ok bought an HEI distributor how do i hook it up?
06-16-2009, 10:32 PM
#1
Senior Member
Thread Starter
Join Date: Jun 2008
Location: Corning NY
Posts: 660
Likes: 0
Received 1 Like
on
1 Post
Car: 86' IROC
Engine: 388
Transmission: Built 700r4
Axle/Gears: 3.08 non-posi
ok bought an HEI distributor how do i hook it up?
I bought one of the summitracing HEI distributors with the built in coil in the cap.
found here:
http://www.summitracing.com/parts/SUM-850001-2/
do i need the 2 wire connector or the single wire connector and where do i hook up my autometer tach? Im thinking i need the dual wire b/c of the ignition and tach...
2 wire connector:
http://www.summitracing.com/parts/ACC-170072/
single wire connector:
http://www.summitracing.com/parts/SUM-G5210/
thanks chas
found here:
http://www.summitracing.com/parts/SUM-850001-2/
do i need the 2 wire connector or the single wire connector and where do i hook up my autometer tach? Im thinking i need the dual wire b/c of the ignition and tach...
2 wire connector:
http://www.summitracing.com/parts/ACC-170072/
single wire connector:
http://www.summitracing.com/parts/SUM-G5210/
thanks chas
Last edited by chas0218; 06-16-2009 at 10:41 PM.
06-17-2009, 07:00 AM
#2
Supreme Member
Re: ok bought an HEI distributor how do i hook it up?
You want the dual connector. The red wire goes to a switched ignition source. The other one goes to your tach.
06-17-2009, 01:16 PM
#4
Moderator
Join Date: Jul 1999
Location: 51°N 114°W, 3500'
Posts: 17,106
Likes: 0
Received 120 Likes
on
101 Posts
Car: 87 IROC L98
Engine: 588 Alcohol BBC
Transmission: Powerglide
Axle/Gears: Ford 9"/31 spline spool/4.86
Re: ok bought an HEI distributor how do i hook it up?
You need a fairly heavy wire for the switched power source. Something like 10 gauge. No thinner than 12 so don't attach a thinner wire to the pigtail.
06-17-2009, 01:31 PM
#5
Member
Join Date: Feb 2009
Location: central Louisiana
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 Firebird T-Top
Engine: 350 crate
Transmission: 700r4 w/shift kit
Axle/Gears: one's that move the car
Re: ok bought an HEI distributor how do i hook it up?
summit also has the adapter wire for power and tach..it plugs into your old one an then to the new dizzy so there is no splicing
Thread
Thread Starter
Forum
Replies
Last Post
91, camaro, connector, distributor, distributors, hei, hook, hooking, pigtail, tach, tachometer, wire, wires, wont, work
