PAIMON

i want to get my painted
i was just wondering any if any of you have done that and around how much you paid or what would be a good price

i just want them all black and maybe another color for the out line

i dont want to do them my self cause i dont want to **** up or not do a good job and paint them all crappy

alexsholly

i havent had a body shop do it but my dad painted sum rims for a 91 prelude and it looks good. just make sure they use the right paint or if u do it use the right paint it cost like $100 for a gallon.

V8ReiMeR88MaRo

iTrader: (2)

You can do it with a rattle can also if you do it right much cheaper but be sure you wet sand your wheels or it will just flake off and be a waste of time and money.

I did my recessed headlight area black like the z28s in july and there still perfect. it has with stood everything from sand to a** loads of rain and right not theres about 8 inches of snow and an inch of ice on my car i went out about 20 mins ago and knocked some of the ice and snow off and it still looks good.

But be sure to use good rattle can paint like the five to seven dollar stuff though. O'Rileys has duplicolor for about six bucks around here. Don't use that crappy 2 dollar crap

GL hope to see what they look like when your finished

tnitz8787

you might look into powdercoat.it will last forever

Stephen

iTrader: (12)

Had my wifes crosslaces painted yellow to match her stripes, at the same time the whole car was repainted.


And I had my rear 2 Snypers powder coated black, when I had them widened from 9" to 11".

wanab03ss

iTrader: (20)

how much did it cost to have the rims widened? I always wanted a 10" wide gta rim

RU1NER

iTrader: (1)

Don't worry he'll tell you. He's very proud of them : )

Stephen

iTrader: (12)

Wouldn't you be?

Not much sense in having 16's widened for street tires. All the street tires(like the BFG 295/50) will fit them perfectly fine. Been there & done that myself.

It was $200 per wheel (up to 3"). $150 if I supplied the donor wheel for widening. And the powder coating was $100 per wheel.

RU1NER

iTrader: (1)

Ya i'm a bit jealous

flrtin1

You may want to look into powder coating, there are a ton of custom coaters in your area. Powder has a lot of advantages to paint and should be cheaper. Anything that can be done in paint on rims can be done in powder, here are some examples I have done in the past year

Satin black centers, Gloss black lip, Red stripe


Black metallic Chrysler 300 body color/Red lettering

flrtin1

Weld pro stars Clear on polish/Satin Black





Billet Specialtys....Clear on Polish/Satin Black

flrtin1

Gloss Black/Gloss Red

92RS(real slow)

now that is sick what rims are those boze?

ellocojorge

iTrader: (1)

they look like foose

flrtin1

I am not sure what they are, I didnt see a name on them....... they were tore up a little (curb rash) and in pretty crappy shape. He also wanted the backs of the spokes and hub in red for contrast when viewed through the spokes ....they are going on a bagged, mini tubbed S-10

PAIMON

so what would be a good price for the powder coating
probably just all black and maybe red around the rim

SiCkRs

iTrader: (6)

flrtin1 if you do powdercoating how much do you charge for some ss zr1 wheels
sorry paimon dont want to hijack your thread

flrtin1

I only do coating in our local metro area, I dont do any mail order but if you want a referance to general pricing for custom coating we have a price list on our web site,

To do the red and black you should be paying around $85 for two stage and $20 masking so $105 per rim plus stripping if needed.

SiCkRs

iTrader: (6)

I just want some gloss black how much would that be

DAREDEVIL 1

base coat clearcoat,,,( painted ) around 150 -200 for all 4 !!!!!!

SiCkRs

iTrader: (6)

Ok thank you

92z28camarokid

iTrader: (4)

There is a place down here that was doin 25 per wheel. Make sure u shop around. With today's economy u might be able to cut a deal. Just make sure u shop around

JeremyNYR

iTrader: (2)

What would be recommended for crosslace rims? My painter was hesitant to paint them since there are so many little nooks to get into. I wanted to have the crosslaces match my paint, but it has a course metallic flake in it. Can that be matched with Powder Coating?

flrtin1

Just remember as with anything service related........you are going to get the quality you are willing to pay for.

flrtin1

Any professional coater with a high end coating system will have no problem with nooks and crannys. As far as metallics thats mostly what we shoot and 95% of the time we can match a color (our supplier has over 6500 colors).....I just finished a set of 03 Cobra valve covers matching the Ford factory Sun Fire Red color and recently perfectly matched on a set of rims the Chrysler 300 Black Metallic, both of those colors are high end metallics. Any good custom coater in your area should have no problem.

JeremyNYR

iTrader: (2)

Very cool. I had no idea that you could get a metallic flake in a powdercoat until today. What would you expect to pay a good shop to match a metallic color on crosslace rims?

flrtin1

since any metallic powder has to have a clear powder top coat, it would be a two stage job (and assuming no polished lip) I would expect it to be in the
$85-$95 range for each rim plus stripping if needed (we charge $20 per rim for chemical stripping)

flrtin1

Just to add, powder has come a long way just in the last couple of years......I can use all of the HOK pearls and flake in the powder just the same as in paint, our supplier offers exact paint to powder color matching using a sample piece with the paint color on it, there are illusion and flip powder colors that are as good as any paint I have seen also.

Here is a fatboy rim that I did in a color called Tropic Black....it is a brilliant green metallic to bronze to black flip (very hard to get pictures of how awesome this flips)

matts86cam

iTrader: (1)

still doing the trial and error on mine, only have about 30 bucks in it so far (not to mention about 20 hours of elbow grease) but you should have seen these things before. Rusted, one gold, one gray its hard to tell in this pic but the aluminum on the front is close to mirror. Of course its not chrome but aluminum will shine enough to see your reflection in it.

JeremyNYR

iTrader: (2)

Flirtin1, I'm really amazed by that! I have polished the lip already on 2 of my rims and roughed up the painted section in preparation for paint. Does Aircraft Stripper get the job done to remove the paint and have it ready for powder, or is an industrial chemical stripper required? Can a shop just tape off the already polished lip to do the powdercoating on the center section only?

flrtin1

Yes the aricraft stripper (walmart) will work, what they sell is a very watered down version of what we have in a bulk tank, so it takes a lot more time/effort to do it that way but it will work. As far as the polished lip there is usally a additional masking charge per rim that will vary depending on long/hard it take to mask the area you want left polished. The final stage of clear powder should be applied after the masking is removed so you wind up with even the polished areas covered with clear which is nice for no more polishing

flrtin1

Here is a example of a polished lip rim we did.....has the gloss black on the center but has clear over the whole thing

grassyflats

what would be a good price to powdercoat
four wheels with five windows?
powdering just the out lines of the windows
like stock 91-92 Z28 rims

cavazos31

iTrader: (4)

Nice! I was wondering if you could put clear powdercoat over polished aluminum rims. (to protect them from brake dust and what not) If I had polished rims powdercoated clear, would I be able to remove the clear down the road, if I ever wanted the rims colored? Good work by the way, those are all some pretty wild looking wheels!

To the original question, I had my rims painted to match my car years back (when I had my car painted) and they came out real nice. But the first time I had my tires changed, the jerks managed to chip each and every rim! The paint was thick enough that touch ups looked horrible, so I just stripped them and spray painted them silver/grey. Not sure of the cost since they painted them with the car, but it has to be more expensive then the powdercoating prices listed. I never realized powdercoating was that affordable.

87_TA_GTA

flirtin, i have a question on the rims you painted. Why paint the part that gets covered by the tire? just seems like a waste of materials to me.
that fatboy is really sick. when i first saw the pic i thought the outer part was all black and only the inside was green.

t-top havoc

iTrader: (3)

flrtn1--
That's just purely SEXY!! Beautiful wheels!!

1986iroc350

iTrader: (1)

I painted my rims Black Silver metallic. Stripped the clear coat. Wet sanded. Used 2 coats of rattle can self etching primer. wet sand in between coats. Went to Bens paint supply here in the Orlando area and got Shopline paint. its made by ppg. It cost me about 40.00 for a pint of the Black Silver metallic. sprayed it with a hplv spry gun. 2 coats. and it looks awesome!! Check out the picture i attatched.

1986iroc350

iTrader: (1)

Yup i tried the polishing thing. Looked good. but it was so much work that i couldnt get it shiny enough for my liking so i decided to just paint mine Black Silver Metallic.

flrtin1

I am not sure what you are asking........your best bet would be to do a search for custom coaters in your local area contact several of them and see what the price range is.

flrtin1

By the time you wrap the lip edge around far enough to be past the tire bead you have most of it covered anyway so just a finishing touch, plus on steel rims after they are stripped to bare metal, I do it so if the tire ever gets moisture in it they wont ever rust from the inside and screw the bead seal up.

DAREDEVIL 1

To answer your question.....the powdercoat is a coating that is sprayed on with help of electro magnetic force..then bake'd in the oven. If u wnat it to stay on there it has to be seamless !!!!
Thats why.
flrtin1 NICE JOB by the way !!!!!!

DAREDEVIL 1

flirtin1.....i ahve a question though......have u ever had problems with older aluminum, steel or other mat...rims, gasing out ??
If so, what did u do to get rid of it or prevent it from happening ??

Scott