Rocker Arm questions.
#1
Member
Thread Starter
Join Date: Mar 2010
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Pontiac Firebird
Engine: 305 TBI L03
Transmission: 700r4
Axle/Gears: 2.73 one wheel drive
Rocker Arm questions.
Hi, i want to know if i can install a set of roller rockers on my stock 305 with l03 heads wich have the factory rockers wich arent rollers. Will 1.6 ratio not work, im kinda loss, dont know wich to buy and were, can any of u guys tell me if i can just install a set of roller rockers on my stock engine without having to modify anything else.
#2
Supreme Member
Join Date: Jun 2006
Location: West-Central
Posts: 2,199
Likes: 0
Received 1 Like
on
1 Post
Car: 91 Trans am
Engine: built 360 TBI
Transmission: built 700r4
Axle/Gears: 10bolt/3.23
Re: Rocker Arm questions.
Narrow body full roller rockers will fit with centerbolt valve covers, you may need to mesure if the pushroad lengt needs to be changed.
#3
Member
Thread Starter
Join Date: Mar 2010
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Pontiac Firebird
Engine: 305 TBI L03
Transmission: 700r4
Axle/Gears: 2.73 one wheel drive
Re: Rocker Arm questions.
Thxs, but will i need to modify anything to install 1.6 rockers ? Since they increase valve lift and stock swirl ports i have heard have small valve lift capacity.
#4
Supreme Member
Join Date: Jun 2006
Location: West-Central
Posts: 2,199
Likes: 0
Received 1 Like
on
1 Post
Car: 91 Trans am
Engine: built 360 TBI
Transmission: built 700r4
Axle/Gears: 10bolt/3.23
Re: Rocker Arm questions.
The stock LO3 heads allow up to .470 in lift, safe. The LO3 cam with 1.6 rockers is in the .400 lift area.
I suggest you read the sticky treads, the search function is wery helpful too.
I suggest you read the sticky treads, the search function is wery helpful too.
#5
Supreme Member
Join Date: Dec 2005
Location: Texas City, Texas Area
Posts: 1,244
Likes: 0
Received 1 Like
on
1 Post
Car: 89 RS, 92 Z28
Engine: 305 TBI, 350 TPI
Transmission: 700R4 Both Cars
Axle/Gears: 3.23 Posi.. 4 wheel disc both cars
Re: Rocker Arm questions.
Where is the sticky pertaining to the 1.6 rollers...i can not find it...Thank you, Tom
#6
Supreme Member
iTrader: (27)
Re: Rocker Arm questions.
https://www.thirdgen.org/forums/tbi/...-synopsis.html
I posted cam specs with and without 1.6 rockers. I am personally running 1.6 Comp cam roller rockers on my car with no issues.
I posted cam specs with and without 1.6 rockers. I am personally running 1.6 Comp cam roller rockers on my car with no issues.
#7
Supreme Member
Join Date: Dec 2005
Location: Texas City, Texas Area
Posts: 1,244
Likes: 0
Received 1 Like
on
1 Post
Car: 89 RS, 92 Z28
Engine: 305 TBI, 350 TPI
Transmission: 700R4 Both Cars
Axle/Gears: 3.23 Posi.. 4 wheel disc both cars
Re: Rocker Arm questions.
https://www.thirdgen.org/forums/tbi/...-synopsis.html
I posted cam specs with and without 1.6 rockers. I am personally running 1.6 Comp cam roller rockers on my car with no issues.
I posted cam specs with and without 1.6 rockers. I am personally running 1.6 Comp cam roller rockers on my car with no issues.
Thanks....I seem to have pushrod clearance problems where the pushrods go thru the holes in the head...Is this common on these motors??? Looks like I may have to grind a little bit on each hole...Tom
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
12-10-2019 07:07 PM
New2Chevy
Engine/Drivetrain/Suspension Parts for Sale
2
09-28-2015 12:35 AM