Moving an engine
#1
Member
Thread Starter
iTrader: (2)
Join Date: Apr 2006
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Moving an engine
So I found a 350 for my latest project for sale locally. I've got a buddy with a big pickup and an engine stand waiting at home. Just wondering what the best way to load and unload this engine would be, as well as the best way to secure it for the ride. It's an in town ride so shouldn't be far. I don't have a cherry picker at the house, and I really dont think we can lift a 600 pound monster just the two of us. Any suggestions?
#2
Senior Member
iTrader: (2)
Re: Moving an engine
If you get a couple buddies to help you move it, it can be loaded and unloaded that way. Spend the money on a cherry picker- it's well worth the $150....typically you can find a used one on craigslist for 1/2 that.
If your buddy has tie downs in his bed, use rope to secure it front/back and side to side. Use some wood to keep it level....do NOT support it on the crank snout/balancer, or flexplate. Just use the oil pan.
I transported one home once in a Blazer once- used the back seat and tailgate to keep it locked in place, and a small metal tackle box to support the 'front' under the oil pan.
If your buddy has tie downs in his bed, use rope to secure it front/back and side to side. Use some wood to keep it level....do NOT support it on the crank snout/balancer, or flexplate. Just use the oil pan.
I transported one home once in a Blazer once- used the back seat and tailgate to keep it locked in place, and a small metal tackle box to support the 'front' under the oil pan.
#3
Member
Thread Starter
iTrader: (2)
Join Date: Apr 2006
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Re: Moving an engine
If you get a couple buddies to help you move it, it can be loaded and unloaded that way. Spend the money on a cherry picker- it's well worth the $150....typically you can find a used one on craigslist for 1/2 that.
If your buddy has tie downs in his bed, use rope to secure it front/back and side to side. Use some wood to keep it level....do NOT support it on the crank snout/balancer, or flexplate. Just use the oil pan.
I transported one home once in a Blazer once- used the back seat and tailgate to keep it locked in place, and a small metal tackle box to support the 'front' under the oil pan.
If your buddy has tie downs in his bed, use rope to secure it front/back and side to side. Use some wood to keep it level....do NOT support it on the crank snout/balancer, or flexplate. Just use the oil pan.
I transported one home once in a Blazer once- used the back seat and tailgate to keep it locked in place, and a small metal tackle box to support the 'front' under the oil pan.
#5
Member
iTrader: (3)
Join Date: Aug 2008
Location: FL
Posts: 207
Likes: 0
Received 3 Likes
on
2 Posts
Car: 1989 Camaro RS
Engine: V6 - LS Swap Incoming
Transmission: 700R4 - T56 Mag F Incoming
Axle/Gears: 3.42
Re: Moving an engine
If you putting it in a truck get a 17 or 18 inch junk tire off the rim from a tire place they'll give you one if you tell them what your using it for since they don't have to dispose of it then. When you move the engine places the oil pan in the middle of the tire and set the engine down. The tire wall will flex and support the engine holding it still. Tie the ropes to keep the engine from swaying side to side and you'll be good to go. That's how I move all my engines. I have a 18 inch bald tire thats only purpose is to cradle engines during hauiling. in the pickup truck.
Hope that helps.
Hope that helps.
#6
Guest
Posts: n/a
Re: Moving an engine
If you putting it in a truck get a 17 or 18 inch junk tire off the rim from a tire place they'll give you one if you tell them what your using it for since they don't have to dispose of it then. When you move the engine places the oil pan in the middle of the tire and set the engine down. The tire wall will flex and support the engine holding it still. Tie the ropes to keep the engine from swaying side to side and you'll be good to go. That's how I move all my engines. I have a 18 inch bald tire thats only purpose is to cradle engines during hauiling. in the pickup truck.
Hope that helps.
Hope that helps.
#8
Re: Moving an engine
So I found a 350 for my latest project for sale locally. I've got a buddy with a big pickup and an engine stand waiting at home. Just wondering what the best way to load and unload this engine would be, as well as the best way to secure it for the ride. It's an in town ride so shouldn't be far. I don't have a cherry picker at the house, and I really dont think we can lift a 600 pound monster just the two of us. Any suggestions?
#10
Junior Member
Join Date: Sep 2009
Location: Virginia
Posts: 95
Likes: 0
Received 3 Likes
on
3 Posts
Car: 1990 Iroc, 1984 Buick Regal
Engine: 5.7, ZZ4 crate w/FIRST injection
Transmission: 700r4, 700r4
Axle/Gears: 3.73, 4.11
Re: Moving an engine
I use a 245/75/16 load range E tire... This is the best way...
#11
Member
iTrader: (1)
Re: Moving an engine
I did read that the OP has a engine STAND. I still encourage anyone who rebuilds thier engine to invest in an engine cradle. It allows you to move the engine around (including transporting to/from machine shop) without damage.
The tire way may work, but I'm not trusting my 1k+ engine to a tire.
The tire way may work, but I'm not trusting my 1k+ engine to a tire.
#12
Member
Join Date: Apr 2008
Location: Minnesnowta
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Camaro Z28
Engine: 355ci, XE262 , 650dp
Transmission: T-5, RAM clutch
Axle/Gears: 3.23 limited slip
Re: Moving an engine
make a cradle out of wood... its easy, cheap, and will work fine as long the oil filter is off.
to the OP for wanting to do the work yourself
to the OP for wanting to do the work yourself
#13
Supreme Member
iTrader: (34)
Join Date: Jul 2002
Location: Stamford, New York
Posts: 1,983
Likes: 0
Received 6 Likes
on
3 Posts
Car: 80 SE/TTA;88 T/A GTA;86 T/A
Engine: 4.9L Turbo; LT1; empty
Transmission: TH350; T56; empty
Axle/Gears: 3:23 disk; 4:10 disk ; 3.42 disk
Re: Moving an engine
three guys and the back of my sunfire, interesting time moving an engine from Long Island to upstate new york (4 hr drive). 4 guys should be able to handle it, but a cherry picker is golden in these situations. If anything, 3 guys and put a 2X6 board diagonally on the tail gate and slide it down slowly so its not a free carry.
#14
Member
Thread Starter
iTrader: (2)
Join Date: Apr 2006
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Re: Moving an engine
Well to all those involved thanks for the info! We got it loaded complete with a tire and tie downs with no issues. Unloading it however was a different story. We ended up breaking the alternator bracket, but otherwise it come out unscathed! When I get ready to move it after tear down for machine work, I likely will go with both the engine stand and the 2x6. As I stated before, I want to do as much as possible on my own, and thanks for the great advice !
#15
Moderator
Join Date: Jul 1999
Location: 51°N 114°W, 3500'
Posts: 17,107
Likes: 0
Received 120 Likes
on
101 Posts
Car: 87 IROC L98
Engine: 588 Alcohol BBC
Transmission: Powerglide
Axle/Gears: Ford 9"/31 spline spool/4.86
Re: Moving an engine
I normally put an engine onto a tire when in the back of a pickup truck but a cradle made from a bunch of 2x4's is very easy to make. The cradle I built many years ago still has a 400 block sitting on it.
#16
Guest
Posts: n/a
Re: Moving an engine
If you leave a bad tire in the bed of your pickup while you're in the salvage yard, cool. But a wooden cradle may get stolen. Many salvage yards can get you another tire for a couple of dollars if yours gets stolen.
For salvage yard finds, the tire is good enough. On the trip home from the machine shop, that's when I could see using a cradle of some sort, though I've done fine with my bad tire.
For salvage yard finds, the tire is good enough. On the trip home from the machine shop, that's when I could see using a cradle of some sort, though I've done fine with my bad tire.
#17
Re: Moving an engine
Well to all those involved thanks for the info! We got it loaded complete with a tire and tie downs with no issues. Unloading it however was a different story. We ended up breaking the alternator bracket, but otherwise it come out unscathed! When I get ready to move it after tear down for machine work, I likely will go with both the engine stand and the 2x6. As I stated before, I want to do as much as possible on my own, and thanks for the great advice !
you are a wise man understanding that a used engine should be torn down and sent to the machine shop.
Thread
Thread Starter
Forum
Replies
Last Post
Black89TA
Exterior Parts for Sale
9
07-23-2016 10:42 AM
AkDrifted
Engine/Drivetrain/Suspension Parts for Sale
6
08-17-2015 07:45 PM