I was wondering who all is using a SLP or LPE cam with the Juice?? I know they both make different cams but which one is used more. I am adding a few new things to the motor and I am stuck deciding between the two. I have a 350 with SLP runners, Accel base, Afr 190 heads (64cc) and a Nx kit,,,,just cant decide on a cam. Any body using the LPE211?

I have an slp cam. Probably smaller than you would want to use though!!

You may want to look into the LPE 74219 camshaft.

Lift : 0.525" / 0.525"
Dur: 219 / 219
LSA: 112*

That is with 1.5 rockers. With the 1.6 rockers it changes to more like....

Lift : 0.560" / 0.560"
Dur: 221 / 221
LSA: 112*


I am running that in my Corvette right now with 1.6 rockers and I love it. With the full superram setup it pulls all the way to about 5800-6000 effortlessly.

I haven't even had time to tune the car yet and it is now ripping off high 12s @ 108-109 consistently in 90 degree weather and humidity where before in that type of weather it would only pull a 14.2 instead of it's normal 13.8s.