What years are my intakes from???
#1
Supreme Member
Thread Starter
iTrader: (1)
Join Date: Feb 2000
Location: Norfolk, VA. USA
Posts: 7,964
Likes: 0
Received 3 Likes
on
3 Posts
Car: 86 Trans Am, 88 Formula
Engine: 95LT4, 305TPI
Transmission: T56, T5
What years are my intakes from???
I have 2 TPI intakes and was just wondering what years they are from.
The casting #'s on the intakes are:
10088015
14081005
My heads have the following #'s
86 LG4 heads 14014416
87 305 heads 14101081
Just wanted to know which intake I should use, I am about to put the 87 305 heads on my car.
Also, I am looking for the fuel line that goes from the chassis to the fuel rail, the one that has rubber hoses on the bottom and metal tubing at the top that attaches to the fuel rail.
Thanks,
High Speed Run: 157mph
Best 1/4 mile run: 14.94@91.67mph
WS6 Trans Am.
View My Ride @ thirdgen.org
The casting #'s on the intakes are:
10088015
14081005
My heads have the following #'s
86 LG4 heads 14014416
87 305 heads 14101081
Just wanted to know which intake I should use, I am about to put the 87 305 heads on my car.
Also, I am looking for the fuel line that goes from the chassis to the fuel rail, the one that has rubber hoses on the bottom and metal tubing at the top that attaches to the fuel rail.
Thanks,
High Speed Run: 157mph
Best 1/4 mile run: 14.94@91.67mph
WS6 Trans Am.
View My Ride @ thirdgen.org
#2
Supreme Member
Join Date: Jan 2001
Location: PA
Posts: 1,978
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 Firebird WS6
Engine: 350 TPI
Transmission: T56
Axle/Gears: 3.42
<font face="Verdana, Arial" size="2">Originally posted by Zepher:
I have 2 TPI intakes and was just wondering what years they are from.
The casting #'s on the intakes are:
10088015
14081005
My heads have the following #'s
86 LG4 heads 14014416
87 305 heads 14101081
Just wanted to know which intake I should use, I am about to put the 87 305 heads on my car.
Also, I am looking for the fuel line that goes from the chassis to the fuel rail, the one that has rubber hoses on the bottom and metal tubing at the top that attaches to the fuel rail.</font>
I have 2 TPI intakes and was just wondering what years they are from.
The casting #'s on the intakes are:
10088015
14081005
My heads have the following #'s
86 LG4 heads 14014416
87 305 heads 14101081
Just wanted to know which intake I should use, I am about to put the 87 305 heads on my car.
Also, I am looking for the fuel line that goes from the chassis to the fuel rail, the one that has rubber hoses on the bottom and metal tubing at the top that attaches to the fuel rail.</font>
The intake 14081005 is for 85 or 86 TPI's with the standard head bolt pattern (90 degree)
The next intake I am pretty sure is a 87-88 TPI with canted center angles and the cold start passage w/ integral EGR (Camaro/Firebird)
I'm not too sure about the heads exept for what you already know about them... The LG4's might have a bigger cumbustion chamber size since they have lower compression (also due to the dished pistons)
------------------
'88 Camaro RS 2.8L
'88 Formula 350 (Too many mods to list...)
#3
Supreme Member
Thread Starter
iTrader: (1)
Join Date: Feb 2000
Location: Norfolk, VA. USA
Posts: 7,964
Likes: 0
Received 3 Likes
on
3 Posts
Car: 86 Trans Am, 88 Formula
Engine: 95LT4, 305TPI
Transmission: T56, T5
Thanks,
I test fitted the 87-88 Intake on the
87 heads and they seem to match.
The 87 heads have a smaller chamber which should bring my compression up a little.
Shouldn't be too long now till I get this puppy running.
I test fitted the 87-88 Intake on the
87 heads and they seem to match.
The 87 heads have a smaller chamber which should bring my compression up a little.
Shouldn't be too long now till I get this puppy running.
Thread
Thread Starter
Forum
Replies
Last Post
Fast355
DFI and ECM
14
12-02-2016 06:33 PM
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
20
11-14-2015 12:02 AM