87-88 MAF harness IP connector pinout.
04-18-2010, 09:36 AM
#1
Junior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2006
Location: Central Texas
Posts: 62
Received 0 Likes
on
0 Posts
Car: 87 Z28
Engine: TPI 350
Transmission: 700R4
Axle/Gears: 2:73
87-88 MAF harness IP connector pinout.
I need the IP connector pinout for a 87-88 MAF TPI (clear connector on the harness by the ECM). I'm installing the harness in a 86 Monte SS and I am pretty sure they will not match up. From what I researched there are a few I will need to correct, and re route in the SS harness. I have a GM service manual for the SS, but not for the TPI. I can take a few pics of the connector if it will help. Does anyone have this??
Thanks!
Scott.
Thanks!
Scott.
05-07-2010, 10:15 AM
#2
Junior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2006
Location: Central Texas
Posts: 62
Received 0 Likes
on
0 Posts
Car: 87 Z28
Engine: TPI 350
Transmission: 700R4
Axle/Gears: 2:73
Re: 87-88 MAF harness IP connector pinout.
Honestly, I don't understand the silence. I'm a car enthusiast just like the rest here. I've never got this cold shoulder from any other site. What gives with you guys? This system is a thirdgen system. If any one of you needed help, and I had the answer, I would give it to you gladly. Especially if it would save you time and head ache. I would just like the same in return.
05-07-2010, 02:54 PM
#3
Member
iTrader: (3)
Join Date: Mar 2010
Location: sturgeon bay wisconsin
Posts: 271
Likes: 0
Received 3 Likes
on
3 Posts
Car: 91 firebird
Engine: 350
Transmission: 700r4
Axle/Gears: stock
Re: 87-88 MAF harness IP connector pinout.
read the rules and youll know why you have no response
Last edited by aremy10; 05-07-2010 at 03:14 PM.
05-07-2010, 09:16 PM
#4
Supreme Member
iTrader: (13)
Join Date: Apr 2005
Location: Not in Kansas anymore
Posts: 7,732
Likes: 0
Received 11 Likes
on
11 Posts
Car: 82 Z28
Engine: 383 SP EFI/ 4150 TB
Transmission: T400
Axle/Gears: QP 9" 3.73
Re: 87-88 MAF harness IP connector pinout.
http://www.austinthirdgen.org/mkport...ntents/images/
Why would that be?
05-08-2010, 02:23 PM
#6
Supreme Member
iTrader: (8)
Join Date: Aug 2003
Location: LeRoy, NY
Posts: 7,240
Likes: 0
Received 5 Likes
on
4 Posts
Car: 2003 Hyundai Tiburon GT
Engine: 2.7L V6
Transmission: 6-speed
Axle/Gears: 4.41
Re: 87-88 MAF harness IP connector pinout.
Would probably help to know what car it came from as the IP connectors may be different... Where it's going doesn't matter as much.
05-08-2010, 04:52 PM
#7
Junior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2006
Location: Central Texas
Posts: 62
Received 0 Likes
on
0 Posts
Car: 87 Z28
Engine: TPI 350
Transmission: 700R4
Axle/Gears: 2:73
Re: 87-88 MAF harness IP connector pinout.
So I'll not get a response since the third gen system is not in a third gen....if I hear you correctly. I didn't ask a G body question, I just said I was installing it in the G body.
Since the computer system came from an 88 IROC with a 5 speed, and since they are third generation......then here would be the logical place to ask.
aremy10, if you don't want to help, then don't. I'm not prodding you about this. I just asked an honest question, I'm not looking to spar. If I wanted that, I'd go to another site. I just have a car I'm working on, and need a little help, that's all.
Last edited by powerslave; 05-09-2010 at 08:25 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Billy Decker
Engine/Drivetrain/Suspension Wanted
0
09-04-2015 03:46 PM
IROCZDAVE (88-L98)
Engine/Drivetrain/Suspension Parts for Sale
0
09-02-2015 08:43 AM
