Exhaust Post your questions and suggestions about stock or aftermarket exhaust setups. Third Gen exhaust sound files and videos!

CFM #'s for mufflers and dyno numbers from Car Craft

Old 12-16-2000, 10:08 AM
  #1  
Junior Member
Thread Starter
 
importfighter00's Avatar
 
Join Date: Dec 2000
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
CFM #'s for mufflers and dyno numbers from Car Craft

Flow #'s at 28 in. of h2o

Dynomax Race Magnum - 528 cfm
Thrush Magnum Glasspack - 507 cfm
Summit Fully Welded - 343 cfm
Flowtech Afterburner - 342 cfm
Dynomax Super Turbo - 333 cfm
Hooker Competition - 232 cfm
Summit Turbo - 309 cfm
Thrush Boss Turbo - 297 cfm


Peak #'s on a 350

Dynomax Race Magnum - 409 hp 394tq
Thrush Magnum Glasspack - 409 389
Summit Fully Welded - 415 390
Flowtech Afterburner - 409 391
Dynomax Super Turbo - 412 387
Hooker Competition - 397 381
Summit Turbo - 405 383
Thrush Boss Turbo - 407 384


Avg #'s on a 350 from 2,500 to 6,000 rpm

Dynomax Race Magnum - 298 hp 366tq
Thrush Magnum Glasspack - 297 365
Summit Fully Welded - 295 362
Flowtech Afterburner - 294 361
Dynomax Super Turbo - 292 358
Hooker Competition - 286 351
Summit Turbo - 291 357
Thrush Boss Turbo - 292 357

Well there you have it!

Later.

Aaron
Old 12-21-2000, 10:11 PM
  #2  
Senior Member

 
CamaroMike's Avatar
 
Join Date: Nov 1999
Location: Omaha, NE
Posts: 803
Likes: 0
Received 0 Likes on 0 Posts
What pipe diameters?

------------------
84 Camaro ZZ4 with HOT cam. 1.88 60' (12.98 @ 105MPH E.T.)
Other Mods: You name it and I have probably changed it.

91 Firebird 5.0L TBI

ASE Certified Auto Tech
LIVE AND DIE BY THE ALMIGHTY BOWTIE!
Old 12-23-2000, 10:19 PM
  #3  
Member
 
evil t/a's Avatar
 
Join Date: Oct 1999
Location: mission hills ,ca
Posts: 381
Likes: 0
Received 0 Likes on 0 Posts
Those are for mufflers under $40 ,hence no flowmaster , hooker aerochamber, borla ,B@B ,mufflex, ect...
Old 01-01-2001, 03:38 PM
  #4  
Supreme Member
 
JakeJr's Avatar
 
Join Date: Jul 2000
Location: Kempner,TX,
Posts: 1,014
Likes: 0
Received 0 Likes on 0 Posts
Car: 1996 Vette / 1992 GSX1100F Suzuki
Engine: 1996 Corvette Coupe 388 LT1 (+.060)
Transmission: Auto
Axle/Gears: 3.07
What month was the issue that had all that good info? Did it show any sound level comparisons too.

Thanks, and Happy New Year.

Jake

------------------
1986 Corvette Coupe, 415 CID, Edelbrock 6073s, ZZ9
Old 01-01-2001, 10:59 PM
  #5  
Junior Member
 
MIKES 88GTA's Avatar
 
Join Date: Jul 2000
Location: gilmer,tx
Posts: 86
Likes: 0
Received 0 Likes on 0 Posts
I've got a "muffler shop special" 3' intermediate pipe with no cat and a 3' race magnum on my GTA. It doesn't sound the best I've ever heard but it came that way, after I got the car I cut the tailpipe off and at parking lot speed barely riding the brake it rattles tin roofs (SONIC DRIVE IN) and sets off car alarms. AWesome sound like that and very throaty when I get on it.I'd recomend it for that but it's still not exactly the sound I'm looking for.
Old 01-01-2001, 11:08 PM
  #6  
Moderator

 
AlkyIROC's Avatar
 
Join Date: Jul 1999
Location: 51°N 114°W, 3500'
Posts: 17,106
Likes: 0
Received 120 Likes on 101 Posts
Car: 87 IROC L98
Engine: 588 Alcohol BBC
Transmission: Powerglide
Axle/Gears: Ford 9"/31 spline spool/4.86
Not much but good reading concerning the topic.
http://www.calgarydragracing.ab.ca/exhaust.html


------------------
Stephen's racing page

87 IROC-Z Pro ET Bracket Race Car
383 stroker (carbed) with double hump cast iron heads and pump gas
454 Big Block buildup now in progress for the 2001 racing season

Best results before the 383 blew up
Best ET on a time slip: 11.857 altitude corrected to 11.163
Best MPH on a time slip: 117.87 altitude corrected to 126.10
Altitude corrected rear wheel HP based on power to weight ratio: 476.5
Best 60 foot: 1.662

Racing at 3500 feet elevation but most race days it's over 5000 feet density altitude!
Member of the Calgary Drag Racing Association

87 IROC bracket car, 91 454SS daily driver, 95 Homebuilt Harley
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM
1984HO
LTX and LSX
20
03-19-2021 11:59 AM
86IROC112
Engine/Drivetrain/Suspension Parts for Sale
4
08-17-2015 02:00 PM
MY87LT
Transmissions and Drivetrain
12
08-17-2015 08:43 AM
85Iroc-Z
Power Adders
18
08-13-2015 01:58 AM


Thread Tools
Search this Thread
Quick Reply: CFM #'s for mufflers and dyno numbers from Car Craft



All times are GMT -5. The time now is 08:51 AM.