project89

iTrader: (1)

heres some pics of how the car sits to start




holes in the decklid

fix front fender


and heres were i started today


i took this panel down to bare metal and look what i found

doesnt look that bad right ? lets try from and angle


i wa sable to hammer most of almost back to flat so i would need minimal filler , unfortunatly i ran out of time/daylight today so i didnt even get to finish sanding the firat coat of filler on the panel


aanyways heres a quick shot of how i left it



i will be using
spi black epoxy primer
spi bure black base ( with either 8-12 grams of red or blue pearl) red would make it black cherry, i dont knwo what u would call it with blue pearl in it

heres an example of black cherry

and i will be using spi universal clear


car goes in for epoxy primer the second weekend in july
i will keep this updated as i do more body and prep work and then as i spray the car

86_irocz-28

blue would be awesome cant wait to see finished product

bluegrassz

iTrader: (3)

I have always loved that color. I am guessing its a Kandy color?
Are you going to put the Iroc back on the doors? If so what color?

project89

iTrader: (1)

im smoothing all the emblems on the car , i may however get some stencils and put some of the pearl in some clear and spray it just over the stenciels so the iroc on the doors stands out even when not in sunlight.

it would look like a ghost flame would if i did that.

after i spray the irocs i would then remove the stencils and then spray just the clear over the entire car


i am still undecided if im going to do that though


i dont think this would be considered a candy paint since im actually mixing my own pearl into the black base


also i am starting to lean twards blue pearl instead of the red pearl

Javier87z28

iTrader: (1)

Blue looks amazing on third gens! Any rust anywhere?

project89

iTrader: (1)

just some surface rust on the roof were the paint was chiped down to bare metal , the car was stripped and repainted sometime over its lifespan before i got it.

even the underside of the car is rust free

Javier87z28

iTrader: (1)

Nice man very nice ill keep my eye on this

bluegrassz

iTrader: (3)

A friend of mine did the black with blue pearl on a 78 Camaro years ago. Turned out real nice. Spray some test panels to see what you like best. I remember back in the day when I mixed auto paint for a living. PPG had a nice line of pearls even back then. I advise mixing up a extra pint or quart to save any touch ups or panel repair down the road.

Ron U.S.M.C.

After using red PPG pearl PRLX1 in a custom mixed PPG rally red ,it looks great with even red pearl in the black stripes but there is a down side to pearl. You loose the depth of the paint.You know when you look at the paint close a red without it looks deep.The pearl IMO takes some of that away. Would I do it again,yes.
A 4oz. bottle (way more than we needed) was $192.00. He gave it to me with a shop discount and because I was buying my products from him (pro. auto. paint store) for $141.00 .He did that allot during our exchanges. We only used the best PPG had to offer .Paint came out immaculate and with a ton of prep. and a qualified preferably a pro. shooting it yours will turn out great I'm sure.

If you have not read this yet its a perfect description of things to come . = https://www.thirdgen.org/forums/auto...ck-i-hate.html

project89

iTrader: (1)

lol im already like that even with my cars that dont have nice paint

my old iroc witht he 383 had really nice factory paint , i would wash and wax that thing like once a week , go out and hang out with my friends or goto the street races and id have ppl leaning on it or setting stuf fon the hood it drove me nuts.

my friends would purposly touch my car cause they knew id break out the towel and wipe the handprints off the car

project89

iTrader: (1)

heres what im dealing with on the pasenger side door

project89

iTrader: (1)

been working ont he hood since it had rustoleum paint on it , wish i would have thought of using a razor blade first , but ehh better late then never

bluegrassz

iTrader: (3)

Yeah, razor blades save time and sand paper. Looks like you have a good start.

project89

iTrader: (1)

thanks its been rough going so far . when i get off work at my first job it leaves me about 2 hours in the morning to work on it before i eat lunch shower and goto my second job, when i get home at night i have about an hour of daylight to work on it then.

luckily the car isnt being primed to july 13th so i have some time to get everything right before then

the schedual is looking something like

july 13th spray epoxy primer
17th to the 26th block sand and fix body work as needed
july 27 either prime again or lay base/pearl coat and clear ( if i need another coat of the expoxy primer on this day the car will go back for the base/pearl clear on august 10th

Javier87z28

iTrader: (1)

What paint are you using?

project89

iTrader: (1)

spi black expoxy primer

spi pure black base ( blue pearl added by me)

spi universal clear

its about 600$'s in materials

Javier87z28

iTrader: (1)

Not bad at all, curious to see how it ends up looking

project89

iTrader: (1)

i shouldnt say blue yet its still a tossup between red or blue pearl

http://www.ebay.com/itm/2-Oz-Metal-Flake-Patriot-Blue-Automotive-Grade-candy-hotrod-custom-auto-paint-/251236336122?pt=Motors_Automotive_Tools&hash=item3a7eda41fa
http://www.ebay.com/itm/Fire-Red-Halo-Holographic-Flake-House-Kolors-HVLP-air-gun-air-brush-HOK-Paint-/150935920070?pt=Motors_Automotive_Tools&vxp=mtr&hash=item23247b5dc6

its going to be a pearl powder not flake like those but it will be either one of those colors

Javier87z28

iTrader: (1)

Go blue man lol

project89

iTrader: (1)

lmao i like the red ( posted a picture of what it looks like at the begining of the thread )

the wife likes the blue

i may have to find a flip/flop red-blue pearl powder for it lol


more then likley it will end up with the blue pearl in it , ive learned if the wife is happy she dont say nothing when u spend more money on the car, when shes not happy she will bitch about the 12$ container of car wax lol

SiCkRs

iTrader: (6)

may i ask how exactly you get that black red you mentioned something of pearl do you mix the pearl on the clear or on the actual basecoat?

project89

iTrader: (1)

u mix the pearl in the basecoat , this makes it so the pearl only comes out in direct light , about 12 grams per gallon of base is how u mix it ( more or less to get ur desired amount of color or effect)

SiCkRs

iTrader: (6)

oh ok but i mean like do u mix it in the gallon or do you mix is as you are mixing the paint with the reducer? im very interested om this on my car for stripes

project89

iTrader: (1)

in the gallon , u could prolly do it as u add the reducer and stuff but then u might get a lil mor epearl from one batch to the next

Street Lethal

iTrader: (16)

... gtfooh lol. Seriously?

SiCkRs

iTrader: (6)

oh ok thank you for the advice

project89

iTrader: (1)

lol what?

Street Lethal

iTrader: (16)

Did you think that was an actual word I was using lmao? That is something you would read in a Batman comic book, after Batman clobbers the villain in the stomach, you would read the sound as being "gtfooh" as the villain leans over in pain lol. No, it was an acronym, I didn't want to write "get the fawk out of here" when asking if you really got married...

Welcome to the ball and chain club...

Javier87z28

iTrader: (1)

Lol i hear ya, Im not married myself and its already like that.Girlfriend-"well how much did you spend on your car parts and tools, because im going to spend that on clothes and shoes" since we have a joint account- not a good decision prior to marriage ive found out lol

project89

iTrader: (1)

haha thanks

ok on tuesday ill be picking up some rubber/plastic bumper stripper for the front and rear bumper covers as they have spider cracks in them , hopefully this stuff is easier then sanding them , cause i didnt have good luck when i tried sanding the spare rear bumper cover i had

Cadaver_Puncher

The black cherry is the color I want mine. But to find a reasonable and good body shop ( new landlord is a **** ) in Rhode island isn't easy.

project89

iTrader: (1)

black cherry is an amazing color but i do belive the blue is going t look amazing as well

SiCkRs

iTrader: (6)

how does it look with blue?

project89

iTrader: (1)

same as it does witht he red except it shows up blue instead of red , ill photoshop that picture so u can see an example

t-top havoc

iTrader: (3)

LMAO out loud!! IDK --- I Actually understand -- no interpreting needed!!...

Either 1 is going to be absolutely gorgeous & 1 of a kind

Street Lethal

iTrader: (16)

I felt like a Batman comic book for a second when Dave didn't get it at first...

project89

iTrader: (1)

wel i couldnt photoshop it every time i try to change just the red it also changed the black sections so it dont look right

project89

iTrader: (1)

the blue effect should look something like this

'87IROCZOWNER69

iTrader: (1)

Yep I like blue!

project89

iTrader: (1)

sorry i havent updated this in a few days , im waiting on some rubber/plastic safe paint stripper to arrive so i can strip the front and rear bumper cover's should have it int he next day or two

Cadaver_Puncher

Wanna come do mine? Lol

project89

iTrader: (1)

hell noooooooooo lmao , this is the first time ive really dealt with stripping and preping a car, iand i can honestly say never again.
lmao i say that now but i bet u next yer ill be doing the same thing to ne of my other f-bodys

Maverick H1L

iTrader: (8)

I can tell you from experience that Bumper Stripper ain't worth beans...

It took the RustOleum off of my bumper covers just fine. Did not touch the base paint underneath (aka the black came off and they're still red). Even using a second can (first can went to the black). Which is one of the reasons I was going to go to the 91-92 bumper covers (because sanding them was a royal pain, but it needed to be done due to the spider cracking).

But it'll work good on your hood!

Ron U.S.M.C.

. Mix up a small batch of base and pearl and shoot cards .My painter shot several cards with different amounts of pearl and you would be amazed at how different each looked. He used spray can clear on the cards over the base to get a general idea as to what it will look like. Be sure the base on the cards is completely dry before shooting the clear. Even if the base pearl is not exactly what you end up with in the can you will have a general idea.

project89

iTrader: (1)

will do for sure , i have some time before the car is painted still , its going for primer in 2 weeks and then paint 2-3 weeks after that

my paint stripper primer and the rest of the stuff i ordered will be here on monday according to the tracking number.

i just hope it cools off next week or i wont be working on the car , it was 107* here yesterday and even at 7pm it was still 93*

its supposed to be hotter out today but i havent bothered to check the temperature as id rather not know how hot it really is

project89

iTrader: (1)

epoxy primer and catalyst are here my new sanding blocks are here unfortunalty my bumper stripper is comming from ga so it wont be here till friday , looks like im stripping the bumpers with some ol fashonioned elbow grease

MintWS6FORMULA

She wants it blue so that it's her preferred color when she gets it in the divorce.

project89

iTrader: (1)

here ya go , somone plz tell me im not crazy for doing this myself lol

bluegrassz

iTrader: (3)

Yes you are crazy for doing it yourself and not talking some of your friends / family into helping.

I know it is a pain. A couple of extra hands speeds things up.

project89

iTrader: (1)

its 11:20 am here and my friend just dropped off his da for me, im feeling pretty confident i can finish the car tonight to have it ready for friday

here is how the car sits right now