With 383, How much power will I have
#1
Senior Member
Thread Starter
Join Date: Feb 2008
Location: Orland Park,IL
Posts: 634
Likes: 0
Received 1 Like
on
1 Post
Car: Chevrolet Camaro IROC-Z,96 Vette
Engine: 350 5.7 Liter
Transmission: 700r
With 383, How much power will I have
Well I rebuilt the motor over the winter and after 3k in parts and etc I blew the motor on the dyno. Havent torn the motor nor will I be since my dad is mad haha I think I broke a lifter and blew a headgasket since the exhaust was not opening on cylinder #1. Coolant got in oil and was running for a little bit bearings are unknown and car runs on around 5-6 cylinders. I want to make it a 383 now stroker so heres what I have done so far.
Comp 503 cam
Patriot 190cc Aluminum heads
1:6 roller rockers
7/16 pushrods
Headman headers
Stealth Ram Intake
30lb fuel injectors
Holley Fuel rail
Walbro Fuel pump
Cap and rotor
8.5mm wires
stock pistons
3:73 rear gears
I want to stroke it and wonder how much hp I should have around and 1/4 mile times.
Thanks
Comp 503 cam
Patriot 190cc Aluminum heads
1:6 roller rockers
7/16 pushrods
Headman headers
Stealth Ram Intake
30lb fuel injectors
Holley Fuel rail
Walbro Fuel pump
Cap and rotor
8.5mm wires
stock pistons
3:73 rear gears
I want to stroke it and wonder how much hp I should have around and 1/4 mile times.
Thanks
#2
Senior Member
Join Date: May 2006
Location: NY
Posts: 581
Likes: 0
Received 0 Likes
on
0 Posts
Car: 00 SSEi / 94 C4
Engine: 231 / 383
Transmission: 4T65E / ZF 6sp
Axle/Gears: 2.93 / Dana 44 3:45
Re: With 383, How much power will I have
you need to give the combustion CC's ???
Headman FL or shorty??? what about the rest of the exhaust???
2 or 4 valve relief pistons ??
"7/16 NO" pushrods, FP, cap, rotor add nothing
zero deck 383???
gasket thickness???
so far I'll give you 360 - 400 <> 12 range 113 - 116
Headman FL or shorty??? what about the rest of the exhaust???
2 or 4 valve relief pistons ??
"7/16 NO" pushrods, FP, cap, rotor add nothing
zero deck 383???
gasket thickness???
so far I'll give you 360 - 400 <> 12 range 113 - 116
Last edited by 88gta3508; 09-06-2011 at 07:38 PM.
#3
Senior Member
Join Date: Jan 2005
Location: Port Angeles, Wa
Posts: 783
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1983 Camaro Z28
Engine: 584
Transmission: TSI Glide
Axle/Gears: Quick performance 9 inch
Re: With 383, How much power will I have
What kind of times do you want from the car that is the better question
#4
Senior Member
Thread Starter
Join Date: Feb 2008
Location: Orland Park,IL
Posts: 634
Likes: 0
Received 1 Like
on
1 Post
Car: Chevrolet Camaro IROC-Z,96 Vette
Engine: 350 5.7 Liter
Transmission: 700r
Re: With 383, How much power will I have
you need to give the combustion CC's ???
Headman FL or shorty??? what about the rest of the exhaust???
2 or 4 valve relief pistons ??
"7/16 NO" pushrods, FP, cap, rotor add nothing
zero deck 383???
gasket thickness???
so far I'll give you 360 - 400 <> 12 range 113 - 116
Headman FL or shorty??? what about the rest of the exhaust???
2 or 4 valve relief pistons ??
"7/16 NO" pushrods, FP, cap, rotor add nothing
zero deck 383???
gasket thickness???
so far I'll give you 360 - 400 <> 12 range 113 - 116
I want the car to run low 12s if possible with a 383 mid 11.
Thread
Thread Starter
Forum
Replies
Last Post
sailtexas186548
Problems / Help / Suggestions / Comments
2
08-24-2015 10:11 PM