Transmission gurus- 700r4 tcc solenoid with harness... which one
#1
Junior Member
Thread Starter
iTrader: (2)
Join Date: Apr 2010
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Transmission gurus- 700r4 tcc solenoid with harness... which one
No such thing as free. I was given a transmission for a project, but the tcc solenoid with harness was taken from it as well as a pressure switch. When I got the unit, It had a harness tossed in as well as a switch. The trans was removed from a 1990 chevy p/u, but had been built before and I'm not sure its the original trans from the truck to begin with.
All I'm lacking is the tcc solenoid with harness, and possibly the 3/4 pressure switch. I have put a picture of the valve body with the switch in question. disregard the harness thats on it. the switch is a 2 pin switch FWIW.
This is going on a 89 TPI setup as well.
I will gladly paypal 10.00 to the person who can give me the answer i need
All I'm lacking is the tcc solenoid with harness, and possibly the 3/4 pressure switch. I have put a picture of the valve body with the switch in question. disregard the harness thats on it. the switch is a 2 pin switch FWIW.
This is going on a 89 TPI setup as well.
I will gladly paypal 10.00 to the person who can give me the answer i need
#4
Junior Member
iTrader: (2)
Join Date: Mar 2009
Location: Michigan
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Pontiac Trans Am GTA
Engine: 5.7L L98
Transmission: 700R4
Axle/Gears: 3.27:1
Re: Transmission gurus- 700r4 tcc solenoid with harness... which one
If you need the whole harness you'll have to go to your local transmission shop (or dealer/bone yard) to get one. If you just need the solenoid you can pick one up at the parts store and splice it in. The pressure switch you show is fine. I'm guessing the trans in the picture is not yours because it has the components you say you are lacking. Hope this helps.
#5
Junior Member
Thread Starter
iTrader: (2)
Join Date: Apr 2010
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Re: Transmission gurus- 700r4 tcc solenoid with harness... which one
If you need the whole harness you'll have to go to your local transmission shop (or dealer/bone yard) to get one. If you just need the solenoid you can pick one up at the parts store and splice it in. The pressure switch you show is fine. I'm guessing the trans in the picture is not yours because it has the components you say you are lacking. Hope this helps.
The problem with the dealer is they need year make model etc. They make like 11 different ones. I've been to two different trans shops and no luck. ( they suck around here)
#6
Supreme Member
Join Date: Jul 1999
Location: Calimesa, California, U.S.
Posts: 3,458
Likes: 0
Received 39 Likes
on
27 Posts
Re: Transmission gurus- 700r4 tcc solenoid with harness... which one
Use the wiring and the single prong (normally open) switch from the 1989 unit along with the temp switch that bolts to the valve body. The input shaft is not a V-8 setup. If it is, then this will not work in a V-8 setup. Is this a "small bellhousing" type?
#7
Junior Member
Thread Starter
iTrader: (2)
Join Date: Apr 2010
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Re: Transmission gurus- 700r4 tcc solenoid with harness... which one
got a pay pal addy?
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
12-10-2019 07:07 PM
Zeek1041
Theoretical and Street Racing
12
09-30-2015 11:00 AM