Weld RTS Rims
#1
Weld RTS Rims
I've had Weld Prostars on my car since 2001. They were great rims and still looked good but I wanted something different so I bought some Weld RTS rims. 15x4.25 on the front and 15x8.25(4.5in backspacing) on the rear. I'm happy with how they look, I think it gives the car a more modern drag car look. The pics really don't do it justice but you get the idea. I'll get some better ones next weekend at the NMCA/LSX event.
#3
Supreme Member
iTrader: (3)
Join Date: Jul 2009
Location: Chicago, IL
Posts: 1,311
Likes: 0
Received 3 Likes
on
3 Posts
Car: 1986 Pontiac Firebird
Engine: 97 LT1 W/ Alot of goodies.
Transmission: 4L60E W/ Yank SS3600
Axle/Gears: 3.27 9 Bolt BW
Re: Weld RTS Rims
Looks good. I have not seen these on 3rd gens yet. Good style wheel.
If only they cleared ls1 brakes. I frankly dont like mismatched sized wheels.
If only they cleared ls1 brakes. I frankly dont like mismatched sized wheels.
#4
Senior Member
Re: Weld RTS Rims
lookin sweet. i'll be in a need for a set here very soon. how much did they set you back? $$
#5
Re: Weld RTS Rims
http://jimsracingtires.com/
#7
COTM Editor
iTrader: (11)
Join Date: Mar 2006
Location: WINDSOR, CO
Posts: 4,098
Likes: 0
Received 12 Likes
on
12 Posts
Car: 91 Z28, 87 SC, 90 IROC, 92 RS
Engine: LS1, 305 TPI, L98, NADA
Transmission: T56, 700r4's, and NADA
Axle/Gears: 3.89, 3.42, 3.23, NADA
Re: Weld RTS Rims
I thought I loved your car before.... Holy shiznit those look great on there. Pretty sure you have my favorite SC on the site.
I honestly would love to see those in 18x10 on your car.
I honestly would love to see those in 18x10 on your car.
Trending Topics
#9
Junior Member
Join Date: Jan 2011
Location: Kansas
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Z/28
Engine: 5.7 TPI
Transmission: 700R4
Re: Weld RTS Rims
Those look really sweet on there.......I'll definitely keep those in mind when I decide to change wheels on my Z......
#13
Senior Member
iTrader: (2)
Join Date: May 2006
Location: Elk City OK
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 25th anv z28
Engine: 346 TC78 Turbo
Transmission: 4L80E
Axle/Gears: 3.25 9"Nodular, Strange axles
Re: Weld RTS Rims
I've been eye balling those wheels. They Look good, curious about 17" and 18" on a thirdgen..
#15
Supreme Member
iTrader: (56)
Re: Weld RTS Rims
you can get them to fit any brake set up.
wheels can be orderd to fit any caliper size
low pad
med pad
or High pad
welds lug nuts for this wheel are now 5 in a bag $11.00 ea bag
all the RTS wheels come with stems and cap.
i did the all polished 15x3.5 front &10x15 (6.5) back space back
takes about 1 month for them to make a set.. (my set anyway)
wheels can be orderd to fit any caliper size
low pad
med pad
or High pad
welds lug nuts for this wheel are now 5 in a bag $11.00 ea bag
all the RTS wheels come with stems and cap.
i did the all polished 15x3.5 front &10x15 (6.5) back space back
takes about 1 month for them to make a set.. (my set anyway)
#19
Supreme Member
iTrader: (56)
Re: Weld RTS Rims
the last 3 wheels showed up about 30 min ago. they do look good.
will do a test fit. and look to see what all i have to remove under the car to get them to fit with the 29x12.5 x15 sportsmen.
the sportsmen are just a Tad wider the the Micky ET Streets and 1" taller
ET Streets are 28x12.5x15
the back rims are sold has 10.3 wide. but from outside edg to out side edg runs 11.5 wide. will try to get PIC or two up
UP DATE:after the test fit going to go with swap out to ( 9.275 wide rear wheels)
and the 6.5 back space.
will do a test fit. and look to see what all i have to remove under the car to get them to fit with the 29x12.5 x15 sportsmen.
the sportsmen are just a Tad wider the the Micky ET Streets and 1" taller
ET Streets are 28x12.5x15
the back rims are sold has 10.3 wide. but from outside edg to out side edg runs 11.5 wide. will try to get PIC or two up
UP DATE:after the test fit going to go with swap out to ( 9.275 wide rear wheels)
and the 6.5 back space.
Last edited by articwhiteZ; 10-28-2011 at 12:14 AM.
#20
Supreme Member
iTrader: (56)
Re: Weld RTS Rims
got the 2nd set of wheels in
had to go with a med pad on the front to clear the willwood calipers.
(had a lowpad set) front was a no fit.
rear was allso swapped out for med pad..my boo boo
should have got the new 2nd set with low pads in the back.
the front dish of the wheels with a 6.5 back space. and a 9.275 wide wheel puts the front dish looking the same has my 3.5 wide front wheel.
I like the look of a dish in the front my self.
so now ill order a 15x10 with a 6.5 back space with a low pad.
this should give me a 4" front dish.
but. before i do. ill be test fitting the new wheels. on the car.
with a mock up of a tire side wall.
will try to get a few pics up tonite
this is the front off set..i dont like it. top and lower pic. rim on right 15x9.275 6.5 back space med pad
this is the offset i like or close to it below. 15x10 5.5 back space low pad
front wheel mock up with brakes. bolt on parts below
every thing that would rust under the car. was also gold zink plated .rust free for life! and go's with the oil pan cost for doing this was $60. about 150lbs in parts. rotors are silver Zink plate
had to go with a med pad on the front to clear the willwood calipers.
(had a lowpad set) front was a no fit.
rear was allso swapped out for med pad..my boo boo
should have got the new 2nd set with low pads in the back.
the front dish of the wheels with a 6.5 back space. and a 9.275 wide wheel puts the front dish looking the same has my 3.5 wide front wheel.
I like the look of a dish in the front my self.
so now ill order a 15x10 with a 6.5 back space with a low pad.
this should give me a 4" front dish.
but. before i do. ill be test fitting the new wheels. on the car.
with a mock up of a tire side wall.
will try to get a few pics up tonite
this is the front off set..i dont like it. top and lower pic. rim on right 15x9.275 6.5 back space med pad
this is the offset i like or close to it below. 15x10 5.5 back space low pad
front wheel mock up with brakes. bolt on parts below
every thing that would rust under the car. was also gold zink plated .rust free for life! and go's with the oil pan cost for doing this was $60. about 150lbs in parts. rotors are silver Zink plate
Last edited by articwhiteZ; 12-15-2011 at 11:38 PM.
Thread
Thread Starter
Forum
Replies
Last Post
LiquidBlue
Wheels and Tires
32
12-10-2019 04:06 PM
no green
Engine/Drivetrain/Suspension Parts for Sale
11
01-09-2016 09:22 PM