Power AdderGetting a Supercharger or Turbocharger? Thinking about using Nitrous? All forced induction and N2O topics discussed here.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
I don't know about Rayjay. All I know is Garrett(not the same thing is it?). 900 Cfm is enough for 600 ponies. You might have to run more than 8-9 lbs though. Do you have timing control? If you have a box that retards with boost, then your set. Blow away. In the mean time, I've been giving all the turbo guys these web addresses to help out with decision making.
The turbo flows like a garret e-60 and I'm looking for no more then 600 horse I think with race gas I could go as high as 14 psi.
I have a standalone Fuel Managament Computer which is full programable! I also can controls spark and knock retart as well.
Yes, I do have a timing retard featue in the DFI computer!
Thanks for the advise!