Power AdderGetting a Supercharger or Turbocharger? Thinking about using Nitrous? All forced induction and N2O topics discussed here.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
If I posess the abilities to turn my corvette into a convertibe and a factory looking one, why would it be so hard for me to make a bracket and weld sprockets on something? ..... Seeing is believing yes but just cause you've never seen it doesn't mean it doesn't exist now does it!
I said it was an impossible task, to refer to nobody ever doing it and nobody would think of it, besides yourself. Making a non-existent thing and making it into a existent object.
Quote:
Originally Posted by Jproz1167
Seeing is believing yes but just cause you've never seen it doesn't mean it doesn't exist now does it!
Exactly. We need to see some pictures. Make us believe. There have been over 1,000 views to this thread. How many of them, do you think believe you?? Not many.
This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!
Last edited by kuulkatdadieo; 12-01-2007 at 11:45 PM.
Sponsored Links
Registered users do not see this ad. Click here to register for free!
Look at mcmaster carr, or other power transmission companies. There should be a pre-built component ready to use (talking about the u-joint type coupler).
I've seen some misalignment shaft type setups that use a rubber joint, but they are only rated to a few HP max. If you slot holes to mount the blower you shouldn't need any misalingment devices.
I was thinking more on the lines of how commercial trucks mount gardner denvers and how they use shafts and U-joint to mount them in odd postions or like I said make a short shaft with a flange and connect it to my 3 crankshaft pulley bolts. Then just have the shaft balanced then it would certainly be reliable and definately be spinning fast enough to create boost by running direct drive.
I see Santa will have a couple less stops this year ..... It's the time of the year to be Merry !!!!!!!!!!!! I wouldn't count on the Easter bunny showing up either !!!!!!!! ...... You will all see when I achieve greatness and cause sale to dwindle over at other well known makers of superchargers and I become the next howard hughes ......
Well when my car is finally finished you will be apologizing and be left in pure amazement as I show you a 90.00 supercharger that can crank out as much boost as a well known one. I would have to say from my last race with my friend my car now is good for maybe mid 13's .... show me another 100.00 mod that will make your car 1 second quiker... in a race I used to be behind about 1 to 1 1/2 car lengths behind this 1990 corvette. In our last race I had a good 9 car legths on him and he wasn't cathing up and this was after going from 3.73 gears to 3.08 gears in my car.
Would you like to explain to the class how you got a vacume gauge to read boost cause I really gotta hear this one
I've done it many times. first the vacuume gauge I was using also was designed to read mechanical fuel pumps.
the next vacuume gauge that I had reade -30vacuume and +30psi.
ick man what is that dried man jiz? I'm actually being serious what is that gunk?
That's a paint stick. They're great, they write on anything. I'd avoid the use of profanity or insults guys, I don't want this thread to be locked before the pictures arrive.
understandable and sorry. it was just that was the closest thing I could think of it looking like.
but I'm with you on thinking this doesn't exist. sure a rotary based supercharge would work, and that was what the original design of a rotary was used for but I don't know how well it would work.
So lifting a motor up to do oil pan gaskets isn't major work? how about all thats involved in doing that in itself ... you make it sound like they can get it done in a day and it's not like my car is the only one there.
not really, and if they already have the trans out it becomes even easier in my opinion, same with the rear main. I did say if they were actually working on your car and not just letting it sit there until they can get to it.
Its starting to smell alot like bullshit, theres loads in every post......
Was that merry enough for you?
Thats the spirit ....
Now sing along with and I'm sure you'll remember this quote from the old days ...... however I added my personal touch to it.
Baseball --- Apple pies ---- Chevrolet ---- Kaiser
Heck my uncle Oloff has a bunch of these in his shed. Maybe I will become americas newest Icon ... Heck I see these having awsome potential on ebay. You know If I could mass produce them, I would be in the fortune 500 in no time.
----------
Quote:
Originally Posted by rx7speed
lol I have broken a bike chain once with my own legs I could only imagine how quick a car would do it
ick man what is that dried man jiz? I'm actually being serious what is that gunk?
That was just nasty to even post that .... very poor taste ......
Last edited by Jproz1167; 12-02-2007 at 02:39 PM.
Reason: Automerged Doublepost
i've got like 3 turbos on my car, its super cool and stuff...
Only 3 ???????? ..... Why settle for a .49 cent taco ... go for the big enchilada brother get 8 turbo's on that sucker .... heck dump a taco bell franchise on that bad boy ......
I just wasted a good 1/2 hour of my life reading all 108 replies to this thread...
Lets wait till he at least admits to having the car at his house again. If then no pics, well I am a non believer.
I can build one for your car too!!!!!!!! ..... Course it will cost you a good chunk of change to have something on you car that is built by me. But hey you;de have that great smile whenever you blow by corvettes.
Of course I believe you. It's in my blood believing what a person says it makes me a better man.
I didnt mean to insult you or anything...I was just trying to illistrate the fact that anyone could just make claims about what they "did". Im not saying you didnt or shouldnt have. Im all about going down the path less traveled(to an extent). I just want to see some pics of it.
I said it was an impossible task, to refer to nobody ever doing it and nobody would think of it, besides yourself. Making a non-existent thing and making it into a existent object.
well in his favor on this one I have seen people convert a non-convertable to a convertable. usually though it ends up causing problems down the road as the whole scructure of the car is different for a convertable since that top part is a very important part of bracing.
part of the reason why convertables weigh more then a non-convertable. it's due to all the extra bracing that is required that ends of weighing more then jsut the hard top alone would of had.
EDIT: though I'm assuming your not refering to that part but rather the kaiser supercharger part. oh well.
well in his favor on this one I have seen people convert a non-convertable to a convertable. usually though it ends up causing problems down the road as the whole scructure of the car is different for a convertable since that top part is a very important part of bracing.
part of the reason why convertables weigh more then a non-convertable. it's due to all the extra bracing that is required that ends of weighing more then jsut the hard top alone would of had.
EDIT: though I'm assuming your not refering to that part but rather the kaiser supercharger part. oh well.
My vette had no real extra bracing anywhere. So its coversion into a convertible was easy
__________________ 1998 Trans Am: Mystic Blue w/Tan Leather, Automatic, T-Tops, Daily Driver.... 1990 Trans Am GTA: Black w/Black Leather, 5-Speed, T-Tops, Few Mods.... 1989 Trans Am TTA: White w/Tan Leather, Automatic, T-Tops, Garage Queen.... 1986 Chevy Camaro V6: Blue w/Black Cloth, Hardtop, 355-TPI Swap, 700R4, MS-II....
$10 to snap a few pics sounds pretty fair.
I'll match it - a gentlemans word (digital handshake?)
You have until wednesday at 5pm Pacific time. If there are pictures up that convince us this has actually been built, myself and 86TA will both paypal you $10 USD.
Who wants to chip in for this? A couple people tossing in $5/10 and you'll have the thing paid for!
If not by then, i'm out. How's that for fair? 86TA, you in?
$10 to snap a few pics sounds pretty fair.
I'll match it - a gentlemans word (digital handshake?)
You have until wednesday at 5pm Pacific time. If there are pictures up that convince us this has actually been built, myself and 86TA will both paypal you $10 USD.
Who wants to chip in for this? A couple people tossing in $5/10 and you'll have the thing paid for!
If not by then, i'm out. How's that for fair? 86TA, you in?
No thanks I will pass on your offer. Although kind in many ways ... Probably illegal in all others and against rules on here .... so no deal
----------
Quote:
Originally Posted by rx7speed
for some reason I'm thinking your someone else just having fun.
you don't by chance know a driver by tha name of mason, and your boss beign bob and tom are they?
if I'm wrong that's cool no biggie.
Wow !!!!!!!!!!!!!!!! how did you guess it was me???????
Last edited by Jproz1167; 12-02-2007 at 05:08 PM.
Reason: Automerged Doublepost
Gentlemen & ladies (if there are any women reading)
Please lets stay on topic ... That being my supercharger .... If this thread gets lock I will not start another one .....
So lets keep the topic clean and stop the personal attacks .... If the thread does get locked you will all lose valuiable information to make power cheaply and easily.
No thanks I will pass on your offer. Although kind in many ways ... Probably illegal in all others and against rules on here .... so no deal
----------
Wow !!!!!!!!!!!!!!!! how did you guess it was me???????
Nice, thanks for admitting to being a total fake. Although we all already knew that this was fake. But Entertaining atleast.
well in his favor on this one I have seen people convert a non-convertable to a convertable. usually though it ends up causing problems down the road as the whole scructure of the car is different for a convertable since that top part is a very important part of bracing.
part of the reason why convertables weigh more then a non-convertable. it's due to all the extra bracing that is required that ends of weighing more then jsut the hard top alone would of had.
EDIT: though I'm assuming your not refering to that part but rather the kaiser supercharger part. oh well.
Nah, I don't think paying for information or pictures is illegal in anyway, or against the board rules actually.
I think you've just lost your last shred of credibility. Looks like no one is willing to give you any help or advice on your mythical creation, so what's the point of this thread anymore?
You don't have any questions anymore do you?
If $10 wont get you off your A$$ to post a pic I got $100 paypal that says this is all bull $hit and I am sure other members would put up some money because they know its BS too...Post a pic or let this thread die!!!!!!!!!!!!!!
Nah, I don't think paying for information or pictures is illegal in anyway, or against the board rules actually.
I think you've just lost your last shred of credibility. Looks like no one is willing to give you any help or advice on your mythical creation, so what's the point of this thread anymore?
You don't have any questions anymore do you?
Might as well let this thread die then....
Don't think I did ask for advice anywhere. I am certainly capable of doing everything by myself as proven by this accomplishment. Sure it's not the most sophisticated thing but hey, it does it's job and I am happy with it.
you are so full of male bovine fecal matter . your profile says that you are part of the i.r.s. . does that mean , internal rectal search ? i think that your head may be in that area . hope you find where it is soon ( i think the rectal area is a good place to start ) HOPE THIS THREAD GETS LOCKED OR BANNED .
From reading almost all the treads on here i can see that you are pretty much the biggest liar on the face of the earth unless proven wrong by you posting some pics of it. If this contraption some how works. Im not sure you would just go to the local auto parts store for parts that break.
Im sure you beat a corvette to.
I forgot to say that my lo3 camaro does 200 mph in reverse. Nother BS story
From reading almost all the treads on here i can see that you are pretty much the biggest liar on the face of the earth unless proven wrong by you posting some pics of it. If this contraption some how works. Im not sure you would just go to the local auto parts store for parts that break.
Im sure you beat a corvette to.
I forgot to say that my lo3 camaro does 200 mph in reverse. Nother BS story
Anything is possible with a good set of sails and a LO-3 .....
i think we should make a pilgrimage to behold this mighty accomplishment, put an image of his contraption on the back of $5 bills. maybe even erect a monument or give him a holiday to his credit... cause this line of shzit if far better and entertaining than what weve been subjected to for past almost 8 yrs.
i tell you what master of masters, pioneer of mythical power adders, king of fecal literature, rival to the gods!
I! will start the revolution to dawn your accomplishments in the light of TRUTH!...
after i have lunch with sasquatch and santa tommorw.
Ya im sure you made all that bs you said. till you post pics nobody in the world will believe you. It takes good gearing not sails. And its only 1 gear. Oh ya my 0-60 is 2 seconds 2. bett you didnt know only my camaro came stock with 800 hp. rare deal. Why do you still go on with this.
please 
