Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!

Anything for cleaning/dissolving RTV off intake?

Old 04-13-2008, 06:05 AM
  #1  
Supreme Member
Thread Starter
iTrader: (1)
 
Ward's Avatar
 
Join Date: Aug 1999
Location: Rowlett, TX
Posts: 2,842
Likes: 0
Received 5 Likes on 5 Posts
Car: 1988 GTA
Engine: 5.0 TPI
Transmission: T5
Axle/Gears: 9 Bolt, 3.45
Anything for cleaning/dissolving RTV off intake?

Today I plan to pull my lower intake off and clean it up good. I didn't originally plan to pull it off, but someone put RTV in the injector bosses, I guess to fix leaking o-rings. The intake was also painted silver (without removing it) and doesn't look all that great. I will probably try soaking it with aircraft stripper, but does anyone know of anything that will eat RTV off? If the stripper doesn't work, then I'll have to spend some time scraping the RTV out of the injector bosses, which doesn't look like much fun.
Old 04-13-2008, 09:11 AM
  #2  
Supreme Member

iTrader: (5)
 
Viprklr's Avatar
 
Join Date: Feb 2002
Location: N. Illinois
Posts: 3,461
Likes: 0
Received 2 Likes on 2 Posts
Car: 92 GTA/ 00 TA
Engine: 383/350
Transmission: 700R4/T-56
Re: Anything for cleaning/dissolving RTV off intake?

I've never heard of anything that actually cleans it off.
Have fun scraping
Old 04-13-2008, 11:16 AM
  #3  
Moderator

iTrader: (1)
 
RBob's Avatar
 
Join Date: Mar 2002
Location: Chasing Electrons
Posts: 18,399
Likes: 0
Received 215 Likes on 201 Posts
Car: check
Engine: check
Transmission: check
Re: Anything for cleaning/dissolving RTV off intake?

The only thing that I know of that dissolves RTV is gasoline, petrol, pump gas. . .

RBob.
Old 04-13-2008, 12:50 PM
  #4  
Supreme Member

iTrader: (1)
 
Sonix's Avatar
 
Join Date: Jul 2004
Location: Calgary, AB, Canada
Posts: 10,763
Likes: 0
Received 4 Likes on 4 Posts
Car: 1982 Trans-Am
Engine: 355 w/ ported 416s
Transmission: T10, hurst shifter
Axle/Gears: 10 bolt, true-trac, 3.73
Re: Anything for cleaning/dissolving RTV off intake?

I was pretty sure RTV was typically un effected by gasoline. I RTV'd around my mechnical fuel pump gasket.

Try laquer thinner, MEK or xylene. Those are the strongest solvents I know of.
Old 04-13-2008, 03:52 PM
  #5  
Supreme Member
Thread Starter
iTrader: (1)
 
Ward's Avatar
 
Join Date: Aug 1999
Location: Rowlett, TX
Posts: 2,842
Likes: 0
Received 5 Likes on 5 Posts
Car: 1988 GTA
Engine: 5.0 TPI
Transmission: T5
Axle/Gears: 9 Bolt, 3.45
Re: Anything for cleaning/dissolving RTV off intake?

Yeah, that's what I was afraid of. I guess I can try the dremel with a wire wheel, hopefully that will speed it up a little. Thanks for the replies guys, I figured it was worth a shot
Old 04-13-2008, 07:24 PM
  #6  
Moderator

iTrader: (1)
 
RBob's Avatar
 
Join Date: Mar 2002
Location: Chasing Electrons
Posts: 18,399
Likes: 0
Received 215 Likes on 201 Posts
Car: check
Engine: check
Transmission: check
Re: Anything for cleaning/dissolving RTV off intake?

Originally Posted by Sonix
I was pretty sure RTV was typically un effected by gasoline. I RTV'd around my mechnical fuel pump gasket.
If a mechanical fuel pump gasket is exposed to gasoline, the pump is leaking.

RBob.
Old 04-13-2008, 09:44 PM
  #7  
Supreme Member

iTrader: (14)
 
//<86TA>\\'s Avatar
 
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes on 42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: Anything for cleaning/dissolving RTV off intake?

it says on every tube of RTV ive ever bought that its not for use where immersed in gasoline. Give it a whirl
Old 04-20-2008, 01:27 AM
  #8  
Supreme Member
Thread Starter
iTrader: (1)
 
Ward's Avatar
 
Join Date: Aug 1999
Location: Rowlett, TX
Posts: 2,842
Likes: 0
Received 5 Likes on 5 Posts
Car: 1988 GTA
Engine: 5.0 TPI
Transmission: T5
Axle/Gears: 9 Bolt, 3.45
Re: Anything for cleaning/dissolving RTV off intake?

Just thought I'd update this thread, in case anyone else has the same problem. A dremel wire cup wheel is the perfect size to get into the injector holes and clean them out. It took about 5 minutes to get every last bit of RTV out of there.

Old 04-20-2008, 01:50 PM
  #9  
Moderator

 
Vader's Avatar
 
Join Date: Jan 2000
Posts: 19,348
Received 215 Likes on 176 Posts
Re: Anything for cleaning/dissolving RTV off intake?

So is a bore brush for a 20 Ga. shotgun, or a cleaning brush used for 1/2" copper sweat fittings.
Old 04-20-2008, 03:55 PM
  #10  
TGO Supporter

 
Air_Adam's Avatar
 
Join Date: Oct 2002
Location: Saskatoon, SK, Canada
Posts: 9,067
Likes: 0
Received 1 Like on 1 Post
Car: '83 Z28, '07 Charger SRT8
Engine: 454ci, 6.1 Hemi
Transmission: TH350, A5
Axle/Gears: 2.73 posi, 3.06 posi
Re: Anything for cleaning/dissolving RTV off intake?

Use some strong thinner, a VERY sharp new razor, and a lint free rag (shop towels for example), and it should come off fairly easy.
Old 04-20-2008, 08:13 PM
  #11  
Supreme Member

iTrader: (3)
 
1989GTATransAm's Avatar
 
Join Date: Sep 2003
Location: Cypress, California
Posts: 6,859
Received 14 Likes on 14 Posts
Car: 1989 GTA
Engine: 369 TPI
Transmission: 4L60E
Axle/Gears: 3.70 Nine Bolt
Re: Anything for cleaning/dissolving RTV off intake?

I have had some luck with carburetor cleaner. That is with Permatex #2 which is a silicone variety.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
customblackbird
Power Adders
71
10-01-2015 04:30 PM
85 Jimmy
TPI
3
09-30-2015 07:56 AM
Bubbajones_ya
Cooling
23
09-14-2015 08:38 PM
toronto formula
Engine/Drivetrain/Suspension Parts for Sale
3
09-10-2015 07:31 AM
e3pres
Engine/Drivetrain/Suspension Parts for Sale
1
09-09-2015 01:51 PM


Thread Tools
Search this Thread
Quick Reply: Anything for cleaning/dissolving RTV off intake?



All times are GMT -5. The time now is 07:07 AM.