exhaust system ideas for an 84 camaro
#1
Junior Member
Thread Starter
Join Date: Mar 2007
Location: Staten Island, NY
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Camaro Z28
Engine: 350 from an elcamino
Transmission: stock t-5
Axle/Gears: 10 bolt 3.73 limited slip
exhaust system ideas for an 84 camaro
i have a basically stock 350 with a t5 in the car. 3.23 limited slip rear. Im looking to put headers with a full exhaust on it. i was thinking about these headers and y pipe
http://store.summitracing.com/partde...5&autoview=sku
http://store.summitracing.com/partde...5&autoview=sku
i was wondering what cat, and cat back would be a good idea to use with this. im not looking for anything that has to be modified, as i dont have the tools or experience.
http://store.summitracing.com/partde...5&autoview=sku
http://store.summitracing.com/partde...5&autoview=sku
i was wondering what cat, and cat back would be a good idea to use with this. im not looking for anything that has to be modified, as i dont have the tools or experience.
#2
Moderator
iTrader: (14)
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes
on
34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
For another $50, you can have much better headers and y-pipe
http://store.summitracing.com/partde...0&autoview=sku
Cat, CTO-9118.
Cat-back, whatever you want that's made for the '86-'90 TPI single-cat application.
That stuff will all bolt in (with the possible exception of a hanger or two).
http://store.summitracing.com/partde...0&autoview=sku
Cat, CTO-9118.
Cat-back, whatever you want that's made for the '86-'90 TPI single-cat application.
That stuff will all bolt in (with the possible exception of a hanger or two).
#4
Junior Member
Thread Starter
Join Date: Mar 2007
Location: Staten Island, NY
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Camaro Z28
Engine: 350 from an elcamino
Transmission: stock t-5
Axle/Gears: 10 bolt 3.73 limited slip
Re: exhaust system ideas for an 84 camaro
the 2055's have the air tubes for emissions, but im not running any of that on the car. the previous owner removed it, and i only have one more year till im emissions free. how would i remove those, or do they make a set without them?
#6
Junior Member
Thread Starter
Join Date: Mar 2007
Location: Staten Island, NY
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Camaro Z28
Engine: 350 from an elcamino
Transmission: stock t-5
Axle/Gears: 10 bolt 3.73 limited slip
Re: exhaust system ideas for an 84 camaro
is there anyway other than welding?
#7
Moderator
iTrader: (5)
Re: exhaust system ideas for an 84 camaro
Don't know what it would be. Check the following link for pics that show the welds (the paint's wearing now, but originally the welds were difficult to see):
https://www.thirdgen.org/forums/afte...rsion-kit.html
JamesC
https://www.thirdgen.org/forums/afte...rsion-kit.html
JamesC
Trending Topics
#8
Senior Member
iTrader: (2)
Join Date: Dec 2007
Location: Virginia
Posts: 990
Likes: 0
Received 5 Likes
on
5 Posts
Car: 1992 Firebird
Engine: 350TBI
Transmission: 700r4
Axle/Gears: Ford 9in 4.10
Re: exhaust system ideas for an 84 camaro
If you just want headers without the air tubes, get the hooker 2460's with the matching y-pipe.
#9
Supreme Member
iTrader: (13)
Re: exhaust system ideas for an 84 camaro
the 2460's y-pipe is way overpriced. you could always get the 2055's, cut the air tubes off, then just tap the tubes and put some short pipe threaded plugs in it's place. OR...take them to your local muffler shop and have one of the guys there do it for a small price. the 2055's are just such a better header/y-pipe combo than the 2460's.
#10
Junior Member
Thread Starter
Join Date: Mar 2007
Location: Staten Island, NY
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Camaro Z28
Engine: 350 from an elcamino
Transmission: stock t-5
Axle/Gears: 10 bolt 3.73 limited slip
Re: exhaust system ideas for an 84 camaro
the idea of plugging the holes with pipe plugs sounds good. thanks for all the help
#11
Moderator
iTrader: (14)
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes
on
34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Welding the tubes shut is extremely easy to do. Anyone with a wire welder can do it.
Check the pics in my vB Garage.
Check the pics in my vB Garage.
Thread
Thread Starter
Forum
Replies
Last Post
Fast355
DFI and ECM
14
12-02-2016 06:33 PM