Jacobs ignition, how do i hook it up?
#1
Member
Thread Starter
Join Date: May 2002
Location: Oakville, Ontario, Canada
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
Jacobs ignition, how do i hook it up?
i have a 1990 IROC-z, just got this off of ebay, has the pro street thing and the coil, and this other thing, pretty much it is a complete setup, but i need to know how to hook it up, anyone done this?
thanks, Dave
thanks, Dave
#3
Junior Member
Join Date: Aug 1999
Location: Stafford, VA, USA
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Did you get the GM wiring harness with what you bought? It makes the job very easy. I'd look around Jacobs website:
www.jacobselectronics.com
They have wiring diagrams there. Basically the white and black wires go to the ultra coil. the red and green wires connect to the wires coming from your distributor. And the red and black wires connect to the battery.
For reference I have the Pro-Street on my 85 Berlinetta. IT makes a difference in starting and driving. My car is 200 miles away from me though, so I can't go look at how the wires are connected. I'd suggest to call jacobs and get the harness for your car. It's worth it.
This other thing you talk about, is it a secondary trigger? If so, then you plug the coil wire into it and connect the two smaller wires to the red and green wires coming out of the pro-street computer.
-Dave
www.jacobselectronics.com
They have wiring diagrams there. Basically the white and black wires go to the ultra coil. the red and green wires connect to the wires coming from your distributor. And the red and black wires connect to the battery.
For reference I have the Pro-Street on my 85 Berlinetta. IT makes a difference in starting and driving. My car is 200 miles away from me though, so I can't go look at how the wires are connected. I'd suggest to call jacobs and get the harness for your car. It's worth it.
This other thing you talk about, is it a secondary trigger? If so, then you plug the coil wire into it and connect the two smaller wires to the red and green wires coming out of the pro-street computer.
-Dave
#4
Member
Thread Starter
Join Date: May 2002
Location: Oakville, Ontario, Canada
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
thanks, i looked at the wiring diagram, doesnt seem to hard, i think i found someone around her that has done it, so it shouldnt be too much trouble, thanks
Thread
Thread Starter
Forum
Replies
Last Post
Z28/ZR1
Engine/Drivetrain/Suspension Parts for Sale
3
10-23-2015 01:04 PM