Power AdderGetting a Supercharger or Turbocharger? Thinking about using Nitrous? All forced induction and N2O topics discussed here.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
I need to wire up the 2 step feature on my new MSD digital 6 to help me launch my car more consistantly (T56 trans). I plan to run the blue wire from the digital 6 to a clutch pedal mounted micro switch, as well as a shifter mounted micro switch (this will contact the shift handle only when the trans is in 1st). If either micro switch is open, the 1st step doesn't activate. This way the only activation for the 1 step (in my case the launch step) will be when the clutch is to the floor and trans is in 1st. I only plan to have 2 switches inline as I don't want to reactivate the 1st step every time I shift when the clutch goes to the floor as I will shift at an RPM higher than I launch. Now to the hard part. How do I now wire in a relay (or something else?) to deactivate the nitrous system when staging, since it will try and activate since the pedal will be to the floor closing the carb mounted WOT switch. That is where I get lost. I have searched on MSD's site with no real solution, and multiple board and online searches find no similar situations. Anyone that can help me?
