vortec headers?
#1
Junior Member
Thread Starter
Join Date: Oct 2007
Location: sacramento
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 camaro, 83 rx7, 07 cbr600rr
Engine: 305, vortec heads
Transmission: t5
Axle/Gears: 3.73
vortec headers?
OK here's my deal i put vortec heads on the maro, the stock exhaust has to go its been leaking for the last week but, the passenger side stock manifold holes don't match up, i can pinch the rear bolt hole with my fingers, it hangs past the head, is this normal for these heads? anyone got any ideas should i buy some(what kind)
#2
Supreme Member
iTrader: (5)
Join Date: Jan 2002
Location: Orland Park, IL
Posts: 13,619
Likes: 0
Received 3 Likes
on
3 Posts
Car: 1984 Z28
Engine: SLOW carbed ls
Transmission: TH400 with brake, 8" PTC converter
Axle/Gears: moser 9" 4.11
Re: vortec headers?
back hole isn't needed if you're talking about the 7th extra bolt hole. only need the 6 bolts. Definitely killing the whole point of vortec head swapping with stock manifolds, how about some nice tubular headers instead?
#3
Junior Member
Thread Starter
Join Date: Oct 2007
Location: sacramento
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 camaro, 83 rx7, 07 cbr600rr
Engine: 305, vortec heads
Transmission: t5
Axle/Gears: 3.73
Re: vortec headers?
i'm going to be getting tubular headers this weekend just tring to make sure that they are going to fit
#5
Moderator
iTrader: (1)
Re: vortec headers?
Yes there is a difference. The standard SBC heads have an extra hole on the back passenger side #8 cylinder (the #1 cylinder on the driver's side head). Vortec heads are missing that extra hole, and our stock exhaust manifolds require it. Headers will work with Vortec heads, no problem there.
#6
Junior Member
Thread Starter
Join Date: Oct 2007
Location: sacramento
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 camaro, 83 rx7, 07 cbr600rr
Engine: 305, vortec heads
Transmission: t5
Axle/Gears: 3.73
Re: vortec headers?
ok that what i was trying to say so should i get headers for a 305 or something else? or just sbc headers that will fit in the camaro? will pretty much every sbc header fit the vortec heads?
Trending Topics
#9
Moderator
iTrader: (1)
Re: vortec headers?
I guess when I said "headers will work with vortec heads, no problem there" I should have said ALL headers for thirdgens will work with Vortec heads.
And, the emissions tubes arent goofy, they are required by federal law to be on all street vehicles that came with them. That includes thirdgens.
The Hooker 2055's are a good choice.
And, the emissions tubes arent goofy, they are required by federal law to be on all street vehicles that came with them. That includes thirdgens.
The Hooker 2055's are a good choice.
#11
Junior Member
Thread Starter
Join Date: Oct 2007
Location: sacramento
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 camaro, 83 rx7, 07 cbr600rr
Engine: 305, vortec heads
Transmission: t5
Axle/Gears: 3.73
Re: vortec headers?
i ordered the hooker 2055 earlier today thanks agian for the help
Thread
Thread Starter
Forum
Replies
Last Post