
Re: GM HIGH TECH is looking for YOU!!
Now that's what I'm talking about!!!
I'll be able to get high res photos of my engine bay and interior this weekend, the only ones I have with the new drivetrain are with my camera phone. I'm getting the car back from the exhaust shop either tomorrow or Thursday and I'll be able to get as many pictures as need be. Besides, I hadn't finished putting loom on my harness or installed an a/c delete box yet.
Regardless, here is my 6.0L LSX/T56 powered '91 Z28 convertible. MS4 cam, LS6 intake, forged internals, Scorpion rockers, dual valve springs, tubular kmember, etc etc etc. It has a mod list a mile long, so I'll save that for if you decide to run it in the magazine :
I'll be able to get high res photos of my engine bay and interior this weekend, the only ones I have with the new drivetrain are with my camera phone. I'm getting the car back from the exhaust shop either tomorrow or Thursday and I'll be able to get as many pictures as need be. Besides, I hadn't finished putting loom on my harness or installed an a/c delete box yet.
Regardless, here is my 6.0L LSX/T56 powered '91 Z28 convertible. MS4 cam, LS6 intake, forged internals, Scorpion rockers, dual valve springs, tubular kmember, etc etc etc. It has a mod list a mile long, so I'll save that for if you decide to run it in the magazine :
Last edited by BlueZee28; 01-05-2010 at 04:24 PM.
#3
Supreme Member
iTrader: (1)
Join Date: Mar 2001
Location: Chesterfield, Indiana
Posts: 4,226
Likes: 0
Received 5 Likes
on
4 Posts
Car: 1991 Z28 Camaro
Engine: 5.7
Transmission: Jasper 700R4 Stage II
Axle/Gears: 3.23 For Now
Re: GM HIGH TECH is looking for YOU!!
Nice, very nice, what a great opportunity to get the 3rd gen F-bodies out there! Here is mine:
1991 Z28 Camaro
5.7 Tuned Port Injection
20X10 (rear) "VROD" wheels by Intro
19X8 (front) "VROD" wheels by Intro
Air Ride Technologies Ride Pro E Digital Air Ride System
2002 SS Camaro Seats
Wet NOS System
JL Audio Stereo System
Autopower Roll Bar
ASCD SS Hood
1981 Z28 Fender Vents
I have always had a soft spot for the 82-92 fbodies, probably because of growing up in the 80's and early 90's. It seems as if this generation of Camaro has been completely skipped over....and I have no idea why! I bought my car when I was 19. It was rough when I got it, dents dings, faded paint etc. I drove it everyday...to and from work and school. I saved every nickel and dime...and always thought to myself....hopefully one day, I can really make this car stand out....and make it be recognized (maybe even as recognizable as the first generation Camaros). So, after working at a grocery store for 5+ years and spending hundreds of hours on thirdgen.org, it was time to strip it down and to use the car as my template. So me and my dad did the body work and repainted the car. It looked brand new! But was it enough? Noway. So from there....I added and modified many parts of the car..and here it is...almost 8 years later...my 3rd set of wheels, brand new air ride suspension, nitrous, & new interior. What makes me feel the best about it...is that most of the work was done by me and my dad. I think it's "almost" there.
1991 Z28 Camaro
5.7 Tuned Port Injection
20X10 (rear) "VROD" wheels by Intro
19X8 (front) "VROD" wheels by Intro
Air Ride Technologies Ride Pro E Digital Air Ride System
2002 SS Camaro Seats
Wet NOS System
JL Audio Stereo System
Autopower Roll Bar
ASCD SS Hood
1981 Z28 Fender Vents
I have always had a soft spot for the 82-92 fbodies, probably because of growing up in the 80's and early 90's. It seems as if this generation of Camaro has been completely skipped over....and I have no idea why! I bought my car when I was 19. It was rough when I got it, dents dings, faded paint etc. I drove it everyday...to and from work and school. I saved every nickel and dime...and always thought to myself....hopefully one day, I can really make this car stand out....and make it be recognized (maybe even as recognizable as the first generation Camaros). So, after working at a grocery store for 5+ years and spending hundreds of hours on thirdgen.org, it was time to strip it down and to use the car as my template. So me and my dad did the body work and repainted the car. It looked brand new! But was it enough? Noway. So from there....I added and modified many parts of the car..and here it is...almost 8 years later...my 3rd set of wheels, brand new air ride suspension, nitrous, & new interior. What makes me feel the best about it...is that most of the work was done by me and my dad. I think it's "almost" there.
Last edited by Sickness91Z28; 01-05-2010 at 11:45 AM.
#5
Member
iTrader: (5)
Join Date: Apr 2004
Location: Va beach
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC,
Engine: 370 LSx With Boost
Transmission: 4L80E
Axle/Gears: S-60 with 3.50s
Re: GM HIGH TECH is looking for YOU!!
Here is my current setup although its about to change to a front mount turbo setup with a 408ci LS.
1987 IROC Camaro
LS1/T56 Swap, STS turbo kit with FMIC, C5 Z06 Brakes in the front, Full BMR and Spohn suspension, Covans Carbon Fiber dash with autometer gauges, lots of other little stuff.
My wife and I bought it in 2006 when i was 22 and my wife was 6 months pregnant. Drove all the way to easly South Carolina at Hawks thirdgen. The car has changed alot since then and out of the dozens of thirdgens i've had since i was 17 this one I plan to keep till I'm very old.
1987 IROC Camaro
LS1/T56 Swap, STS turbo kit with FMIC, C5 Z06 Brakes in the front, Full BMR and Spohn suspension, Covans Carbon Fiber dash with autometer gauges, lots of other little stuff.
My wife and I bought it in 2006 when i was 22 and my wife was 6 months pregnant. Drove all the way to easly South Carolina at Hawks thirdgen. The car has changed alot since then and out of the dozens of thirdgens i've had since i was 17 this one I plan to keep till I'm very old.
Last edited by Grifter757; 01-05-2010 at 11:59 AM.
#6
Member
iTrader: (2)
Join Date: May 2009
Location: Shawano, WI
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Camaro
Engine: 350-Carb
Transmission: 700-R4
Re: GM HIGH TECH is looking for YOU!!
Here is my 86' camaro. I'm 19 and this is my first car i've owned. Four buddies and I did a V6 to V8 swap while in high school. Nothing special at all but a big accomplishment in my life.
Mods: 355-flat top pistons, Shaved + ported heads, decked block = 350+ hp
built 700r4 w/ shiftkit
Magnaflow exhaust
New Paint
Limited-Slip Rear- 3.73 gears
Here is link:
https://www.thirdgen.org/forums/album.php?albumid=1654
Mods: 355-flat top pistons, Shaved + ported heads, decked block = 350+ hp
built 700r4 w/ shiftkit
Magnaflow exhaust
New Paint
Limited-Slip Rear- 3.73 gears
Here is link:
https://www.thirdgen.org/forums/album.php?albumid=1654
Last edited by madbomber824; 01-05-2010 at 12:51 PM.
#7
Supreme Member
iTrader: (3)
Join Date: Jun 2000
Location: CT
Posts: 1,680
Likes: 0
Received 2 Likes
on
2 Posts
Car: Used to drive a camaro
Re: GM HIGH TECH is looking for YOU!!
Had this Z28 since 2001 when I bought it with 19,xxx miles. Now has 46,xxx miles. I just finished my 3rd engine and will be taking some pics soon.
Modifications are in my signature.
Modifications are in my signature.
Trending Topics
#8
Member
Join Date: Oct 2001
Location: Umeå Sweden
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
Car: Iroc-z
Engine: 350 TPI
Transmission: 700R4
Re: GM HIGH TECH is looking for YOU!!
A white iroc-z from Sweden
Camaro iroc-z 1989 made fore European market . Low milage since new . Paint,interior is stock since new and look like it just left the assembly line .
Mods: Iroc rims in crome 18x8 in front 9x20 in rear. eibach sportline , Koni 3 way red shocks . ACSD hood , Hawks 5" spoiler , Homemade chip ,megashifter, Stereo sytem i coverd up in the car . and more .....
I also have many pics of the car , different mods in progress and from different years . Work as freelance journalist and my specality is car magazines .
#9
Supreme Member
iTrader: (33)
Join Date: Jul 2000
Location: Boosted Land
Posts: 5,945
Likes: 0
Received 1 Like
on
1 Post
Car: 92 Z28
Engine: Boosted LSX
Re: GM HIGH TECH is looking for YOU!!
Ton more pic's if needed..
92 Vert | 383 LT1 , Ported heads | Callies crank & rods | JE Pistons | Novi 2000 supercharger | 125 Shot Nitrous | SLP Headers | Alloy Engineering Strut Mounts | spohon adj. trq arm & T56 cross member | 9bolt with 3.45's
#11
Senior Member
Join Date: Dec 2001
Location: Cheektowaga., NY, USA
Posts: 862
Likes: 0
Received 3 Likes
on
2 Posts
Car: 91 Camaro RS
Engine: 305 TBI LO3
Re: GM HIGH TECH is looking for YOU!!
Mods:
Engine:
160 degree t-stat
High Amp Alternator
Optima Yellow Top Battery
Valve Covers Painted Body Color
14x3 drop base K&N air filter
Suspension:
Eibach Sportline Lowering Springs
Spohn Wonderbar
Spohn Panhard Bar
Spohn Front Sway Bar
Bilstein HD Rear Shocks
Boyd Coddington Wheels - 18x8 fronts, 18x10 rears
Kuhmo Ecsta Tires - 245/40/18 fronts, 275/35/18 rears
Appearance:
Stock color paint, heritage stripes ghosted under the clear coat
Replaced stock RS grill with stock Z28 grille
5% Limo tint on the rear, 35% tint on the sides
Street Glow Gold Green underbody neon kit
White face reverse indiglo gauges
Arizen Racing Seats - Black w/grey suede - custom stitching in the headrests
Audio:
Eclipse Model CD 3422
Eclipse 3 way 6x9 Model 83941
Eclipse Model 33250 2 way 600 watt amp
Eclipse Model PA 5422 4 Channel Amp
Eclipse Dual Voice Coil Model 86120.4 DVC 12" Subs
All Cables Monster Cable
Viper Alarm, Transponder System with additional horn and motion sensor
More pics of the interior are posted in a diff thread: https://www.thirdgen.org/forums/inte...-thoughts.html
Engine:
160 degree t-stat
High Amp Alternator
Optima Yellow Top Battery
Valve Covers Painted Body Color
14x3 drop base K&N air filter
Suspension:
Eibach Sportline Lowering Springs
Spohn Wonderbar
Spohn Panhard Bar
Spohn Front Sway Bar
Bilstein HD Rear Shocks
Boyd Coddington Wheels - 18x8 fronts, 18x10 rears
Kuhmo Ecsta Tires - 245/40/18 fronts, 275/35/18 rears
Appearance:
Stock color paint, heritage stripes ghosted under the clear coat
Replaced stock RS grill with stock Z28 grille
5% Limo tint on the rear, 35% tint on the sides
Street Glow Gold Green underbody neon kit
White face reverse indiglo gauges
Arizen Racing Seats - Black w/grey suede - custom stitching in the headrests
Audio:
Eclipse Model CD 3422
Eclipse 3 way 6x9 Model 83941
Eclipse Model 33250 2 way 600 watt amp
Eclipse Model PA 5422 4 Channel Amp
Eclipse Dual Voice Coil Model 86120.4 DVC 12" Subs
All Cables Monster Cable
Viper Alarm, Transponder System with additional horn and motion sensor
More pics of the interior are posted in a diff thread: https://www.thirdgen.org/forums/inte...-thoughts.html
#12
Supreme Member
iTrader: (5)
Join Date: Jan 2009
Location: league city
Posts: 2,928
Likes: 0
Received 3 Likes
on
3 Posts
Car: SOLD!!!!!
Re: GM HIGH TECH is looking for YOU!!
1992 rs camaro-305-700r4-3.23-carb-edelbrock-procomp-accel-hooker-magnaflow-4th gen fans-4th gen seats-b4c police suspension-polished factory rims.
#14
Senior Member
Join Date: Jul 2003
Location: Toronto, On.
Posts: 568
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1985 IROC-Z / Z-28
Engine: 383 C.I. Stroked 6.3 Litre
Transmission: 700R-4
Axle/Gears: 3:73 Posi
Re: GM HIGH TECH is looking for YOU!!
Car Specifications & Mod List!
383 C.I. Stroker...6.3 Litre, 515 H.P.
4th GEN. Camaro Leather Seats.
AUBURN PRO: Posi & Carrier Unit.
AUTO METER: Ultra-Lite Gauges "Complete"
B&M: Ratchet Shifter.
BORLA: Stainless Steel Exhaust.
BOZE: Forged Billet Wheels "Octane" 18X8 & 18X10
COMP CAMS: Solid Roller (XR286R-248/254 dur. 576-582 lift).
CUSTOM: Billet Engraved with L.E.D.'s Stereo Face Plate.
CUSTOM: Embroidering on Headrests "Camaro Logo"
CUSTOM: Leather Interior.
CUSTOM: Hockey Stripes with "383" Flag Badges.
CUSTOM: Billet IROC-Z/Z-28 Badges.
CUSTOM: 3 Point Strut Tower Brace.
DEMON: "Mighty" 750 Double Pumper Carburator.
EDELBROCK: Performer R.P.M. Heads 2.02 "Ported & Polished"
EDELBROCK: Victor JR. Intake Manifold "Endurashine"
EIBACH: Sportline Springs.
J&M: Billet Caster/Camber Plates.
KVR: Cross Drilled Rotors.
KYB: Shocks & Struts.
MARCH: Billet Alternator.
MARCH: Billet Brackets.
MSD: 6-AL Box.
MSD: Billet Distributor.
OPTIMA: Yellow Top Battery. "In the Rear"
PAINT: 2005 Ferrari Modena Yellow.
SLP: 1 3/4 Ceramic Coated Headers.
SPAGHETTI ENGINEERING: Digital Sequential L.E.D. Tail Lights.
SSBC: Billet Master Cylinder.
TOYO: Proxes T1-R's Tires.
XENON: H.I.D. Projector & Halogen Headlights.
#15
Supreme Member
iTrader: (10)
Join Date: Sep 2002
Location: Ga.
Posts: 2,113
Likes: 0
Received 0 Likes
on
0 Posts
Car: sold
Re: GM HIGH TECH is looking for YOU!!
lt1 (383) T56 450 HP/495 @ wheel, 4th gen rear swap, 4th gen interior swap, Ls1 front brake upgrade, ZR1 9.5 wheels, manual sterring. That is the basic's on the car.
Last edited by ssean92; 01-05-2010 at 08:47 PM.
#16
Member
iTrader: (2)
Join Date: Nov 2006
Location: decatur, AL
Posts: 116
Likes: 0
Received 1 Like
on
1 Post
Car: 92 camaro rs
Engine: LS1, 426 rwhp 406 rwtq
Transmission: T56
Axle/Gears: 9" with 3.70's
Re: GM HIGH TECH is looking for YOU!!
https://www.thirdgen.org/forums/album.php?albumid=2038
LS1/T56, centerline wheels, Vengnance Racing cam, T.E.A. LS6 stage 2 heads, nitro dave's nitrous kit, moser 9" rear, bmr adjustable torque arm, lakewood control arms, shocks and struts, borla exhaust. made 426 rwhp and 406 rwtq on motor.
LS1/T56, centerline wheels, Vengnance Racing cam, T.E.A. LS6 stage 2 heads, nitro dave's nitrous kit, moser 9" rear, bmr adjustable torque arm, lakewood control arms, shocks and struts, borla exhaust. made 426 rwhp and 406 rwtq on motor.
Last edited by 92ZZ3RS; 01-05-2010 at 09:39 PM.
#17
Senior Member
iTrader: (8)
Join Date: Mar 2008
Location: NH
Posts: 655
Likes: 0
Received 2 Likes
on
1 Post
Car: 1967 Firebird P.T.
Engine: LS3 4" Strkr 422ci
Transmission: MN12 6 speed
Axle/Gears: 3.73 8.5" 10 Bolt Eaton
Re: GM HIGH TECH is looking for YOU!!
nice car buddy!
1991 1LE 46K miles, 383 forged Eagle rotating assembly, Procharger P1SC, Dart Pro1 alum heads, 64cc/200cc,Harland Sharp 1.5 RR's, Comp Cam (Duration I:.520/E:.540 Lift I:236/E:248 113LSA), MSD 8336 Distributor, MSD 6+ Digital spark box, Holley HSR, 60# injectors, Hooker 2210's, Mufflex 4" catback,58mm BBK TB, Tremek TKO600, Spec Stage 3 clutch, Strange 12bolt w/3.73 gears, Spohn SFC,Spohn solid rear swaybar, Spohn LCA's, Spohn Adjustable TA, Denny's Nitrous Ready Driveshaft, $59 code, custom tune.
327rwhp / 485ft-lbs @5PSI boost. Both numbers having the timing 12 degrees retarded from where the timing needed to be. Re-dyno soon.
1991 1LE 46K miles, 383 forged Eagle rotating assembly, Procharger P1SC, Dart Pro1 alum heads, 64cc/200cc,Harland Sharp 1.5 RR's, Comp Cam (Duration I:.520/E:.540 Lift I:236/E:248 113LSA), MSD 8336 Distributor, MSD 6+ Digital spark box, Holley HSR, 60# injectors, Hooker 2210's, Mufflex 4" catback,58mm BBK TB, Tremek TKO600, Spec Stage 3 clutch, Strange 12bolt w/3.73 gears, Spohn SFC,Spohn solid rear swaybar, Spohn LCA's, Spohn Adjustable TA, Denny's Nitrous Ready Driveshaft, $59 code, custom tune.
327rwhp / 485ft-lbs @5PSI boost. Both numbers having the timing 12 degrees retarded from where the timing needed to be. Re-dyno soon.
#18
Senior Member
Join Date: Oct 2005
Location: Brooklyn, NY 11208
Posts: 593
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1983 Recaro T/A
Engine: L69
Transmission: MM5
Axle/Gears: 3:73
Re: GM HIGH TECH is looking for YOU!!
I'm posting this for a friend who cant do it right now. His name is "charged350" on this board.
87 IROC-Z
Custom Forged 355 / Solid roller cam/valvetrain / Victor Jr heads /Holley 800 cfm DP / 7.5:1 CR / 3500 Stall / Stage 3 700R4 / LS1 Driveshaft / Full UMI Tubular Rear Suspension / Moser/Strange 9" / 4:11 gears Detroit Locker / Sumped LS1 gas tank / A1000 Fuel pump / A1000 FPR / Paxton Fuel filter / -10 Fuel line -8 return / Borg Warner S475 Turbo / JGS 50mm WG & 56mm BOV / PA Racing Complete Tubular Front End Kit With Coilovers / Full Autometer Dash /
Photos are by Steven Ferrara.
87 IROC-Z
Custom Forged 355 / Solid roller cam/valvetrain / Victor Jr heads /Holley 800 cfm DP / 7.5:1 CR / 3500 Stall / Stage 3 700R4 / LS1 Driveshaft / Full UMI Tubular Rear Suspension / Moser/Strange 9" / 4:11 gears Detroit Locker / Sumped LS1 gas tank / A1000 Fuel pump / A1000 FPR / Paxton Fuel filter / -10 Fuel line -8 return / Borg Warner S475 Turbo / JGS 50mm WG & 56mm BOV / PA Racing Complete Tubular Front End Kit With Coilovers / Full Autometer Dash /
Photos are by Steven Ferrara.
Last edited by TurbomanKnight; 01-06-2010 at 01:00 PM.
#19
Member
iTrader: (2)
Join Date: Aug 2006
Location: Collegeville PA
Posts: 443
Likes: 0
Received 2 Likes
on
2 Posts
Car: 91 Z-28
Engine: 360TPI
Transmission: PA Racing 700r4
Axle/Gears: 3:73
Re: GM HIGH TECH is looking for YOU!!
Mod List and More Pictures can be found here:
https://www.thirdgen.org/forums/album.php?albumid=666
Been a fan of GM High Tech for as long as I can remember... It is a dream come true for us to be able to show the rest of the world the hard work we put into our vehicles... Thank You for the opportunity...
Last edited by C-Titan; 01-26-2010 at 10:15 PM. Reason: Added New Pic
#20
Moderator
Re: GM HIGH TECH is looking for YOU!!
Post up 1-3 Pictures of your car in regular, internet resolution.
Include a link or brief (seriously, very very brief) mod list.
Comp Cam
Holley Stealth Ram Intake
30lb Injectors
Full Exhaust
Spohn Suspension
Last edited by IROCThe5.7L; 01-21-2010 at 07:54 AM.
#21
Supreme Member
iTrader: (1)
Join Date: Dec 2003
Location: Queens, NY
Posts: 1,342
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC Z28
Engine: Custom Forged 355
Transmission: 700R4
Axle/Gears: 9" 4:11's Detroit Locker
Re: GM HIGH TECH is looking for YOU!!
That's my blue turbo beast thanx for postin it for me sam, my laptop fried.
#24
Member
iTrader: (1)
Re: GM HIGH TECH is looking for YOU!!
1985 Pontiac Firebird Trans Am w/T-Tops
Engine:
5.0 Liter V8 with 4 Barrel Quadrajet
K&N air filter
Interior:
Stock
Upgraded Dome light to T-Top Roof Console
Suspension:
GM Shocks/Struts
GM Springs
Energy Suspension sway Bar bushings and Links
New NOS Slotted Wheels
GM Brakes and Rotors
Appearance:
Stock
Audio:
GM Touch Control AM/FM Cassette Deck.
New GM Speakers
Viper Alarm System
Slight Mods:
Larger Exhaust System. System Resembles Stock.
Rear Hatchback Window Tinted
Engine:
5.0 Liter V8 with 4 Barrel Quadrajet
K&N air filter
Interior:
Stock
Upgraded Dome light to T-Top Roof Console
Suspension:
GM Shocks/Struts
GM Springs
Energy Suspension sway Bar bushings and Links
New NOS Slotted Wheels
GM Brakes and Rotors
Appearance:
Stock
Audio:
GM Touch Control AM/FM Cassette Deck.
New GM Speakers
Viper Alarm System
Slight Mods:
Larger Exhaust System. System Resembles Stock.
Rear Hatchback Window Tinted
#26
Senior Member
iTrader: (3)
Join Date: Oct 1999
Location: Apple Valley, MN
Posts: 549
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Z28 convertible
Engine: Miniram 383
Transmission: T-56
Axle/Gears: 4.10 stk 10 bolt
Re: GM HIGH TECH is looking for YOU!!
92 Z28 convertable, 500 hp Miniram'ed 383, T56, longtubes and 4" Mufflex
#27
Senior Member
Join Date: Nov 2008
Location: Las Vegas, Nevada
Posts: 586
Likes: 0
Received 1 Like
on
1 Post
Car: 1988 Trans Am GTA
Engine: 350TPI
Transmission: 700R4
Axle/Gears: 3:27
Re: GM HIGH TECH is looking for YOU!!
1988 Pontiac Trans Am GTA, 5.7L 350 TPI. Goodyear Eagle GS-D3 tires, Hypertech performance chip, K&N cone filter. 81,000 miles on her, the exhaust is even still all original. Im 17 and this is my first car. Had her for almost a year and a half already. My baby.
Last edited by BigBadGTA; 01-06-2010 at 06:59 PM.
#28
Member
iTrader: (2)
Join Date: Oct 2008
Location: fresno ca
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 IROC-Z
Engine: 6.2 LS3
Transmission: MN12 T56 GTO
Axle/Gears: 3.73
Re: GM HIGH TECH is looking for YOU!!
mods
3.73 ring and pinion
edelbrock headers
jet stage 2 chips
jet fan switch
b&m tranny cooler..with hydralic lines not standard rubber
tci tranny servo
#29
Supreme Member
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes
on
42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: GM HIGH TECH is looking for YOU!!
makes me wish i had time this summer to get some new pics
#30
Senior Member
iTrader: (1)
Join Date: Jan 2003
Location: New Germany, MN
Posts: 949
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Iroc
Engine: 5.3
Transmission: 4L80E
Axle/Gears: 9 Inch w/ 3.55
Re: GM HIGH TECH is looking for YOU!!
I am sure I don't have a chance but hey.
1986 Iroc
406 TPI
150 shot
6 point cage
T56
1986 Iroc
406 TPI
150 shot
6 point cage
T56
#32
Junior Member
Join Date: Dec 2009
Location: Antioch, California
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Trans Am 5.0 TPI Fuel Injectio
Engine: 305 TPI
Transmission: (?)
Re: GM HIGH TECH is looking for YOU!!
Last edited by tortuga7708; 01-06-2010 at 11:25 PM.
#34
Member
Re: GM HIGH TECH is looking for YOU!!
mods are: 2007 c6 OEM corvette rims , eibach lowering springs , msd ignition, 8000k hids, flowmaster exhaust, re done custom interior, sound system
#35
Junior Member
iTrader: (3)
Join Date: Dec 2006
Location: Peoria,Az
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Z28
Engine: 408
Transmission: Th400
Axle/Gears: 3.42
Re: GM HIGH TECH is looking for YOU!!
12bolt moser 4.11 gears, 33spline gears, spintech 3.5in exhaust, hooker full length headers, built 700r4, work in progress
#36
Member
Join Date: Sep 2002
Location: Texas
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Pontiac Trans Am
Engine: 305TPI
Transmission: 700R4
Re: GM HIGH TECH is looking for YOU!!
Your car looks VERY much like I want my 1985 Trans Am to look like when I'm finished building it up. Right now it looks like junk yard leftovers, but it won't for too long I hope. I will have the spoiler on mine and my exhaust tips won't show like that. I'll also probably put the side molding back along the doors. I think it looks better. Though I'm probably in the minority on that. Right now I'm stripping the car down to just a rolling chassis to get the body work done and then painted. After that's all done I can start the engine work, and then rebuild the suspension. Once all that's done I'll tackle the interior.
Last edited by Black_Knight; 01-07-2010 at 01:52 AM.
#37
Junior Member
Join Date: May 2008
Location: Il
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 Iroc-Z
Engine: 305 TPI
Transmission: T-56 Manual
Axle/Gears: 3.23 10 bolt
Re: GM HIGH TECH is looking for YOU!!
Just basic head porting and exhuast 305 built .30 over with t56 and 4th gen rear end.
#38
Member
Join Date: Feb 2009
Location: NY
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
Car: Trans Am, Corvette
Engine: LB9, LT1
Transmission: 700R4, 4L60
Axle/Gears: 373, 259
Re: GM HIGH TECH is looking for YOU!!
Your car looks VERY much like I want my 1985 Trans Am to look like when I'm finished building it up. Right now it looks like junk yard leftovers, but it won't for too long I hope. I will have the spoiler on mine and my exhaust tips won't show like that. I'll also probably put the side molding back along the doors. I think it looks better. Though I'm probably in the minority on that. Right now I'm stripping the car down to just a rolling chassis to get the body work done and then painted. After that's all done I can start the engine work, and then rebuild the suspension. Once all that's done I'll tackle the interior.
I also have a Hawks firberglass repro Aerowing ready for prep n paint. Should be on this spring. Then the tails wont look so radical. Ive just always wanted big slashcut SS tips. So i did. Its actually a Borla adjustable catback, cant tell be looking at it though.
#39
Supreme Member
Join Date: May 2001
Location: Your neighbor's hood, MD
Posts: 2,228
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Camaro Z28 IROC-Z
Engine: 5.7L TPI
Transmission: T5
Axle/Gears: 3.42:1
Re: GM HIGH TECH is looking for YOU!!
Wow, there are some amazing cars in this post. I am not sure if mine is in the same class, but here is my thirdgen. I bought it back in early 2000 with a blown motor; it was in pretty sad shape and probably headed for the scrapper. It took a good bit of work to get it streetable again. I daily drove it for about 4 or so years while slowly bringing it back to it's former glory. A friend and I did a complete tear down/repaint back in 2004 when it was retired from daily driver status. I am currently working on an LT1/T56 swap along with a 4th gen LT1 dash conversion. As pictured it has:
l98 with misc bolt ons/t5/4th gen 3.42p ls1 spec rear/ls1 style front brakes/camaro ss wheels/cervini's 3" hood/91 camaro GFX/91 Z28 spoiler/99 TA seats & console
l98 with misc bolt ons/t5/4th gen 3.42p ls1 spec rear/ls1 style front brakes/camaro ss wheels/cervini's 3" hood/91 camaro GFX/91 Z28 spoiler/99 TA seats & console
#40
Member
Join Date: May 2007
Location: Albuquerque
Posts: 335
Likes: 0
Received 1 Like
on
1 Post
Car: 1989 IROC-Z28 Camaro
Engine: 403 LSX
Transmission: TH400
Axle/Gears: Moser 9" 3.25's
Re: GM HIGH TECH is looking for YOU!!
My 1989 IROCZ Camaro
5.7L TPI, BBK Throttle body, Hooker Cat-back.
T-56, Ram clutch, spohn torque arm.
4th Gen interior
ZO6 Motorsport wheels (currently)
5.7L TPI, BBK Throttle body, Hooker Cat-back.
T-56, Ram clutch, spohn torque arm.
4th Gen interior
ZO6 Motorsport wheels (currently)
#41
Member
Join Date: Sep 2002
Location: Texas
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Pontiac Trans Am
Engine: 305TPI
Transmission: 700R4
Re: GM HIGH TECH is looking for YOU!!
Thanx for the compliment..
I also have a Hawks firberglass repro Aerowing ready for prep n paint. Should be on this spring. Then the tails wont look so radical. Ive just always wanted big slashcut SS tips. So i did. Its actually a Borla adjustable catback, cant tell be looking at it though.
I also have a Hawks firberglass repro Aerowing ready for prep n paint. Should be on this spring. Then the tails wont look so radical. Ive just always wanted big slashcut SS tips. So i did. Its actually a Borla adjustable catback, cant tell be looking at it though.
#43
Member
iTrader: (1)
Join Date: Jun 2009
Location: houston tx
Posts: 410
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Camaro T-5
Engine: tbi 305
Transmission: t-5
Axle/Gears: ?
Re: GM HIGH TECH is looking for YOU!!
this is mah brothers 89 tpi iroc 1LE that mah dad painted and fixed
Last edited by 92_T-5; 01-07-2010 at 03:00 PM.
#45
Junior Member
iTrader: (1)
Join Date: Feb 2009
Location: Church Hill, TN
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Trans Am
Engine: V8 305, nothing big.
Re: GM HIGH TECH is looking for YOU!!
This is my '86 Trans AM. It's a bit odd, I ended up buying a '92 Firebird for a parts car and ended up switching out the water damaged TA Taillights with the Firebird's. Did a bit of tweeking with the wireing so that the signals light up with the breaklights, but still blink like they're suppose to
Here's a pic of it this past summer, after the parts and interior conversion:
And here are some pics I took of it about an hour ago, I just added some decals to it yesterday. It's snowing, so it was hard to get decent pics =/
As far as a Mod list goes, it's not much, but:
Custom Crimson Metallic paint [Credited to my Dad]
Torq Thrust polished aluminium mags, 16x8 front 17x10 rear
'92 Firebird Interior, Black
'92 Firebird Taillights
Custom Taillight Wireing
Here's a pic of it this past summer, after the parts and interior conversion:
And here are some pics I took of it about an hour ago, I just added some decals to it yesterday. It's snowing, so it was hard to get decent pics =/
As far as a Mod list goes, it's not much, but:
Custom Crimson Metallic paint [Credited to my Dad]
Torq Thrust polished aluminium mags, 16x8 front 17x10 rear
'92 Firebird Interior, Black
'92 Firebird Taillights
Custom Taillight Wireing
Last edited by Richard_Strahl; 01-07-2010 at 07:23 PM. Reason: Mod list
#46
Moderator
Join Date: Mar 2001
Location: Doghouse ······································ Car: 1989 Formula 350 Vert Engine: 350 L98 Transmission: 700R4 Axle/Gears: B&W 3.27
Posts: 14,235
Received 163 Likes
on
118 Posts
Car: 87 Formula T-Top, 87 Formula HT
Engine: 5.1L TPI, 5.0L TPI
Transmission: 700R4, M5
Axle/Gears: Sag 3.73, B&W 3.45
Re: GM HIGH TECH is looking for YOU!!
My 1987 Formula,
Mods:
-Converted from 4BBL to TPI,
-SLP 1.75" Headers, & Cat-Back
-Custom PROM
-Custom interior
-SLP Cam
-17" ROH ZS Rims, Yokohama ES100 Tires
- Best 1/4 Mile 14.8 sec
Mods:
-Converted from 4BBL to TPI,
-SLP 1.75" Headers, & Cat-Back
-Custom PROM
-Custom interior
-SLP Cam
-17" ROH ZS Rims, Yokohama ES100 Tires
- Best 1/4 Mile 14.8 sec
Last edited by okfoz; 01-08-2010 at 08:59 AM.
#47
Moderator
Join Date: Mar 2001
Location: Doghouse ······································ Car: 1989 Formula 350 Vert Engine: 350 L98 Transmission: 700R4 Axle/Gears: B&W 3.27
Posts: 14,235
Received 163 Likes
on
118 Posts
Car: 87 Formula T-Top, 87 Formula HT
Engine: 5.1L TPI, 5.0L TPI
Transmission: 700R4, M5
Axle/Gears: Sag 3.73, B&W 3.45
Re: GM HIGH TECH is looking for YOU!!
And a real deal ASC Formula 350 Convertible 1 of 42, "The car that does not exist"
A true survivor, original paint, unmodified.
A true survivor, original paint, unmodified.
Last edited by okfoz; 01-08-2010 at 09:13 AM.
#49
Member
Join Date: Jul 2002
Location: Baltimore MD area
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 El Camino
Engine: built 355
Transmission: T-56 upgraded internal
Axle/Gears: 10 bolt 3.42
Re: GM HIGH TECH is looking for YOU!!
my car is ugly but puts down good numbers, i just wanna recommend the guy in sweden
#50
Member
Join Date: Apr 2009
Location: NW Louisiana
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2008 C6 / 1982 Trans Am
Engine: LS3 / Hybrid LS1-406 SBC
Transmission: 6L80 / 4L60E
Axle/Gears: 2.56:1 / 3.23:1 4th gen Posi
Re: GM HIGH TECH is looking for YOU!!
1982 Trans Am (Viper GTS red )
305 with Q-Jet from '85 T/A
TH-700R4 from '85 T/A
275/40ZR18 tires around C5 Z06 wheels
Stock int. except for 1985 T/A shifter, 4th gen seats and seat belts, and small sound system
Last edited by sjgrimsley; 01-07-2010 at 11:05 PM.