firechicken76

iTrader: (3)

W/o Driver, just wondering what all your third gens tip the scales at.

1. Model/year
2.Engine and trans
3.Options (ttops, ac, etc)
4.mods
5.Weight

Ok ill start....

A car I just sold

1.1986 Base firebird
2.carburated 305 w/ a t-5
3.Power windows, hatch pulldown motor.
4.Nothing really, differant are filter assem, flowmaster exhaust.
5.3050 pounds

My current car weighed after my 9" install but before my a/c removal.

1.1984 trans am
2.2002 ls1/t-56
3.power door locks, power windows, AC, ttops
4.Heavy ford 9" locker w/ 4.11's, alum drive shaft, 4th gen rad, 4th gen gas tank, headers, no cats, slp loudmouth exhaust, k& filter assem, wilwood 4 piston disc breaks all around, eibach springs, kyb shocks and struts, Subframe connects, strut tower brace, wonderbar, front hellwig sways, rear t/a. full gta body conversion, wheels, hood, fenders, gfx, 2002 t/a spoiler.
5.3150 pounds

gregsz-28

iTrader: (1)

1. 1985 Camaro
2. LG4/700r4
3. no
4. long tube headers, some weight reduction, I removed most of the things that would be considered options, such as back seat, heater, power steering, A/C, etc.
5. 3040 pounds, w/5 gallons gas

EvilCartman

iTrader: (1)

1. 82 z28
2. 350/th400
3. t-tops
4. 6 point roll bar, subframe connectors, no A/C, no sound deadening, no radio, lightweight front seats, weld pro stars...
5. 3188

mikesanto70

how much horsepower are you putting to the tires with and without the NOS? Trying to do some calculations!!!

strc09

iTrader: (5)

1. 1988 Trans AM GTA
2. 383TPI / Borg-Warner T56
3. Hardtop
4. Emmissions!, AC Delete!, transmission swap, gears, Custom CAI, bore/stroke, headers, exhaust, SLP Runners, intake, MSD ingnition parts, and Fiberglass hood
5. Stock weight: 4200-lbs and change. Modified weight: 3260-lbs.

skinny z

1. 86 IROC-Z
2. Carbed 350 w/ 700R4
3. T-tops, power windows/locks, a/c removed
4. Aluminum intake, iron heads, LT headers, single 3" no cat back, 9-bolt posi
5. 3450 w/ half tank of fuel

gregsz-28

iTrader: (1)

No, it wasn't.

Just because that's the first 4 digit number you saw on your door sticker, that does not mean your vehicle actually weighed that much.

strc09

iTrader: (5)

I'll have to get a pic of it.

I thought it was weird too considering the curb weight specs listed on the GTA Source show the car should weight between 3460-3530lbs.

gregsz-28

iTrader: (1)

That sounds about right.

Kevy Kev

I am considering purchasing an '87 Z28 with the LG4 / T-5. This particular Z is a hardtop with NO power options, NO a/c, NO radio, etc.

It has manual leather seats.

Any idea on what the weight would be?


Thanks!

-Kevin

scottmoyer

My fully loaded 87 IROC-Z in bone stock form was shipped from the factory to the dealer at 3478#. My GAWR comes in at 4288#. The GTA should be similar.

Kevy Kev

Anyone have a guess?

gregsz-28

iTrader: (1)

3,200-3,350 (no driver, half tank of gas)

Skyset

Um 32something IIRC

calebzman

iTrader: (3)

1. 1985 TA
2. 350 / T56
3. t-tops, no AC
4. sfc's, turbo, intercooler, 4th gen seats, single sub box, alum heads/driveshaft, spohn x-mem/tq arm
5. 3,400lbs

all4u

Stereo and subframe connectors weigh me down a bit but I think the car weighs about two of my brother's girlfriends, around 3300 lbs!

elano

iTrader: (2)

1. 1986 Camaro IROC-Z
2. 383 / Turbo 350
3. t-tops, power windows, locks, pulldown, steering, no ac
4. sfc's, aluminum intake, iron heads, lt headers, dual exhaust
5. ~3500lbs

Blackknight

iTrader: (1)

1. 89 Trans AM
2. 305 TBI
3. T-tops, power everything, AC
4. stock
5. ~1580 KG

sonjaab

1984 Z-28 L-69 auto 3:73 BW lim. slip t-tops all options
Reg. weight 3135 lbs.

F-Body Demon

iTrader: (1)

Ive had two on certified scales

1985 Trans Am LG4
T-Tops
AC
Automatic
9 Bolt Rear
Power Windows and Locks
3140 with a full tank

1991 Trans Am GTA
Hard Top
AC
Automatic
10 Bolt Rear
Power windows/locks/seats and Airbags
3480 with a full tank

Neither Car had any weight reduction or was modified from stock in any way and should serve as a good benchmark for the models if anyone wants to piece these together year by year, model by model.

Bullydawg

iTrader: (7)

I wonder what my formula weighs... I know of a scale in town, im going to have to check it out and post back... Any guesses? 350TPI Auto, Aluminum heads, etc?

firechicken76

iTrader: (3)

Ive got subrame connectors, a ford 9", a strut tower brace, and ttops and weigh 3200 lbs. ive also got an aluminum motor, aluminum driveshaft and an a/c delete.

id like to get some plastic ttops, and some light 4th gen seats....

when i put my magnacharger on i probably can expect to gain about 50 pounds...at least it will be good weight though.

bdle

[quote=firechicken76;4265345]

1. Model/year
2.Engine and trans
3.Options (ttops, ac, etc)
4.mods
5.Weight

Ok ill start....

A car I just sold

1.1986 Base firebird
2.carburated 305 w/ a t-5
3.Power windows, hatch pulldown motor.
4.Nothing really, differant are filter assem, flowmaster exhaust.
5.3050 pounds
[end quote]

ok
1. 1987 Camaro IROC-Z
2. TPI 350 with a 700R4
3. power windows, power door locks, power open rear hatch, AC, cant forget T-Tops
4. nothing except the stock 350 engine (had i 305 when i first bought it)
5. whatever stock weight is?

TPI TERR

iTrader: (9)

1. Model/year
2.Engine and trans
3.Options (ttops, ac, etc)
4.mods
5.Weight

1. 87 iroc
2. ls1/t56
3. hard top . power windows. full a/c. power locks. power everything. lol
4. full interior. full 4th gen dash, full leather seating inside, 4th gen ac. fully functional ac and heater, 4th gen plastic tank. 4th gen diff. aluminum drive shaft. big aluminum radiator. dual muffler setup. 18x9.5 inch replica z06 rims all around with 295s out back.
5. 3280

can probably cut down 60-80lbs with some oem rims.

F-Body Demon

iTrader: (1)

Update, 2980. Again on a certified scale. Gutted everything, basically if it isn't essential to vehicle operation or safety it isn't on the car anymore.

TPI-Formula350-

just weighed my , 1/4 tank of fuel no driver. 3252

BillybobJenkins

1. 86' Silver Camaro
2. V6 2.8 liter
3. A/C, Power windows, leather panels, manuel seats, pulldown hatch motor
4. Custom rims, windows tinted, new transmission, T-Grip Shifter, custom dual exhaust, added stereo console
5. About 3500 pounds, no driver and 1/2 tank of gas

FlippindaBird

iTrader: (10)

87 base firebird hard top carb V8 auto
aluminum heads
no front/back steel bumper
AC delete
hooker 2055rs
SLP loud mouth for 4thgens (the single 3" glasspack into 2 2.5'' tails)
PW/hatch
4th gen T/A wheels
no back seats, center console, carpet, plastics or headliner
no spare tire
no radio/speakers
stock drum brake rear now but will swap in the 4th gen T/A rear soon


anyone wanna venture a guess??

F-Body Demon

iTrader: (1)

2900ish

FlippindaBird

iTrader: (10)

NICE i expected 3100 so anything in between me and you and thats gold as far as im concerned!

InfernalVortex

iTrader: (4)

1992 Camaro RS hardtop
350 V8 (specs and such are in my vbgarage)
No A/C
fiberglass hood
3250 lbs with half a tank.

TPI-Formula350-

3340.... weigh it and see who's right

FlippindaBird

iTrader: (10)

3340 with me in it?? that sounds pretty heavy as it should have weighed that from the factory and ive easily taken 200lbs or more off the car wont be weighed until august thats why i posted this

FlippindaBird

iTrader: (10)

that guys 85 camaro weighed 3040 w/5 g of gas and that car is pretty much the same as mine except i have pop up headlights and aluminum heads

Orinackra

https://www.thirdgen.org/forums/susp...t-invoice.html

FlippindaBird

iTrader: (10)

i have my build sheet says 1940f 1372r =3312 so minus the approx 200 = 3100 and thats how i got my estimation so maybe im around 3150 but with that guy sayin his camaro is 3040 im thinking i could be lighter we'll find out in august, btw how much weight would a T5 swap drop?? is a t56 alot heavier then the t5?? if i can find one cheap enough im gonna do it get an aluminum driveshaft too


btw orin your car looks good

TPI-Formula350-

I was saying 3340 without a driver. My Formula with AC/Smog delete, Aluminum heads, Fiberglass hood/spoiler came in at 3252. I don't see how you lost 200lbs from what you have listed. Just weigh the car and stop guessing..Goto your local scrap yard they will have a scale.

Carlos773

iTrader: (3)

1. 1992 RS
2. 350 L05 / 700R4
3. T-tops, Ac semi delete.
4. Fiberglass hood, No spare tire, rear seats gone, full tank of gas, C5 rims.
5. 3469

Sound about right? Does a full tank of gas really make that much of a diff?

gregsz-28

iTrader: (1)

Yes.
Gas weighs 6-7lbs per gallon (depends on temp, colder gas will weigh more), and most third gen tanks hold 16.2 gallons (IIRC), so a full tank will contain 97.2-113.4lbs of gas, and an empty tank will contain 0lbs of gas.

F-Body Demon

iTrader: (1)

I have never heard of the temp effecting the weight of a petrolium product and I loaded trucks at a refinery by weight hot and cold. Temp will increase the volume, not weight per gallon.

BTW gas is 6.5 lbs per gallon

gregsz-28

iTrader: (1)

Here's an example. If you seal 1 gallon of gas in a container (6.5lbs), at 60*F, then the temperature decreases to 40*, you still have 6.5lbs of gas in that container, but now the volume of gas is less than 1 gallon.
So, the weight per gallon has increased in this situation.

F-Body Demon

iTrader: (1)

No sir, 6.5 lbs of gas makes 1 gallon regardless of temperature.

skinny z

Volume and density change with temperature.
A gallon of fuel at 80F has more volume and less density than a gallon of fuel at 32F. Gas pumps are calibrated at a specific temperature. Something to read next time you're pumping gas.
It pays to buy your fuel in the morning when it's cooler. Denser fuel equals more in the tank for a given metered amount.
If going strictly by weight (as in F1 racing ) then it doesn't matter what the temp is. You have so many kilos (or pounds ) of fuel permissable regardless of temp or the amount of space it takes up.
It's still a gallon at 6.5 lbs if the gallon is based on a specific gravity (which it is) rather than a volume (which it isn't).

gregsz-28

iTrader: (1)

Seems like a good explanation, but I still have a question.
You're saying a gas tank filled up when it is 32* will weigh more than one that is filled at 80*?(basically what I was trying to say originally, but I guess my reasoning was wrong...)
I'm think I'm confusing myself...

It does make sense that trucks (and F1 cars) would be filled by weight, not volume.

FlippindaBird

iTrader: (10)

like i said not going to a scale until august... the scrap yard is further away then the track... the back carpet weighs 40 lbs at least whats the front carpet weigh???, your formula has tpi correct?? if so thats heavier then a carb, your formula also has beefier sway bars prolly a few more pounds, your fomula has a carpet, back seats a center console a headliner all the interior plastics, 3rd gen rims, sub frame connectors probably has power seats too, my car is a bare bones base model with drum brakes not a formula that guys gta only weighed 3000 gutted and it has 100 lbs of ground effects , compare the weight of other bare bones cars on this thread... your saying that my car weighs more now then the day it was shipped after extracting at the VERY least 100lbs with just the heads and the carpets... thanks for repeating "just weigh it" though thats really helpful... i am just wondering and trying to get an "approximation" , if you dont understand that then why are your answering >? thanks for participating

skinny z

Yes. If you fill when it's cold, the gas will have a greater density and weigh more per cubic foot.
Gasoline expands with temperature. A gallon of gas is based on a volume at a specific temperature. Without the relavent numbers handy, let's say for arguements sake, a gallon of gasoline fits in a one cubic foot container at 32F. It will overfill that same cubic foot container when the tempreature is raised to 80F.
Check out a plastic gas can that you leave out in the sun. It swells up noticeably when it warms up, however no additional gas has been added.

gregsz-28

iTrader: (1)

thanks for the explanation skinny z.

flippindabird, I think you are right to assume that your car weighs about as much as mine or less. I wouldn't be surprised if it was <3000lbs. I still had most of my interior then, except my HVAC, headliner, insulation, and back seat. But I don't think that rear carpet weighs 40lbs.

FlippindaBird

iTrader: (10)

i actually read that weight in another thread here about weight reduction ill seach later to see if i can find it, 1 guy weighed stuff with a scale at his house and posted the weights, the carpet and the padding under were alot for my wife to carry lol the front carpet was heavy too, but even if its not 40 its still at least 15 and the front carpet is probably around 25 at least so together they gotta be 40+ but yeah i KNOW its not 3340, that would be more then it weighed from the factory lol

91ls1t56

91 Z28 hardtop ls1/t56 4th gen gauges,radiator,rear end ,gas tank,no power anything,no ac,no tilt,no rear seats,seatbelts,brackets,most of console gone,tubular k member,lca's,sfc's,tq arm,panhard rod and brace and it wieghs 3040 1740 front 1300 rear with almost no gas

TPI-Formula350-

Nice! You really got the weight down. Sure that LS1 being all aluminum helped a lot.