xiholdtruex

i just installed my radio today,i used a wiring harness,i butt connected all the wire but for some reason my radio keeps turning off and on while i am driving.can anyone lead me in the right direction on my search???the only thing i can think it is is a short some where in a wire.

thanks and godbless

sincerly

carlos m mesa

KYLE87

iTrader: (5)

Yeah its probally just a loose wire and off and oning on bumps. I had this problem and mine was actually a battery cable, but if it worked ok before im betting on a bad connection or loose wire.

Nater2491

iTrader: (1)

i would suggest soldiering it

klez

iTrader: (1)

well soldering isnt quite necessary , although it would def. get the job done. but yes, if your previous radio worked fine, and now the one you just installed is cutting out, then its simply a bad connection( i suppose you radio could be bad but lets assume its fine). I would guess its either the power wire or the one that tells your radio to turn on/off when you turn your car on/off.

RicksIroc86

did you double check all the butt connectors, its probably the ground or power so check those

zrated57

This is probably not your problem, but I'll throw it out there.

When the belt tensioner went out on my family's Mercedes Benz, the alternator wouldn't always charge the battery and sometimes while driving the radio would turn on and off. When the tensioner was replaced the problem went away.

Again, probably not your problem, just throwing it out there. Maybe something to do with the charging system, but if it checks out, then I'd agree with the other posts. Loose connections.

-zrated57

xiholdtruex

im going to try using smaller gauge butt connectors i think the ones i used were to big mhmm,i have a brand new tensioner,alternator and optima battery i doubt its the problem but i will check anyways.

as always thats for the help

carlos mesa

HCR13

iTrader: (5)

I'd also check the ground, thats always a bitch...

xiholdtruex

thats what im thinking it is i am going to run a new ground with a thicker gauge wire to see if it works this weekend.

Aerohokie

iTrader: (2)

Also probably not your problem, but when mine did that it was because the power wire came loose from the mount and was grounding to the headers on bumps after the insulation melted.

Benito Yepez

Check bolt (ground)from the negative cable from battery

Randeenice

If the radio gets hot they tend to shut off I had the same problem and I research for days until I found the solution I tried a computer fan at the back and install it to the radio .The cooling system on the radios are very bad trust me so as soon as it get a little hot it shuts off on your drive and it can be very annoying I know