where are the fuses in an 89 firebird
08-24-2010, 10:31 PM
#1
Junior Member
Thread Starter
Join Date: Aug 2010
Location: Fort Myers, Florida
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Pontiac Firebird Base T Top
Engine: 305 V8 carb
Transmission: 700r4
where are the fuses in an 89 firebird
I have no power to almost anything and i replaced all the fuses under the dash and the 1 right next to the battery. The battery is brand new so i know its not that. Are there any other fuses in the car?
08-25-2010, 08:42 AM
#2
Supreme Member
Join Date: Sep 2002
Location: Cary, North Carolina
Posts: 9,192
Likes: 0
Received 16 Likes
on
16 Posts
Car: 1992 RS
Engine: Carbed 350
Transmission: 700R4
Axle/Gears: 3.42 posi
Re: where are the fuses in an 89 firebird
Maybe you fried a fusible link - they all connect to starter or to the power distribution center between the battery and the radiator. And make sure your grounds are all good - battery to body (at battery), battery to motor (at block), motor to body (pass side head to firewall).
08-25-2010, 09:21 PM
#3
Junior Member
Thread Starter
Join Date: Aug 2010
Location: Fort Myers, Florida
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Pontiac Firebird Base T Top
Engine: 305 V8 carb
Transmission: 700r4
Re: where are the fuses in an 89 firebird
Thanks! yeah it was a fusable link. now i have power again!!
09-29-2010, 01:24 PM
#4
Member
Join Date: Apr 2010
Location: tuckerton nj
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 camaro,88 firebird
Engine: 2.8 v6,5.0 tpi
Transmission: manual
Axle/Gears: 3.47
Re: where are the fuses in an 89 firebird
is there a fusible link that goes to the fuel pump?
07-06-2013, 03:51 PM
#5
Junior Member
Join Date: Jan 2001
Location: Abilene, Texas
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Formula - Red
Engine: 350 TPI
Transmission: 700 R4
Axle/Gears: 3.73 Posi
Re: where are the fuses in an 89 firebird
Had a similar issue on my bride's 89 Formula. It was a nearly new ground cable, and was intermittently open.
Fortunately I traced it out with an ohmmeter before I started throwing parts at it.
Fortunately I traced it out with an ohmmeter before I started throwing parts at it.
Thread
Thread Starter
Forum
Replies
Last Post
Ghettobird52
Tech / General Engine
15
12-29-2023 08:23 AM
