what are the common symptoms of a bad ECM??
#1
what are the common symptoms of a bad ECM??
I am having multiple problems from multiple areas. I just bought, and have been working on this car that someone else gave up on. I am suspecting it is a ECM problem, but their are so many threads about drivetrain swapping related to the ECM that i am having trouble finding threads to give me the common symptoms of ECM problems.
92 3.1 manual
sorry wrong section, no wonder i couldnt find anything
92 3.1 manual
sorry wrong section, no wonder i couldnt find anything
Last edited by yellowsnow; 12-29-2010 at 11:45 AM.
#2
Supreme Member
iTrader: (17)
Re: what are the common symptoms of a bad ECM??
A bad ecm is hard to detect and especially pin point. You may run into issues such as stalling, bad idle, and hard starting. The most best way is to run the trouble shooting by grounding pins a and b in the ALDL. The common error would be a code 51 but the code 51 can also be a bad MemCal. Here is a page of the issue. Please post up the trouble codes that you are experiencing.
#4
Re: what are the common symptoms of a bad ECM??
im going to work on it some more today. i have no speedo, oil pressure gauge, temp gauge, bouncing idle till warm, and it feels like their is no timing advance. Im sure it is either a wiring issue or the ECM. I'm going to spend the day tracking down wires then go from their.
#6
Re: what are the common symptoms of a bad ECM??
alright i got my oil pressure and temp to work. pulled the codes 34 and 44. I checked my MAF or intake air sensor (whatever) and it has no resistance. So thats probly causing the lean code.
so i guess its not the puter. im going to start a new thread with my crazy speedo problem.
so i guess its not the puter. im going to start a new thread with my crazy speedo problem.
#7
Supreme Member
iTrader: (17)
Re: what are the common symptoms of a bad ECM??
alright i got my oil pressure and temp to work. pulled the codes 34 and 44. I checked my MAF or intake air sensor (whatever) and it has no resistance. So thats probly causing the lean code.
so i guess its not the puter. im going to start a new thread with my crazy speedo problem.
so i guess its not the puter. im going to start a new thread with my crazy speedo problem.
Any way. Here are the sheets to use as a troubleshooter.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post