383 stroker what compression ratio for pump gas
#1
Member
Thread Starter
iTrader: (2)
Join Date: Oct 2004
Location: moline, il
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 z28
Engine: 350
Transmission: TH350
Axle/Gears: 10 bolt 3.73
383 stroker what compression ratio for pump gas
im building a 383 stroker with 6" rods with this kit http://cgi.ebay.com/ebaymotors/ws/eB...155158473&rd=1
and i want to run on pump what would be the best compression ratio im going to be using edelebrock pro flo 3500 injection and im trying to decide on a trick flow head combo
and i want to run on pump what would be the best compression ratio im going to be using edelebrock pro flo 3500 injection and im trying to decide on a trick flow head combo
#2
Supreme Member
Join Date: Oct 2006
Posts: 1,974
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 RS
Engine: 350 vortec
Transmission: T-5
Axle/Gears: not the best not the worst
Re: 383 stroker what compression ratio for pump gas
10.5:1 for the street 11:1 if it will never see the street
#3
Junior Member
Join Date: Jun 2007
Location: Baker, Louisiana
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Chev Camaro
Engine: 350
Transmission: Th350
Axle/Gears: 10 bolt 3.23 posi
Re: 383 stroker what compression ratio for pump gas
what type of octane fuel do you need for 11:6.1 ?
#4
Moderator
Join Date: Jul 1999
Location: 51°N 114°W, 3500'
Posts: 17,108
Likes: 0
Received 120 Likes
on
101 Posts
Car: 87 IROC L98
Engine: 588 Alcohol BBC
Transmission: Powerglide
Axle/Gears: Ford 9"/31 spline spool/4.86
Re: 383 stroker what compression ratio for pump gas
As much as needed to eliminate detonation under load. There is no magic number based on a compression ratio since each engine is different.
Some engines can run 92 octane on 12:1, some engines can only do it at 10:1.
Some engines can run 92 octane on 12:1, some engines can only do it at 10:1.
#5
Member
Thread Starter
iTrader: (2)
Join Date: Oct 2004
Location: moline, il
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 z28
Engine: 350
Transmission: TH350
Axle/Gears: 10 bolt 3.73
Re: 383 stroker what compression ratio for pump gas
so would it be best to go for 10.2:1 or 9.6:1 for this it will be a daily driver i dont want to go higher than 93 octane but i dont want any chance of detonation
#6
Senior Member
iTrader: (1)
Join Date: Sep 2007
Location: New Philadelphia/ Canton OH
Posts: 914
Likes: 0
Received 1 Like
on
1 Post
Car: 1991 RS, 84 El Camino conquista RIP
Engine: 5.0 (for now)
Transmission: 4L60
Axle/Gears: 2.xx torsen limited slip & 3.42 ope
Re: 383 stroker what compression ratio for pump gas
9.6:1 is better. the lower the compression usually makes it burn lower octane. best bet it to ask to company you got the kit from or the shop doing it for you.
Thread
Thread Starter
Forum
Replies
Last Post
Mickeyruder
Engine/Drivetrain/Suspension Parts for Sale
3
09-02-2015 02:45 PM