Cigarette Lighter Won't Stay In Now....Why?
#1
Banned
Thread Starter
iTrader: (1)
Join Date: Feb 2000
Location: Bound Brook, NJ USA
Posts: 1,198
Likes: 0
Received 1 Like
on
1 Post
Car: 89 IROC-Z
Engine: 383
Transmission: 700R4
Cigarette Lighter Won't Stay In Now....Why?
Well I've had the cigarette lighter out of my car for a good 6 or 7 years now since my radar detector was plugged in there. I also use it for my power inverter when I datalog. I hardwired in my radar detector yesterday and when I went to reinstall the lighter it was loose in the recepticle and wouldn't stay in at all. Is it possible that the larger plugs from the radar detector and power inverter bent something inside there so it won't stay in now? If so which part is bent? A pic would be very helpful if possible.
#2
Supreme Member
iTrader: (4)
Join Date: Nov 2003
Location: santa barbara,ca
Posts: 1,194
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 iroc z
Engine: LSX 376 F1A
Transmission: 4l60e
Axle/Gears: 12 bolt 3.42
i have the same problem on my car too. i just wrapped tape around it to keep it tighter since i dont use it.
#4
Banned
Thread Starter
iTrader: (1)
Join Date: Feb 2000
Location: Bound Brook, NJ USA
Posts: 1,198
Likes: 0
Received 1 Like
on
1 Post
Car: 89 IROC-Z
Engine: 383
Transmission: 700R4
Ok got it straightened out. Here's the fix for the rest of you. Pull the fuse for the accessories or disconnect the battery. About 3/4" into the recepticle there are 2 tabs that face backward into the dash. If you use a pick or a small screwdriver you can bend these back into the opening. This snugged it right up.....5 minute fix.
Thread
Thread Starter
Forum
Replies
Last Post
bigjay89gta
Engine/Drivetrain/Suspension Parts for Sale
12
10-15-2015 08:04 AM