700r4 wont shift 3-4
#1
Banned
Thread Starter
iTrader: (5)
Join Date: May 2011
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
700r4 wont shift 3-4
91z was shifting into third and forth wont now.(plugs were fouled)Black)Took for atest drive .Was fine for a few miles.then droped out of forth.It shifs but like it shifts into neutral.3,4.........Have 1,2 but that it.not like computer cars. (Put new motor in very over stock!)Please help
#4
Senior Member
Join Date: Mar 2003
Location: vacaville,ca
Posts: 847
Likes: 0
Received 3 Likes
on
3 Posts
Car: 1988 camaro z28,1997 camaro lt1
Engine: 355 afr 195 heads,tpis big mouth
Transmission: 700r-4 built by me 3-4 z pack
Axle/Gears: 3.42
Re: 700r4 wont shift 3-4
Do you have third if not the 3-4 clutch pack is no good
#5
Re: 700r4 wont shift 3-4
yup
so it's rebuild time
do a search on this site (that's a hint) and any other site where the 700r4 or 4l60/e are discussed and you will see no 3rd or 4th is very common
It's your transmissions way of saying it wants you to spend money
so it's rebuild time
do a search on this site (that's a hint) and any other site where the 700r4 or 4l60/e are discussed and you will see no 3rd or 4th is very common
It's your transmissions way of saying it wants you to spend money
#6
Junior Member
Join Date: Jun 2011
Location: Michigan
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird Formula 350
Engine: 350
Transmission: 700-R4
Axle/Gears: 3.27
Re: 700r4 wont shift 3-4
happened to mine too. after about 50 miles on the new rebuild trans, 3-4 didn't work. the band broke to go in 3rd gear. so i needed a new trans or rebuild the one i had. if they are not rebuilt right, or been sitting awhile like mine did before it got used. bands break very easily. did it shift really hard through all the gears? mine did, way too hard. got my transmission for $100 and it works even better than the new rebuild one.
#7
Re: 700r4 wont shift 3-4
happened to mine too. after about 50 miles on the new rebuild trans, 3-4 didn't work. the band broke to go in 3rd gear. so i needed a new trans or rebuild the one i had. if they are not rebuilt right, or been sitting awhile like mine did before it got used. bands break very easily. did it shift really hard through all the gears? mine did, way too hard. got my transmission for $100 and it works even better than the new rebuild one.
you are the exception and not the rule
$100 transmissions tend to be just that; $100 transmissions
Trending Topics
#9
Re: 700r4 wont shift 3-4
many who feel the onset of transmission slippage will install a shift kit on the advice of their inexperienced friends. Others will change the tranny fluid and filter. Both are desperation plays trying to ignore the obvious
good luck
Thread
Thread Starter
Forum
Replies
Last Post
Dragonsys
Engine/Drivetrain/Suspension Parts for Sale
2
09-25-2015 03:51 PM
[CA] 700R4 trans & parts
6998poncho
Engine/Drivetrain/Suspension Parts for Sale
0
09-25-2015 02:56 PM