ecm noob question?! i need help asap
#1
Member
Thread Starter
iTrader: (1)
Join Date: Nov 2009
Location: Hillsboro, Missouri
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Chevy Camaro IROC-Z
Engine: 350 TPI
Transmission: 700R-4
Axle/Gears: Borg-Warner rear axle 2.77
ecm noob question?! i need help asap
hi,
i had a custom chip for bigger injectors(i don't remember if i pulled a stock one out or not), now i have stock injectors, so i pulled out the custom moates chip.
question, do i need a stock memcal/(or prom?) and does it go where the custom one was? or is it built in somewhere and nothing goes in this spot?
i had a custom chip for bigger injectors(i don't remember if i pulled a stock one out or not), now i have stock injectors, so i pulled out the custom moates chip.
question, do i need a stock memcal/(or prom?) and does it go where the custom one was? or is it built in somewhere and nothing goes in this spot?
#2
Member
Thread Starter
iTrader: (1)
Join Date: Nov 2009
Location: Hillsboro, Missouri
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Chevy Camaro IROC-Z
Engine: 350 TPI
Transmission: 700R-4
Axle/Gears: Borg-Warner rear axle 2.77
Re: ecm noob question?! i need help asap
and if so whats the prom number i need to put in? 5.7 89 tpi auto
#3
Member
iTrader: (1)
Join Date: Apr 2006
Location: Washington
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Sport Coupe
Engine: 3800 Series II Turbo
Transmission: 4th-gen WC T5
Axle/Gears: 3.27 BW Limited
Re: ecm noob question?! i need help asap
You need to replace the PROM with a stocker or a correctly tuned chip.
#5
Member
Thread Starter
iTrader: (1)
Join Date: Nov 2009
Location: Hillsboro, Missouri
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Chevy Camaro IROC-Z
Engine: 350 TPI
Transmission: 700R-4
Axle/Gears: Borg-Warner rear axle 2.77
Re: ecm noob question?! i need help asap
ok if the part number for the 5l is 16060836 what is the 5.7??
Trending Topics
#8
Member
iTrader: (1)
Join Date: Apr 2006
Location: Washington
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Sport Coupe
Engine: 3800 Series II Turbo
Transmission: 4th-gen WC T5
Axle/Gears: 3.27 BW Limited
Re: ecm noob question?! i need help asap
He needs a MAF PROM not MAP.
Also he's an '89 so he needs that specific year because it is the only one GM made with the MAF and without 9 injectors.
ARAP should be the right BIN iirc.
Also he's an '89 so he needs that specific year because it is the only one GM made with the MAF and without 9 injectors.
ARAP should be the right BIN iirc.
#9
Member
iTrader: (1)
Join Date: Apr 2006
Location: Washington
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Sport Coupe
Engine: 3800 Series II Turbo
Transmission: 4th-gen WC T5
Axle/Gears: 3.27 BW Limited
Re: ecm noob question?! i need help asap
Can't edit posts, ARAP is the Vette BIN. Would run but have too hot of a timing table. Try looking for AUJL.
#10
Sponsor
iTrader: (92)
Re: ecm noob question?! i need help asap
yes arap might cause a iron head to ping,
https://www.thirdgen.org/forums/engi...80-memcal.html
or if you find a 305 one 86-89 I will reprogram for fairly cheap $6e mask
if you have a v8 memcal all you would need is a chip burned togo into your moates g1, let me know if I can help !!
https://www.thirdgen.org/forums/engi...80-memcal.html
or if you find a 305 one 86-89 I will reprogram for fairly cheap $6e mask
if you have a v8 memcal all you would need is a chip burned togo into your moates g1, let me know if I can help !!
Last edited by Tuned Performance; 10-27-2011 at 02:06 PM.
#11
Member
Thread Starter
iTrader: (1)
Join Date: Nov 2009
Location: Hillsboro, Missouri
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Chevy Camaro IROC-Z
Engine: 350 TPI
Transmission: 700R-4
Axle/Gears: Borg-Warner rear axle 2.77
Re: ecm noob question?! i need help asap
is it 16129303? i cant find one for sale darnet,
#12
Member
Thread Starter
iTrader: (1)
Join Date: Nov 2009
Location: Hillsboro, Missouri
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Chevy Camaro IROC-Z
Engine: 350 TPI
Transmission: 700R-4
Axle/Gears: Borg-Warner rear axle 2.77
Re: ecm noob question?! i need help asap
Okay, I'm an idiot, the old chip as attached to the Moates! lol
So here is my next question, it has markings on it but this is a replacement ecu, can you verify if its the right chip? i looked up 2 codes one said 5.7 and the other said 5.0
silver tab; 4218 AUJL 0577
under that 014 69300 b9416AD
next chip;16072665 91 07
last chip; 16133420 91 30 printed twice
So here is my next question, it has markings on it but this is a replacement ecu, can you verify if its the right chip? i looked up 2 codes one said 5.7 and the other said 5.0
silver tab; 4218 AUJL 0577
under that 014 69300 b9416AD
next chip;16072665 91 07
last chip; 16133420 91 30 printed twice
#13
Member
iTrader: (1)
Join Date: Apr 2006
Location: Washington
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Sport Coupe
Engine: 3800 Series II Turbo
Transmission: 4th-gen WC T5
Axle/Gears: 3.27 BW Limited
Re: ecm noob question?! i need help asap
AUJL is the correct chip, read my post a bit back in the thread.
Thread
Thread Starter
Forum
Replies
Last Post